Description 1
The RSTP BPDUs received on a specific port.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.4413.1.1.1.2.15.9.1.4
The RSTP BPDUs received on a specific port.
Identification
{1 3 6 1 4 1 4413 1 1 1 2 15 9 1 4}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enable | 2 |
| 2 | disable | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4413.1.1.1.2.15.9.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
agentStpPortStatsRstpBpduRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RSTP BPDUs received on a specific port."
::= { agentStpPortEntry 4 }agentStpCstPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative state of a specific port in CIST.
enable(1) - enables the port.
disable(2) - disables the port.
The default port state is disabled."
::= { agentStpCstPortEntry 4 }agentStpCstPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative state of a specific port in CIST.
enable(1) - enables the port.
disable(2) - disables the port.
The default port state is disabled. For the M6220, the default port state
is enabled for internal ports and disabled for external ports."
::= { agentStpCstPortEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The RSTP BPDUs received on a specific port.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Description 3
The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled. For the M6220, the default port state is enabled for internal ports and disabled for external ports.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentStpPortStatsRstpBpduRx
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentStpPortStatsRstpBpduRx",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The RSTP BPDUs received on a specific port.\"",
"::=",
"{",
"agentStpPortEntry",
"4",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The RSTP BPDUs received on a specific port."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: EdgeSwitch-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'EdgeSwitch-REF-MIB': ['fastPath', 'AgentPortMask'], 'EdgeSwitch-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Status in source: current.
Names: agentStpCstPortEdge
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentStpCstPortEdge",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled.\"",
"::=",
"{",
"agentStpCstPortEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: EdgeSwitch-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'EdgeSwitch-REF-MIB': ['fastPath', 'AgentPortMask'], 'EdgeSwitch-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: EdgeSwitch-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'EdgeSwitch-REF-MIB': ['fastPath', 'AgentPortMask'], 'EdgeSwitch-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Status in source: current.
Names: agentStpCstPortEdge
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentStpCstPortEdge",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled. For the M6220, the default port state is enabled for internal ports and disabled for external ports.\"",
"::=",
"{",
"agentStpCstPortEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled. For the M6220, the default port state is enabled for internal ports and disabled for external ports."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: FASTPATH-SWITCHING-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'MacAddress', 'TruthValue', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'BROADCOM-REF-MIB': ['fastPath', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.1 | agentStpPortState, agentStpCstPortOperEdge | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.2 | agentStpPortStatsMstpBpduRx, agentStpCstPortOperPointToPoint | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.3 | agentStpPortStatsMstpBpduTx, agentStpCstPortTopologyChangeAck | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.5 | agentStpPortStatsRstpBpduTx, agentStpCstPortForwardingState | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.6 | agentStpPortStatsStpBpduRx, agentStpCstPortId | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.7 | agentStpPortStatsStpBpduTx, agentStpCstPortPathCost | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.8 | agentStpPortUpTime, agentStpCstPortPriority | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.9 | agentStpPortMigrationCheck, agentStpCstDesignatedBridgeId | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.10 | agentStpPortHelloTime, agentStpCstDesignatedCost | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.11 | agentStpCstDesignatedPortId | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.12 | agentStpCstExtPortPathCost | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.13 | agentStpCstPortBpduGuardEffect | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.14 | agentStpCstPortBpduFilter | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.15 | agentStpCstPortBpduFlood | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.16 | agentStpCstPortAutoEdge | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.17 | agentStpCstPortRootGuard | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.18 | agentStpCstPortTCNGuard | 0 | 0 | |
| 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.19 | agentStpCstPortLoopGuard | 0 | 0 |