This indicates the current status of the connection.
down(0) - Connection is not operating.
standby(1) - This value is not used.
primaryactive(2) - This gateway is connected to the remote
primary gateway.
failoveractive(3) - This gateway is connected to the remote
backup gateway.
backup(4) - The connection is not operating on this
gateway, but has been activated on our
backup gateway.
Parsed from file NISHAN-GTWY.mib.txt
Company: brocade
Module: NISHAN-GTWY
Vendor: Brocade
Module: NISHAN-GTWY (NISHAN-GTWY.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
rmtPeerConnectionStatus OBJECT-TYPE SYNTAX INTEGER { down(0), standby(1), primaryactive(2), failoveractive(3), backup(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current status of the connection. down(0) - Connection is not operating. standby(1) - This value is not used. primaryactive(2) - This gateway is connected to the remote primary gateway. failoveractive(3) - This gateway is connected to the remote backup gateway. backup(4) - The connection is not operating on this gateway, but has been activated on our backup gateway. " ::= { rmtPeerEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4369.1.11.2.1.1.1 | rmtPeerPrimaryIPAddress | 0 | 0 | The external IP Address of the primary remote peer gateway that this entry corresponds to. |
| 1.3.6.1.4.1.4369.1.11.2.1.1.2 | rmtPeerFailoverIPAddress | 0 | 0 | The IP Address of the failover remote peer gateway used to backup the primary peer gateway. If no backup has been configured the… |
| 1.3.6.1.4.1.4369.1.11.2.1.1.3 | rmtPeerLocalGigeIndex | 0 | 0 | The Gigabit Ethernet port index being used for this connection on the switch. |
| 1.3.6.1.4.1.4369.1.11.2.1.1.4 | rmtPeerHoldTime | 0 | 0 | The hold time, measured in seconds, used between the local and remote peers. |
| 1.3.6.1.4.1.4369.1.11.2.1.1.5 | rmtPeerExpZoneListBitMap | 0 | 0 | A bit map indicating the zones requested to be exported from the local peer to the remote peer indicated. Zone 1 is represented… |
| 1.3.6.1.4.1.4369.1.11.2.1.1.6 | rmtPeerAction | 0 | 0 | This connection is enabled by setting the remotePeerAction status to Enabled. |
| 1.3.6.1.4.1.4369.1.11.2.1.1.8 | rmtPeerConnectionDesc | 0 | 0 | A string describing the connection. Used for management purposes. |
| 1.3.6.1.4.1.4369.1.11.2.1.1.9 | rmtPeerRmtSanID | 0 | 0 | The SAN ID of the remote SAN. The format is a 4-Byte unsigned value. This is determined throught inter-gateway communication. |
| 1.3.6.1.4.1.4369.1.11.2.1.1.10 | rmtPeerRcvBytes | 0 | 0 | The total number of bytes received from the remote gateway since the connection was first established, including MAC headers and… |
| 1.3.6.1.4.1.4369.1.11.2.1.1.11 | rmtPeerXmtBytes | 0 | 0 | The total number of bytes transmitted by this gateway since the connection was first established, including MAC headers and CRC. |
| 1.3.6.1.4.1.4369.1.11.2.1.1.12 | rmtPeerConnections | 0 | 0 | The current number of initiator/target pair data connections, between the local and remote gateway, using the iFCP link. For exam… |
| 1.3.6.1.4.1.4369.1.11.2.1.1.13 | rmtPeerLatency | 0 | 0 | The round trip time (RTT) between the local and remote gateways, measured in milliseconds, of the most recent connection keep-ali… |
| 1.3.6.1.4.1.4369.1.11.2.1.1.14 | rmtPeerLostConnections | 0 | 0 | The number of initiator/target pair data connections, between the local and remote gateway, that had to be abnormally terminated… |
| 1.3.6.1.4.1.4369.1.11.2.1.1.15 | rmtPeerLostPackets | 0 | 0 | The number of TCP segments sent by this gateway that had to be retransmitted. |
| 1.3.6.1.4.1.4369.1.11.2.1.1.16 | rmtPeerTotalPackets | 0 | 0 | The number of TCP segments transmitted by this gateway. This does not recount a segment that was retransmitted. |
| 1.3.6.1.4.1.4369.1.11.2.1.1.17 | rmtPeerUpTime | 0 | 0 | The time, in hundredths of a second, since the current control connection to the remote gateway was established. This is the len… |
| 1.3.6.1.4.1.4369.1.11.2.1.1.18 | rmtPeerDiscoveredPathMtuSize | 0 | 0 | The Discovered Path Maximum Transmission Unit (MTU) Size, in bytes, is the MTU size that was discovered for the path used by thi… |
| 1.3.6.1.4.1.4369.1.11.2.1.1.19 | rmtPeerMaxMtuSize | 0 | 0 | The maximum value, in bytes, that can be used for the Maximum Transmission Unit (MTU) Size for the connection. This variable ref… |
| 1.3.6.1.4.1.4369.1.11.2.1.1.20 | rmtPeerRowStatus | 0 | 0 | This indicates the status of this entry. The row status is for creating the row entry. It does not show the status of the conne… |
| 1.3.6.1.4.1.4369.1.11.2.1.1.21 | rmtPeerTcpWindowSize | 0 | 0 | DURABLE: { 0:all } The TCP window size used for all TCP data connections in this iFCP remote connection, in KBytes. The value co… |