Reference record for OID 1.3.6.1.4.1.4491.2.1.11.1.5.1.1



parent
1.3.6.1.4.1.4491.2.1.11.1.5.1 (docsSecSavCmAuthEntry)
node code
1
node name
docsSecSavCmAuthGrpName
dot oid
1.3.6.1.4.1.4491.2.1.11.1.5.1.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsSecMib(11) docsSecMibObjects(1) docsSecSavCmAuthTable(5) docsSecSavCmAuthEntry(1) docsSecSavCmAuthGrpName(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsSecMib(11) docsSecMibObjects(1) docsSecSavCmAuthTable(5) docsSecSavCmAuthEntry(1) docsSecSavCmAuthGrpName(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsSecMib(11) docsSecMibObjects(1) docsSecSavCmAuthTable(5) docsSecSavCmAuthEntry(1) docsSecSavCmAuthGrpName(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsSecMib(11) docsSecMibObjects(1) docsSecSavCmAuthTable(5) docsSecSavCmAuthEntry(1) docsSecSavCmAuthGrpName(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsSecMib(11) docsSecMibObjects(1) docsSecSavCmAuthTable(5) docsSecSavCmAuthEntry(1) docsSecSavCmAuthGrpName(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsSecMib(11) docsSecMibObjects(1) docsSecSavCmAuthTable(5) docsSecSavCmAuthEntry(1) docsSecSavCmAuthGrpName(1)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsSecMib/docsSecMibObjects/docsSecSavCmAuthTable/docsSecSavCmAuthEntry/docsSecSavCmAuthGrpName
  • /iso/identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsSecMib/docsSecMibObjects/docsSecSavCmAuthTable/docsSecSavCmAuthEntry/docsSecSavCmAuthGrpName
  • /iso/org/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsSecMib/docsSecMibObjects/docsSecSavCmAuthTable/docsSecSavCmAuthEntry/docsSecSavCmAuthGrpName
  • /iso/org/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsSecMib/docsSecMibObjects/docsSecSavCmAuthTable/docsSecSavCmAuthEntry/docsSecSavCmAuthGrpName
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsSecMib/docsSecMibObjects/docsSecSavCmAuthTable/docsSecSavCmAuthEntry/docsSecSavCmAuthGrpName
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsSecMib/docsSecMibObjects/docsSecSavCmAuthTable/docsSecSavCmAuthEntry/docsSecSavCmAuthGrpName
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/4491/2/1/11/1/5/1/1

    Description by circitor

    This attribute references the Name attribute of the
    SavCfgList object of a CM. If the CM signaled group
    name is not configured in the CMTS, the CMTS ignores this
    attribute value for the purpose of Source Address
    Verification. The CMTS must allow the modification
    of the GrpName object and use the updated SAV rules for
    newly discovered CPEs from CMs. When a source IP address
    is claimed by two CMs (e.g., detected as duplicated),
    the CMTS must use the current SAV rules defined
    for both CMs in case the SAV GrpName rules may have been
    updated. In the case of a persisting conflict, it is
    up to vendor-implementation to decide what CM should
    hold the SAV authorization.
    The zero-length string indicates that no SAV Group was
    signaled by the CM. The zero-length value or a non-existing
    reference in the SavCfgList object means the
    SavCfgListName is ignored for the purpose of SAV.

    Parsed from file DOCS-SEC-MIB.mib
    Module: DOCS-SEC-MIB

    Description by cisco_v1

    This attribute references the Name attribute of the
    SavCfgList object of a CM. If the CM signaled group
    name is not configured in the CMTS, the CMTS ignores this
    attribute value for the purpose of Source Address
    Verification. The CMTS must allow the modification
    of the GrpName object and use the updated SAV rules for
    newly discovered CPEs from CMs. When a source IP address
    is claimed by two CMs (e.g., detected as duplicated),
    the CMTS must use the current SAV rules defined
    for both CMs in case the SAV GrpName rules may have been
    updated. In the case of a persisting conflict, it is
    up to vendor-implementation to decide what CM should
    hold the SAV authorization.
    The zero-length string indicates that no SAV Group was
    signaled by the CM. The zero-length value or a non-existing
    reference in the SavCfgList object means the
    SavCfgListName is ignored for the purpose of SAV.

    Description by mibdepot

    This attribute references the Name attribute of the
    SavCfgList object of a CM. If the CM signaled group
    name is not configured in the CMTS, the CMTS ignores this
    attribute value for the purpose of Source Address
    Verification. The CMTS must allow the modification
    of the GrpName object and use the updated SAV rules for
    newly discovered CPEs from CMs. When a source IP address
    is claimed by two CMs (e.g., detected as duplicated),
    the CMTS must use the current SAV rules defined
    for both CMs in case the SAV GrpName rules may have been
    updated. In the case of a persisting conflict, it is
    up to vendor-implementation to decide what CM should
    hold the SAV authorization.
    The zero-length string indicates that no SAV Group was
    signaled by the CM. The zero-length value or a non-existing
    reference in the SavCfgList object means the
    SavCfgListName is ignored for the purpose of SAV.

