This parameter constraints the maximum power at
which a SU radio can transmit. This information is
conveyed to all the SUs within a WSS via the CD packet.
It is equal to the EIRP (Effective Incidental Radiated Power)
specified by the Regulatory Body.
Note: If you are using an older version of the Configuration
Manager, this object is not defined in dBm. Instead, the following
values will be displayed:
nominal(1),
one-level-above-nominal(2),
two-levels-above-nominal(3),
three-levels-above-nominal(4),
one-level-below-nominal(5),
two-levels-below-nominal(6)
Parsed from file BSUWIRELESSIF-MIB.mib
Module: BSUWIRELESSIF-MIB
Vendor: Aperto Networks
Module: BSUWIRELESSIF-MIB
[Automatically extracted from oidview.com]
aniBsuSuRadioRegPowerLimit OBJECT-TYPE SYNTAX INTEGER UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter constraints the maximum power at which a SU radio can transmit. This information is conveyed to all the SUs within a WSS via the CD packet. It is equal to the EIRP (Effective Incidental Radiated Power) specified by the Regulatory Body. Note: If you are using an older version of the Configuration Manager, this object is not defined in dBm. Instead, the following values will be displayed: nominal(1), one-level-above-nominal(2), two-levels-above-nominal(3), three-levels-above-nominal(4), one-level-below-nominal(5), two-levels-below-nominal(6) " ::= { aniBsuChannelEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.3.2.4.1.2 | aniBsuChannelFrequency | 0 | 0 | The Current Channel Center Frequency in MHz. If no radio is detected, this object will display a value of 0. When Frequency Band … |
| 1.3.6.1.4.1.4325.3.2.4.1.3 | aniBsuFrequencyBand | 0 | 0 | The Frequency Band to which the Channel Center Frequency belongs. Valid Range: 1 - 5.3 GHz UNII Band (5250 - 5350 MHz) 12 - 5.3 GHz… |
| 1.3.6.1.4.1.4325.3.2.4.1.4 | aniBsuChannelWidth | 0 | 0 | The Width of frequency channel in MHz. |
| 1.3.6.1.4.1.4325.3.2.4.1.6 | aniBsuNumServFlowsPerSu | 0 | 0 | The number of Service Flows supported per SU. |
| 1.3.6.1.4.1.4325.3.2.4.1.7 | aniBsuNumSusSupported | 0 | 0 | The number of SUs supported by this wireless port. |
| 1.3.6.1.4.1.4325.3.2.4.1.10 | aniBsuTargetFrequency | 0 | 0 | The Current Target Frequency in MHz. To change the configuration of this value, use the object aniBsuWirelessIfConfTargetFrequenc… |