This attribute indicates the format of the layer 3
protocol ID in the Ethernet packet. A value of 'none'
means that the rule does not use the layer 3 protocol
type as a matching criteria. A value of 'ethertype'
means that the rule applies only to frames that contain
an EtherType value. EtherType values are contained
in packets using the DEC-Intel-Xerox (DIX) encapsulation
or the RFC 1042 Sub-Network Access Protocol
(SNAP) encapsulation formats. A value of 'dsap' means
that the rule applies only to frames using the IEEE802.3
encapsulation format with a Destination Service
Access Point (DSAP) other than 0xAA (which is reserved
for SNAP). A value of 'mac' means that the rule
applies only to MAC management messages for MAC management
messages. A value of 'all' means that the rule
matches all Ethernet packets. If the Ethernet frame
contains an 802.1P/Q Tag header (i.e., EtherType
0x8100), this attribute applies to the embedded EtherType
field within the 802.1p/Q header.
The value 'mac' is only used for passing UDCs to CMs during
Registration. The CMTS ignores filter rules that include
the value of this attribute set to 'mac' for CMTS enforced
upstream and downstream subscriber management filter group
rules.
Parsed from file DOCS-SUBMGT3-MIB.mib
Module: DOCS-SUBMGT3-MIB
This attribute indicates the format of the layer 3
protocol ID in the Ethernet packet. A value of 'none'
means that the rule does not use the layer 3 protocol
type as a matching criteria. A value of 'ethertype'
means that the rule applies only to frames that contain
an EtherType value. EtherType values are contained
in packets using the DEC-Intel-Xerox (DIX) encapsulation
or the RFC 1042 Sub-Network Access Protocol
(SNAP) encapsulation formats. A value of 'dsap' means
that the rule applies only to frames using the IEEE802.3
encapsulation format with a Destination Service
Access Point (DSAP) other than 0xAA (which is reserved
for SNAP). A value of 'mac' means that the rule
applies only to MAC management messages for MAC management
messages. A value of 'all' means that the rule
matches all Ethernet packets. If the Ethernet frame
contains an 802.1P/Q Tag header (i.e., EtherType
0x8100), this attribute applies to the embedded EtherType
field within the 802.1p/Q header.
The value 'mac' is only used for passing UDCs to CMs during
Registration. The CMTS ignores filter rules that include
the value of this attribute set to 'mac' for CMTS enforced
upstream and downstream subscriber management filter group
rules.
This attribute indicates the format of the layer 3
protocol ID in the Ethernet packet. A value of 'none'
means that the rule does not use the layer 3 protocol
type as a matching criteria. A value of 'ethertype'
means that the rule applies only to frames that contain
an EtherType value. EtherType values are contained
in packets using the DEC-Intel-Xerox (DIX) encapsulation
or the RFC 1042 Sub-Network Access Protocol
(SNAP) encapsulation formats. A value of 'dsap' means
that the rule applies only to frames using the IEEE802.3
encapsulation format with a Destination Service
Access Point (DSAP) other than 0xAA (which is reserved
for SNAP). A value of 'mac' means that the rule
applies only to MAC management messages for MAC management
messages. A value of 'all' means that the rule
matches all Ethernet packets. If the Ethernet frame
contains an 802.1P/Q Tag header (i.e., EtherType
0x8100), this attribute applies to the embedded EtherType
field within the 802.1p/Q header.
The value 'mac' is only used for passing UDCs to CMs during
Registration. The CMTS ignores filter rules that include
the value of this attribute set to 'mac' for CMTS enforced
upstream and downstream subscriber management filter group
rules.
