aniDevTraps OBJECT IDENTIFIER ::= { aniDevTrap 0 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.2.10.0.1 | aniDevTrapSuSyncAcquired | 0 | 0 | This trap is generated by LKAD when SYNC is acquired. |
| 1.3.6.1.4.1.4325.2.10.0.2 | aniDevTrapBsuSuUp | 0 | 0 | This trap is sent out by BSU to report that SU is operational. |
| 1.3.6.1.4.1.4325.2.10.0.3 | aniDevTrapBsuSuDown | 0 | 0 | This trap is sent out by BSU to report that SU is down. |
| 1.3.6.1.4.1.4325.2.10.0.4 | aniDevTrapSuBsuUp | 0 | 0 | This trap is sent out by SU to report that BSU is operational. |
| 1.3.6.1.4.1.4325.2.10.0.5 | aniDevTrapSuBsuDown | 0 | 0 | This trap is sent out by SU to report that BSU is down. |
| 1.3.6.1.4.1.4325.2.10.0.6 | aniDevTrapDhcpFailure | 0 | 0 | This trap is generated when DHCP fails. |
| 1.3.6.1.4.1.4325.2.10.0.7 | aniDevTrapConfigDownloadFailure | 0 | 0 | This trap is generated when Config file download fails. |
| 1.3.6.1.4.1.4325.2.10.0.8 | aniDevTrapRamTooLow | 0 | 0 | This trap is sent out to indicate that the RAM is too low. |
| 1.3.6.1.4.1.4325.2.10.0.9 | aniDevTrapRamNormal | 0 | 0 | This trap is sent out to indicate that the RAM available is normal. This trap is sent out to indicate that the aniDevTrapRamTooLow… |
| 1.3.6.1.4.1.4325.2.10.0.10 | aniDevTrapModemPllNotLocked | 0 | 0 | The Modem PLL (Phase Locked Loop) not locked trap. |
| 1.3.6.1.4.1.4325.2.10.0.11 | aniDevTrapModemPllNotLockedClear | 0 | 0 | The Modem PLL (Phase Locked Loop) not locked trap cleared. This trap is sent out to indicate that the aniDevTrapModemPllNotLocked… |
| 1.3.6.1.4.1.4325.2.10.0.12 | aniDevTrapRadioVoltReg | 0 | 0 | This trap indicates a Radio Voltage Failure. It is sent out by both BSU and SU. |
| 1.3.6.1.4.1.4325.2.10.0.13 | aniDevTrapRadioVoltRegClear | 0 | 0 | This trap is sent out when aniDevTrapRadioVoltReg (Radio Voltage Failure) alarm is cleared. It is sent out by both BSU and SU. |
| 1.3.6.1.4.1.4325.2.10.0.14 | aniDevTrapRadioSynthNotLocked | 0 | 0 | This trap is generated when the Radio Synthesizer is not locked. It is sent out by BSU and SU. |
| 1.3.6.1.4.1.4325.2.10.0.15 | aniDevTrapRadioSynthNotLockedClear | 0 | 0 | This trap is sent out by BSU and SU to indicate that aniDevTrapRadioSynthNotLocked is cleared. |
| 1.3.6.1.4.1.4325.2.10.0.16 | aniDevTrapBsuFanStatus | 0 | 0 | This trap is sent out when a fan on BSU is not operational. |
| 1.3.6.1.4.1.4325.2.10.0.17 | aniDevTrapBsuFanStatusClear | 0 | 0 | This trap is sent to indicate that aniDevTrapBsuFanStatus is cleared, that is, the fan on BSU is operational again. |
| 1.3.6.1.4.1.4325.2.10.0.18 | aniDevTrapBsuDc12vStatus | 0 | 0 | This trap is generated when a 12V DC power failure occurs on the BSU. |
| 1.3.6.1.4.1.4325.2.10.0.19 | aniDevTrapBsuDc12vStatusClear | 0 | 0 | This trap indicates that aniDevTrapBsuDc12vStatus alarm on the BSU has been cleared. |
| 1.3.6.1.4.1.4325.2.10.0.20 | aniDevTrapMssPllNotLocked | 0 | 0 | The MSS PLL (Phase Locked Loop) not locked trap which is sent out by BSU. |
| 1.3.6.1.4.1.4325.2.10.0.21 | aniDevTrapMssPllNotLockedClear | 0 | 0 | This trap indicates that aniDevTrapMssPllNotLocked alarm on the BSU has been cleared. |
| 1.3.6.1.4.1.4325.2.10.0.22 | aniDevTrapBsuTempTooLow | 0 | 0 | This indicates that the temperature on the BSU is below the operating limits. A temperature sensor on the BSU checks the operatin… |
| 1.3.6.1.4.1.4325.2.10.0.23 | aniDevTrapBsuTempTooHigh | 0 | 0 | This indicates that the temperature on the BSU is above the operating limits. A temperature sensor on the BSU checks the operatin… |
| 1.3.6.1.4.1.4325.2.10.0.24 | aniDevTrapBsuTempNormal | 0 | 0 | This indicates that the temperature on the BSU is within the operating limits. It shows that either the aniDevTrapBsuTempTooLow o… |
| 1.3.6.1.4.1.4325.2.10.0.25 | aniDevTrapFlashSpaceTooLow | 0 | 0 | This trap is sent out when the disk space on file system is too low. It can be sent out by either BSU or SU. |
