The status column for this IOT ENET interface.
This OBJECT can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
This object may only be set to createAndGo(4).
Setting this object to active(1) when its value
is already active(1) is a no-op.
Setting this object to createAndGo(4) causes the agent
to attempt to create and commit the row based on
the contents of the objects in the row. If all necessary
information is present in the row and the values are
acceptable to the agent, the agent will change the
status to active(1). If any of the necessary objects
are not available, the agent will reject the creation
request.
Setting this object to destroy(6) will remove the corresponding
entry in this table, and disable data traffic.
Parsed from file qbdws.mib.txt
Company: None
Module: QB-DWS-MIB
The status column for this IOT ENET interface.
This OBJECT can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
This object may only be set to createAndGo(4).
Setting this object to active(1) when its value
is already active(1) is a no-op.
Setting this object to createAndGo(4) causes the agent
to attempt to create and commit the row based on
the contents of the objects in the row. If all necessary
information is present in the row and the values are
acceptable to the agent, the agent will change the
status to active(1). If any of the necessary objects
are not available, the agent will reject the creation
request.
Setting this object to destroy(6) will remove the corresponding
entry in this table, and disable data traffic.
Parsed from file QB-DWS-MIB.mib
Module: QB-DWS-MIB
Vendor: Quantum Bridge
Module: QB-DWS-MIB
[Automatically extracted from oidview.com]
qbIotPktIfConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status column for this IOT ENET interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) This object may only be set to createAndGo(4). Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptable to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to destroy(6) will remove the corresponding entry in this table, and disable data traffic." ::= { qbIotPktIfConfEntry 10 }
qbIotPktIfConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status column for this IOT ENET interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) This object may only be set to createAndGo(4). Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptable to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to destroy(6) will remove the corresponding entry in this table, and disable data traffic." ::= { qbIotPktIfConfEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.1 | qbIotPktIfConfIndex | 0 | 0 | An interface index of the Ethernet port interface. |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.2 | qbAtmIfIndex | 0 | 0 | An interface index of the ATM interface that is stacked on top of the WAN/SONET interface. |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.3 | qbIotPktIfConfVpi | 0 | 0 | A VPI of the AAL5 PVC that connects this interface to the ATM cloud. This PVC is automatically configured at the SONET port of th… |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.4 | qbIotPktIfConfVci | 0 | 0 | A VCI of the AAL5 bi-directional PVC that connects this interface to the ATM cloud. This PVC is automatically configured or remov… |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.5 | qbIotPktIfConfConnName | 0 | 0 | The textual name of the connection(PVC) as specified by a user. It provides a non-volatile handle for this PVC. The supplied name… |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.6 | qbIotPktIfConfRxTrafficDescrIndex | 0 | 0 | The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this V… |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.7 | qbIotPktIfConfTxTrafficDescrIndex | 0 | 0 | qbIotPktIfConftxTrafficDescrIndex |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.8 | qbIotPktIfConfAdminStatus | 0 | 0 | The desired administrative status of the packet connection The up and down states indicate that the traffic flow is enabled or di… |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.9 | qbIotPktIfConfOperStatus | 0 | 0 | The current operational status of the connect. |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.11 | qbIotPktIfConfLoopback | 0 | 0 | This object enables loopback on the IOT ENET enedpoint. |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.12 | qbIotPktIfConfConnKind | 0 | 0 | The PVC connection type. |