Parsed from file DOCS-SUBMGT3-MIB.my.txt
Company: None
Module: DOCS-SUBMGT3-MIB
This attribute indicates the format of the layer 3
protocol ID in the Ethernet packet. A value of 'none'
means that the rule does not use the layer 3 protocol
type as a matching criteria. A value of 'ethertype'
means that the rule applies only to frames that contain
an EtherType value. EtherType values are contained
in packets using the DEC-Intel-Xerox (DIX) encapsulation
or the RFC 1042 Sub-Network Access Protocol
(SNAP) encapsulation formats. A value of 'dsap' means
that the rule applies only to frames using the IEEE802.3
encapsulation format with a Destination Service
Access Point (DSAP) other than 0xAA (which is reserved
for SNAP). A value of 'mac' means that the rule
applies only to MAC management messages for MAC management
messages. A value of 'all' means that the rule
matches all Ethernet packets. If the Ethernet frame
contains an 802.1P/Q Tag header (i.e., EtherType
0x8100), this attribute applies to the embedded EtherType
field within the 802.1p/Q header.
The value 'mac' is only used for passing UDCs to CMs during
Registration. The CMTS ignores filter rules that include
the value of this attribute set to 'mac' for CMTS enforced
upstream and downstream subscriber management filter group
rules.
docsSubmgt3FilterGrpEnetProtocolType OBJECT-TYPE SYNTAX INTEGER { none(0), ethertype(1), dsap(2), mac(3), all(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute indicates the format of the layer 3 protocol ID in the Ethernet packet. A value of 'none' means that the rule does not use the layer 3 protocol type as a matching criteria. A value of 'ethertype' means that the rule applies only to frames that contain an EtherType value. EtherType values are contained in packets using the DEC-Intel-Xerox (DIX) encapsulation or the RFC 1042 Sub-Network Access Protocol (SNAP) encapsulation formats. A value of 'dsap' means that the rule applies only to frames using the IEEE802.3 encapsulation format with a Destination Service Access Point (DSAP) other than 0xAA (which is reserved for SNAP). A value of 'mac' means that the rule applies only to MAC management messages for MAC management messages. A value of 'all' means that the rule matches all Ethernet packets. If the Ethernet frame contains an 802.1P/Q Tag header (i.e., EtherType 0x8100), this attribute applies to the embedded EtherType field within the 802.1p/Q header. The value 'mac' is only used for passing UDCs to CMs during Registration. The CMTS ignores filter rules that include the value of this attribute set to 'mac' for CMTS enforced upstream and downstream subscriber management filter group rules." REFERENCE "RFC1042 Sub-Network Access Protocol (SNAP) encapsulation formats." DEFVAL { none } ::= { docsSubmgt3FilterGrpEntry 21 }
docsSubmgt3FilterGrpEnetProtocolType OBJECT-TYPE SYNTAX INTEGER { none(0), ethertype(1), dsap(2), mac(3), all(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the format of the layer 3 protocol ID in the Ethernet packet. A value of 'none' means that the rule does not use the layer 3 protocol type as a matching criteria. A value of 'ethertype' means that the rule applies only to frames that contain an EtherType value. EtherType values are contained in packets using the DEC-Intel-Xerox (DIX) encapsulation or the RFC 1042 Sub-Network Access Protocol (SNAP) encapsulation formats. A value of 'dsap' means that the rule applies only to frames using the IEEE802.3 encapsulation format with a Destination Service Access Point (DSAP) other than 0xAA (which is reserved for SNAP). A value of 'mac' means that the rule applies only to MAC management messages for MAC management messages. A value of 'all' means that the rule matches all Ethernet packets. If the Ethernet frame contains an 802.1P/Q Tag header (i.e., EtherType 0x8100), this attribute applies to the embedded EtherType field within the 802.1p/Q header. The value 'mac' is only used for passing UDCs to CMs during Registration. The CMTS ignores filter rules that include the value of this attribute set to 'mac' for CMTS enforced upstream and downstream subscriber management filter group rules." REFERENCE "RFC1042 Sub-Network Access Protocol (SNAP) encapsulation formats." DEFVAL { none } ::= { docsSubmgt3FilterGrpEntry 21 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-SUBMGT3-MIB
[Automatically extracted from oidview.com]
