An index that uniquely identifies a port in the Nishan/FC
Interface Table. This is a linear port number that may
may have holes (e.g., missing units). For this MIB,
32 port numbers are reserved for each unit in the stack.
For example, port 101 is unit 4, port 5
Parsed from file NISHAN-COM.mib.txt
Company: brocade
Module: NISHAN-COMMON-MIB
Vendor: Brocade
Module: NISHAN-COMMON-MIB (NISHAN-COM.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
(
1..128 )
Automatically extracted from www.mibdepot.com
nishanArchIfaceLogicalPort OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies a port in the Nishan/FC Interface Table. This is a linear port number that may may have holes (e.g., missing units). For this MIB, 32 port numbers are reserved for each unit in the stack. For example, port 101 is unit 4, port 5" ::= { nishanArchIfaceEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4369.2.2.1.1.1.1 | nishanArchIfaceUnit | 0 | 0 | An index that uniquely identifies a unit in the Nishan/FC Interface Table. |
| 1.3.6.1.4.1.4369.2.2.1.1.1.2 | nishanArchIfacePort | 0 | 0 | An index that uniquely identifies a port within the unit in the Nishan/FC Interface Table. |
| 1.3.6.1.4.1.4369.2.2.1.1.1.4 | nishanArchIfaceName | 0 | 0 | The textual name of this interface, e.g., 'John'. |
| 1.3.6.1.4.1.4369.2.2.1.1.1.5 | nishanArchIfaceType | 0 | 0 | The type of interface, repeated here from the definitions in RFC1213 as a matter of convenience. |
| 1.3.6.1.4.1.4369.2.2.1.1.1.6 | nishanArchIfaceEnable | 0 | 0 | Enable (1) and Disable (2) control for the interface. For this product, this is the ONLY way to enable or disable the interface. … |
| 1.3.6.1.4.1.4369.2.2.1.1.1.7 | nishanArchIfaceSTPEnable | 0 | 0 | Enable (1) and Disable (2) Spanning Tree operation for this interface. |
| 1.3.6.1.4.1.4369.2.2.1.1.1.8 | nishanArchIfaceLink | 0 | 0 | The state of Link Detect on the interface. |
| 1.3.6.1.4.1.4369.2.2.1.1.1.9 | nishanArchIfaceDuplexSpeedSet | 0 | 0 | he desired speed and duplex for the interface. If the selected control is not possible on the interface, a value of (99) illegal … |
| 1.3.6.1.4.1.4369.2.2.1.1.1.10 | nishanArchIfaceDuplexSpeedGet | 0 | 0 | The actual speed and duplex for the interface. If the interface is not configured to one of the acceptable values, a value of ill… |
| 1.3.6.1.4.1.4369.2.2.1.1.1.11 | nishanArchIfaceTXOctetsNoErr | 0 | 0 | The number of octets transmitted from the interface. This number does not include octets in error. |
| 1.3.6.1.4.1.4369.2.2.1.1.1.12 | nishanArchIfaceTXPacketsNoErr | 0 | 0 | The number of packets transmitted from the interface. This number does not include packets in error. |
| 1.3.6.1.4.1.4369.2.2.1.1.1.13 | nishanArchIfaceRXOctetsNoErr | 0 | 0 | The number of octets received on the interface. This number does not include octets in error. |
| 1.3.6.1.4.1.4369.2.2.1.1.1.14 | nishanArchIfaceRXPacketsNoErr | 0 | 0 | The number of packets received on the interface. This number does not include packets in error. |