| 1.3.6.1.4.1.4325.2.10.0.26 | aniDevTrapFlashSpaceNormal | 0 | 0 | This trap is sent out when the disk space on file system is again normal. It can be sent out by either BSU or SU to clear the aniD… |
| 1.3.6.1.4.1.4325.2.10.0.27 | aniDevTrapNvramCorrupted | 0 | 0 | This trap is sent out when the NVRAM is corrupted. 64 kB of NVRAM is allocated from the first block of flash on both BSU and SU. … |
| 1.3.6.1.4.1.4325.2.10.0.28 | aniDevTrapNvramCorruptionClear | 0 | 0 | This trap indicates that aniDevTrapNvramCorrupted alarm has been cleared. |
| 1.3.6.1.4.1.4325.2.10.0.29 | aniDevTrapFileSysCorrupted | 0 | 0 | This trap indicates that the file system has been corrupted. It can be sent out by either BSU or SU. |
| 1.3.6.1.4.1.4325.2.10.0.30 | aniDevTrapFileSysCorruptionClear | 0 | 0 | This trap indicates that aniDevTrapFileSysCorrupted alarm has been cleared. It can be sent out by either BSU or SU. |
| 1.3.6.1.4.1.4325.2.10.0.31 | aniDevTrapSmtpConnectFailure | 0 | 0 | This trap is sent out when the connection to the SMTP server fails. It can be sent out by either BSU or SU. |
| 1.3.6.1.4.1.4325.2.10.0.32 | aniDevTrapSmtpDisabled | 0 | 0 | This trap is sent out when SMTP is disabled on the system (either BSU or SU). |
| 1.3.6.1.4.1.4325.2.10.0.33 | aniDevTrapSwWatchdogReset | 0 | 0 | This trap is sent out when SU is reset by the Software Watchdog. The Software Watchdog feature detects low memory and task suspen… |
| 1.3.6.1.4.1.4325.2.10.0.34 | aniDevTrapNatFailure | 0 | 0 | This trap is sent out when NAT failure occurs. It is sent out by SU. |
| 1.3.6.1.4.1.4325.2.10.0.35 | aniDevTrapCurrentImageCorrupted | 0 | 0 | This trap is sent out to indicate that the current image is corrupted. It can be sent out by both BSU or SU. |
| 1.3.6.1.4.1.4325.2.10.0.36 | aniDevTrapBsuSuFailedReg | 0 | 0 | This trap is sent out when the BSU-SU registration fails. |
| 1.3.6.1.4.1.4325.2.10.0.37 | aniDevTrapDefaultConfigFileNotFound | 0 | 0 | This trap is sent out when the default configuration file is not found. It can be sent out by both BSU or SU. |
| 1.3.6.1.4.1.4325.2.10.0.38 | aniDevTrapCurrentBsuState | 0 | 0 | This trap shows the current BSU State. |
| 1.3.6.1.4.1.4325.2.10.0.39 | aniDevTrapCurrentSuState | 0 | 0 | This trap shows the current SU State. |
| 1.3.6.1.4.1.4325.2.10.0.40 | aniDevTrapMemBufferTooLow | 0 | 0 | This trap is sent out when the memory buffer is too low. It can be sent out by either BSU or SU. |
| 1.3.6.1.4.1.4325.2.10.0.41 | aniDevTrapMemBufferNormal | 0 | 0 | This trap is sent out when the memory buffer is again normal. It can be sent out by either BSU or SU to clear the aniDevMemBufferT… |
| 1.3.6.1.4.1.4325.2.10.0.42 | aniDevTrapConfigFileVersionCheckFailure | 0 | 0 | This trap is sent out when there is a problem in the version of the config file. It is sent out when either the version informati… |
| 1.3.6.1.4.1.4325.2.10.0.43 | aniDevTrapDefaultFileVersionCheckFailure | 0 | 0 | This trap is sent out when there is a problem in the version of the default file. It is sent out when either the version informat… |
| 1.3.6.1.4.1.4325.2.10.0.44 | aniDevTrapConfigFileUploadFailure | 0 | 0 | This trap is sent out when the upload of the config file fails. |
| 1.3.6.1.4.1.4325.2.10.0.45 | aniDevTrapConfigFileUploadChecksumFailure | 0 | 0 | This trap is sent out when there is a checksum error on the config file after the upload. |
| 1.3.6.1.4.1.4325.2.10.0.46 | aniDevTrapRunningBaselineImage | 0 | 0 | This trap is sent out when a baseline image is running. |
| 1.3.6.1.4.1.4325.2.10.0.48 | aniDevTrapPowerSupplyFailure | 0 | 0 | This trap is sent out by the BSU when there is a power supply failure. |
| 1.3.6.1.4.1.4325.2.10.0.49 | aniDevTrapPowerSupplyNormal | 0 | 0 | This trap is sent out by the BSU when the power supply is normal again. It is sent out to indicate that the aniDevTrapPowerSupply… |