    Parsed from file DOCS-SEC-MIB.my.txt
    Company: None
    Module: DOCS-SEC-MIB

    Description by cisco

    This attribute references the Name attribute of the
    SavCfgList object of a CM. If the CM signaled group
    name is not configured in the CMTS, the CMTS ignores this
    attribute value for the purpose of Source Address
    Verification. The CMTS must allow the modification
    of the GrpName object and use the updated SAV rules for
    newly discovered CPEs from CMs. When a source IP address
    is claimed by two CMs (e.g., detected as duplicated),
    the CMTS must use the current SAV rules defined
    for both CMs in case the SAV GrpName rules may have been
    updated. In the case of a persisting conflict, it is
    up to vendor-implementation to decide what CM should
    hold the SAV authorization.
    The zero-length string indicates that no SAV Group was
    signaled by the CM. The zero-length value or a non-existing
    reference in the SavCfgList object means the
    SavCfgListName is ignored for the purpose of SAV.

    Information by circitor

    docsSecSavCmAuthGrpName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This attribute references the Name attribute of the
        SavCfgList object of a CM. If the CM signaled group
        name is not configured in the CMTS, the CMTS ignores this
        attribute value for the purpose of Source Address
        Verification. The CMTS must allow the modification
        of the GrpName object and use the updated SAV rules for
        newly discovered CPEs from CMs. When a source IP address
        is claimed by two CMs (e.g., detected as duplicated),
        the CMTS must use the current SAV rules defined
        for both CMs in case the SAV GrpName rules may have been
        updated. In the case of a persisting conflict, it is
        up to vendor-implementation to decide what CM should
        hold the SAV authorization.
        The zero-length string indicates that no SAV Group was
        signaled by the CM. The zero-length value or a non-existing
        reference in the SavCfgList object means the
        SavCfgListName is ignored for the purpose of SAV."
    REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804,
         Common Radio Frequency Interface Encodings Annex." 
    ::= { docsSecSavCmAuthEntry 1 }

    Information by cisco_v1

    docsSecSavCmAuthGrpName OBJECT-TYPE
    SYNTAX SnmpAdminString

    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This attribute references the Name attribute of the
        SavCfgList object of a CM. If the CM signaled group
        name is not configured in the CMTS, the CMTS ignores this
        attribute value for the purpose of Source Address
        Verification. The CMTS must allow the modification
        of the GrpName object and use the updated SAV rules for
        newly discovered CPEs from CMs. When a source IP address
        is claimed by two CMs (e.g., detected as duplicated),
        the CMTS must use the current SAV rules defined
        for both CMs in case the SAV GrpName rules may have been
        updated. In the case of a persisting conflict, it is
        up to vendor-implementation to decide what CM should
        hold the SAV authorization.
        The zero-length string indicates that no SAV Group was
        signaled by the CM. The zero-length value or a non-existing
        reference in the SavCfgList object means the
        SavCfgListName is ignored for the purpose of SAV."
    REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804,
         Common Radio Frequency Interface Encodings Annex."
    ::= { docsSecSavCmAuthEntry 1 }

    Information by oid_info

    Vendor: Cable Television Laboratories, Inc.
    Module: DOCS-SEC-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    docsSecSavCmAuthGrpName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This attribute references the Name attribute of the
        SavCfgList object of a CM. If the CM signaled group
        name is not configured in the CMTS, the CMTS ignores this
        attribute value for the purpose of Source Address
        Verification. The CMTS must allow the modification
        of the GrpName object and use the updated SAV rules for
        newly discovered CPEs from CMs. When a source IP address
        is claimed by two CMs (e.g., detected as duplicated),
        the CMTS must use the current SAV rules defined
        for both CMs in case the SAV GrpName rules may have been
        updated. In the case of a persisting conflict, it is
        up to vendor-implementation to decide what CM should
        hold the SAV authorization.
        The zero-length string indicates that no SAV Group was
        signaled by the CM. The zero-length value or a non-existing
        reference in the SavCfgList object means the
        SavCfgListName is ignored for the purpose of SAV."
    REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804,
         Common Radio Frequency Interface Encodings Annex." 
    ::= { docsSecSavCmAuthEntry 1 }

    Information by cisco

    docsSecSavCmAuthGrpName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This attribute references the Name attribute of the
        SavCfgList object of a CM. If the CM signaled group
        name is not configured in the CMTS, the CMTS ignores this
        attribute value for the purpose of Source Address
        Verification. The CMTS must allow the modification
        of the GrpName object and use the updated SAV rules for
        newly discovered CPEs from CMs. When a source IP address
        is claimed by two CMs (e.g., detected as duplicated),
        the CMTS must use the current SAV rules defined
        for both CMs in case the SAV GrpName rules may have been
        updated. In the case of a persisting conflict, it is
        up to vendor-implementation to decide what CM should
        hold the SAV authorization.
        The zero-length string indicates that no SAV Group was
        signaled by the CM. The zero-length value or a non-existing
        reference in the SavCfgList object means the
        SavCfgListName is ignored for the purpose of SAV."
    REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804,
         Common Radio Frequency Interface Encodings Annex." 
    ::= { docsSecSavCmAuthEntry 1 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Ralph Brown

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Maria Stachelek

    Brothers (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.4491.2.1.11.1.5.1.2 docsSecSavCmAuthStaticPrefixListId 0 0 This attribute identifies the reference to a CMTS
    created subnet prefix list based on the CM signaled static
    prefix list TLV elem…