The table to assign trap receipient IP addresses, and the
severity level and above which the receipient should receive.
Parsed from file NISHAN-MGT.mib.txt
Company: brocade
Module: NISHAN-MGT
Vendor: Brocade
Module: NISHAN-MGT (NISHAN-MGT.mib)
Type: TABLE
Access: not-accessible
Syntax: SEQUENCE OF
Automatically extracted from www.mibdepot.com
trapAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF TrapAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table to assign trap receipient IP addresses, and the severity level and above which the receipient should receive." ::= { nishanSystem 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4369.1.3.3.1 | trapAccessEntry | 3 | 3 | Information relating to trap access |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4369.1.3.1 | memoryUtil | 1 | 1 | Shared Memory utilization of the device. |
| 1.3.6.1.4.1.4369.1.3.2 | beacon | 1 | 1 | Turn this on to blink the system. |
| 1.3.6.1.4.1.4369.1.3.4 | timeSetup | 1 | 1 | Use this value to set up the system date/time. |
| 1.3.6.1.4.1.4369.1.3.5 | readOnlyPassword | 1 | 1 | None |
| 1.3.6.1.4.1.4369.1.3.6 | readWritePassword | 1 | 1 | None |
| 1.3.6.1.4.1.4369.1.3.7 | attachedDeviceTypeOnSCSIPorts | 1 | 1 | Device type of attached devices on SCSI Ports |
| 1.3.6.1.4.1.4369.1.3.8 | nsIpAddress | 1 | 1 | IP Address of Name Server. |
| 1.3.6.1.4.1.4369.1.3.9 | systemReset | 1 | 1 | Setting this variable to true will reset the system. |
| 1.3.6.1.4.1.4369.1.3.10 | systemSCSIBusScanOption | 1 | 1 | This is used to specify the level of LUN scanning to be performed by switch for each of its SCSI BUS. |
| 1.3.6.1.4.1.4369.1.3.11 | systemNsPrimaryStatus | 1 | 1 | SOIP Name Server is available or not. |
| 1.3.6.1.4.1.4369.1.3.12 | systemSaveToFlash | 1 | 1 | Setting this variable to 1 causes the System configuration to be saved to flash. |
| 1.3.6.1.4.1.4369.1.3.13 | flashNvramVersion | 1 | 1 | DURABLE: NVRAM version number read from flash. |
| 1.3.6.1.4.1.4369.1.3.14 | currentNvramVersion | 1 | 1 | current NVRAM version that should be used. |
| 1.3.6.1.4.1.4369.1.3.15 | configurationStatus | 1 | 1 | Status of system configuration. Has it been touched since last time it was saved? |
| 1.3.6.1.4.1.4369.1.3.16 | systemLeds | 1 | 1 | A character string that contains the values of all the system LEDs. Each character represents an LED. If the LED values are not… |
| 1.3.6.1.4.1.4369.1.3.17 | systemOptions | 1 | 1 | DURABLE: { 0:all } A bitmap representing options for this switch. Bit 0 is the least significant bit. Setting a bit enables the op… |
| 1.3.6.1.4.1.4369.1.3.19 | softwareBundleString | 1 | 1 | This value will reflect the supported features for the version of the software running on this switch. For ex: if the s/w versio… |