This object provides visibility to the mode of
operation to which the DOCSIS eRouter eSAFE element
was set via TLV in the cable modem configuration file.
If the value of this object is disabled(1), the
eRouter was configured via TLV in the cable modem
configuration file to not initialize as described
in the eRouter Initialization section of the CableLabs
IPv4 and IPv6 eRouter Specification.
If the value of this object is ipv4Only(2), the
eRouter was configured via TLV in the cable modem
configuration file to operate with an IPv4 network
address and with the IPv4 stack operational and to
operate without an IPv6 network address and to not
run an IPv6 protocol stack.
If the value of this object is ipv6Only(3), the
eRouter was configured via TLV in the cable modem
configuration file to operate with an IPv6 network
address and with the IPv6 stack operational and to
operate without an IPv4 network address and to not
run an IPv4 protocol stack.
If the value of this object is ipv4AndIpv6(4), the
eRouter was configured via TLV in the cable modem
configuration file to operate with an IPv4 network
address and an IPv6 network address and to run both
IPv4 and IPv6 protocol stacks.
Parsed from file ESAFE-MIB.mib
Module: ESAFE-MIB
Vendor: Cable Television Laboratories, Inc.
Module: ESAFE-MIB
[Automatically extracted from oidview.com]
esafeErouterAdminMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), ipv4Only(2), ipv6Only(3), ipv4AndIpv6(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides visibility to the mode of operation to which the DOCSIS eRouter eSAFE element was set via TLV in the cable modem configuration file. If the value of this object is disabled(1), the eRouter was configured via TLV in the cable modem configuration file to not initialize as described in the eRouter Initialization section of the CableLabs IPv4 and IPv6 eRouter Specification. If the value of this object is ipv4Only(2), the eRouter was configured via TLV in the cable modem configuration file to operate with an IPv4 network address and with the IPv4 stack operational and to operate without an IPv6 network address and to not run an IPv6 protocol stack. If the value of this object is ipv6Only(3), the eRouter was configured via TLV in the cable modem configuration file to operate with an IPv6 network address and with the IPv6 stack operational and to operate without an IPv4 network address and to not run an IPv4 protocol stack. If the value of this object is ipv4AndIpv6(4), the eRouter was configured via TLV in the cable modem configuration file to operate with an IPv4 network address and an IPv6 network address and to run both IPv4 and IPv6 protocol stacks." REFERENCE "DOCSIS IPv4 and IPv6 eRouter Specification, CM-SP-eRouter-I02-070223." ::= { esafeErouterMibObjects 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4491.2.1.14.1.5.2 | esafeErouterOperMode | 0 | 0 | This object provides visibility to the current mode of operation of the DOCSIS eRouter eSAFE element of the eDOCSIS compliant dev… |
1.3.6.1.4.1.4491.2.1.14.1.5.3 | esafeErouterPhysAddress | 0 | 0 | The physical address of the operator-facing interface of the DOCSIS eRouter eSAFE element. |