docsSubmgt3FilterGrpEnetProtocolType OBJECT-TYPE SYNTAX INTEGER { none(0), ethertype(1), dsap(2), mac(3), all(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute indicates the format of the layer 3 protocol ID in the Ethernet packet. A value of 'none' means that the rule does not use the layer 3 protocol type as a matching criteria. A value of 'ethertype' means that the rule applies only to frames that contain an EtherType value. EtherType values are contained in packets using the DEC-Intel-Xerox (DIX) encapsulation or the RFC 1042 Sub-Network Access Protocol (SNAP) encapsulation formats. A value of 'dsap' means that the rule applies only to frames using the IEEE802.3 encapsulation format with a Destination Service Access Point (DSAP) other than 0xAA (which is reserved for SNAP). A value of 'mac' means that the rule applies only to MAC management messages for MAC management messages. A value of 'all' means that the rule matches all Ethernet packets. If the Ethernet frame contains an 802.1P/Q Tag header (i.e., EtherType 0x8100), this attribute applies to the embedded EtherType field within the 802.1p/Q header. The value 'mac' is only used for passing UDCs to CMs during Registration. The CMTS ignores filter rules that include the value of this attribute set to 'mac' for CMTS enforced upstream and downstream subscriber management filter group rules." REFERENCE "RFC1042 Sub-Network Access Protocol (SNAP) encapsulation formats." DEFVAL { none } ::= { docsSubmgt3FilterGrpEntry 21 }
docsSubmgt3FilterGrpEnetProtocolType OBJECT-TYPE SYNTAX INTEGER { none(0), ethertype(1), dsap(2), mac(3), all(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute indicates the format of the layer 3 protocol ID in the Ethernet packet. A value of 'none' means that the rule does not use the layer 3 protocol type as a matching criteria. A value of 'ethertype' means that the rule applies only to frames that contain an EtherType value. EtherType values are contained in packets using the DEC-Intel-Xerox (DIX) encapsulation or the RFC 1042 Sub-Network Access Protocol (SNAP) encapsulation formats. A value of 'dsap' means that the rule applies only to frames using the IEEE802.3 encapsulation format with a Destination Service Access Point (DSAP) other than 0xAA (which is reserved for SNAP). A value of 'mac' means that the rule applies only to MAC management messages for MAC management messages. A value of 'all' means that the rule matches all Ethernet packets. If the Ethernet frame contains an 802.1P/Q Tag header (i.e., EtherType 0x8100), this attribute applies to the embedded EtherType field within the 802.1p/Q header. The value 'mac' is only used for passing UDCs to CMs during Registration. The CMTS ignores filter rules that include the value of this attribute set to 'mac' for CMTS enforced upstream and downstream subscriber management filter group rules." REFERENCE "RFC1042 Sub-Network Access Protocol (SNAP) encapsulation formats." DEFVAL { none } ::= { docsSubmgt3FilterGrpEntry 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.1 | docsSubmgt3FilterGrpGrpId | 0 | 0 | This key is an identifier for a set of classifiers known as a filter group. Each CM may be associated with several filter groups … |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.2 | docsSubmgt3FilterGrpRuleId | 0 | 0 | This key represents an ordered classifier identifier within the group. Filters are applied in order if the Priority attribute is… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.3 | docsSubmgt3FilterGrpAction | 0 | 0 | This attribute represents the action to take upon this filter matching. 'permit' means to stop the classification matching and a… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.4 | docsSubmgt3FilterGrpPriority | 0 | 0 | This attribute defines the order in which classifiers are compared against packets. The higher the value, the higher the priority. |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.5 | docsSubmgt3FilterGrpIpTosLow | 0 | 0 | This attribute represents the low value of a range of ToS (Type of Service) octet values. This object is defined as an 8-bit octe… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.6 | docsSubmgt3FilterGrpIpTosHigh | 0 | 0 | This attribute represents the high value of a range of ToS octet values. This object is defined as an 8-bit octet as per the DOCS… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.7 | docsSubmgt3FilterGrpIpTosMask | 0 | 0 | This attribute represents the mask value that is bitwise ANDed with ToS octet in an IP packet, and the resulting value is used