| 1.3.6.1.4.1.4325.2.10.0.50 | aniDevTrapRealtimeClockFailure | 0 | 0 | This trap is sent out by the BSU when there is a real time clock failure. |
| 1.3.6.1.4.1.4325.2.10.0.51 | aniDevTrapRealtimeClockNormal | 0 | 0 | This trap is sent out by the BSU when the real time clock is normal again. It is sent out to indicate that the aniDevTrapRealtime… |
| 1.3.6.1.4.1.4325.2.10.0.53 | aniDevTrapModelNumFailure | 0 | 0 | This trap is sent out when there is an error related to the model number. |
| 1.3.6.1.4.1.4325.2.10.0.55 | aniDevTrapConfigParseFailure | 0 | 0 | This trap is sent out when there is an error in the parsing of the configuration file. |
| 1.3.6.1.4.1.4325.2.10.0.56 | aniDevUpdateInventory | 0 | 0 | This trap is sent out to notify configuration change in SU customer name. |
| 1.3.6.1.4.1.4325.2.10.0.57 | aniDevTrapPppFailure | 0 | 0 | This trap is sent out whenever PPP fails to establish a session. |
| 1.3.6.1.4.1.4325.2.10.0.58 | aniDevTrapPppStatus | 0 | 0 | This trap is sent whenever a PPP link goes up or down. |
| 1.3.6.1.4.1.4325.2.10.0.59 | aniDevTrapFrequencyChange | 0 | 0 | This trap is sent out whenever the channel frequency is changed on the BSU and SU while they are in the operational state. |
| 1.3.6.1.4.1.4325.2.10.0.62 | aniDevTrapPPPoeSessionUp | 0 | 0 | This trap is sent out whenever the when a PPPoE Session comes up. |
| 1.3.6.1.4.1.4325.2.10.0.63 | aniDevTrapPPPoeOfferError | 0 | 0 | This trap is sent out whenever the when no valid PPPoE Active Discovery Offer (PADO) is received in response to a PPPoE Active D… |
| 1.3.6.1.4.1.4325.2.10.0.64 | aniDevTrapPPPoeSessionTerminate | 0 | 0 | This trap is sent out when a PPPoE Session is terminated. |
| 1.3.6.1.4.1.4325.2.10.0.65 | aniDevTrapEtherAutoNegotiate | 0 | 0 | This trap is sent out when device go back to auto-negotiate mode. |
| 1.3.6.1.4.1.4325.2.10.0.66 | aniDevTrapRadioInitError | 0 | 0 | This trap is sent out when the radio can't be initialized. Under an error condition this event will be generated prior to SU beco… |
| 1.3.6.1.4.1.4325.2.10.0.67 | aniDevTrapMaxPowerError | 0 | 0 | This trap is sent out when when the radio board can't reach maximum configured power. This can be caused by a combination of fau… |
| 1.3.6.1.4.1.4325.2.10.0.68 | aniDevTrapMaxPowerErrorClear | 0 | 0 | This trap is sent out when the event aniDevTrapMaxPowerError has been cleared. |
| 1.3.6.1.4.1.4325.2.10.0.69 | aniDevTrapAgcTableNotCalibrated | 0 | 0 | This trap is sent out when the AGC Table is not calibrated. SODU platform relies on accurate calibration of the receive gain thro… |
| 1.3.6.1.4.1.4325.2.10.0.70 | aniDevTrapFreqTableInvalidEntry | 0 | 0 | This trap is sent out whenever the frequency table contains an invalid entry. |
| 1.3.6.1.4.1.4325.2.10.0.71 | aniDevTrapHtmlUnzippedError | 0 | 0 | This trap is sent out when html compressed zip files are either missing or corrupted. |
| 1.3.6.1.4.1.4325.2.10.0.72 | aniDevTrapBootLineBackupUpdated | 0 | 0 | This trap is sent out whenever the backup bootline parameters are updated to bring them in sync with the actual boot parameters. |
| 1.3.6.1.4.1.4325.2.10.0.73 | aniDevTrapBootLineRestoredFromBackup | 0 | 0 | This trap is sent out when the main bootline parameters are corrupted and the system has to fall back on backup boot parameters. |
| 1.3.6.1.4.1.4325.2.10.0.74 | aniDevTrapNvramBackupUpdated | 0 | 0 | This trap is sent out whenever the backup copy of NVRAM configuration parameters is updated to bring them in sync with the actua… |
| 1.3.6.1.4.1.4325.2.10.0.75 | aniDevTrapNvramRestoredFromBackup | 0 | 0 | This trap is sent out when the main NVRAM configuration data is corrupted and the system has to fall back on backup NVRAM config… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.2.10.1 | aniDevTrapControl | 1 | 1 | None |