fo… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.8 | docsSubmgt3FilterGrpIpProtocol | 0 | 0 | This attribute represents the value of the IP Protocol field required for IP packets to match this rule. The value 256 matches tr… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.9 | docsSubmgt3FilterGrpInetAddrType | 0 | 0 | The type of the Internet address for InetSrcAddr, InetSrcMask, InetDestAddr, and InetDestMask. |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.10 | docsSubmgt3FilterGrpInetSrcAddr | 0 | 0 | This attribute specifies the value of the IP Source Address required for packets to match this rule. An IP packet matches the rul… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.11 | docsSubmgt3FilterGrpInetSrcMask | 0 | 0 | This attribute represents which bits of a packet's IP Source Address are compared to match this rule. An IP packet matches the ru… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.12 | docsSubmgt3FilterGrpInetDestAddr | 0 | 0 | This attribute specifies the value of the IP Destination Address required for packets to match this rule. An IP packet matches th… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.13 | docsSubmgt3FilterGrpInetDestMask | 0 | 0 | This attribute represents which bits of a packet's IP Destination Address are compared to match this rule. An IP packet matches t… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.14 | docsSubmgt3FilterGrpSrcPortStart | 0 | 0 | This attribute represents the low-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This attribut… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.15 | docsSubmgt3FilterGrpSrcPortEnd | 0 | 0 | This attribute represents the high-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This attribu… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.16 | docsSubmgt3FilterGrpDestPortStart | 0 | 0 | This attribute represents the low-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. This att… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.17 | docsSubmgt3FilterGrpDestPortEnd | 0 | 0 | This attribute represents the high-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. This at… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.18 | docsSubmgt3FilterGrpDestMacAddr | 0 | 0 | This attribute represents the criteria to match against an Ethernet packet MAC address bitwise ANDed with DestMacMask. |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.19 | docsSubmgt3FilterGrpDestMacMask | 0 | 0 | An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with the DestMacMask attribute equals the valu… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.20 | docsSubmgt3FilterGrpSrcMacAddr | 0 | 0 | This attribute represents the value to match against an Ethernet packet source MAC address. |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.22 | docsSubmgt3FilterGrpEnetProtocol | 0 | 0 | This attribute represents the Ethernet protocol type to be matched against the packets. For EnetProtocolType set to 'none', this … |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.23 | docsSubmgt3FilterGrpUserPriLow | 0 | 0 | This attribute applies only to Ethernet frames using the 802.1p/Q tag header (indicated with EtherType 0x8100). Such frames inclu… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.24 | docsSubmgt3FilterGrpUserPriHigh | 0 | 0 | This attribute applies only to Ethernet frames using the 802.1p/Q tag header (indicated with EtherType 0x8100). Such frames inclu… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.25 | docsSubmgt3FilterGrpVlanId | 0 | 0 | This attribute applies only to Ethernet frames using the 802.1p/Q tag header. Tagged packets must have a VLAN Identifier that mat… |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.26 | docsSubmgt3FilterGrpClassPkts | 0 | 0 | This attribute counts the number of packets that have been classified (matched) using this rule entry. This includes all packets … |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.27 | docsSubmgt3FilterGrpFlowLabel | 0 | 0 | This attribute represents the Flow Label field in the IPv6 header to be matched by the classifier. The value zero indicates that … |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.28 | docsSubmgt3FilterGrpCmInterfaceMask | 0 | 0 | This attribute represents a bit-mask of the CM in-bound interfaces to which this classifier applies. This attribute only applies … |
| 1.3.6.1.4.1.4491.2.1.10.1.5.1.29 | docsSubmgt3FilterGrpRowStatus | 0 | 0 | The conceptual row status of this object. |