teaPwTDMCurrentIndications OBJECT-TYPE
SYNTAX BITS {
other ( 0),
strayPacket ( 1),
malformedPacket ( 2),
excessivePktLossRate( 3),
bufferOverrun ( 4),
bufferUnderrun ( 5),
remotePktLoss ( 6),
pktMisOrder ( 7),
packetLoss ( 8),
tdmFault ( 9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The following defects should be detected and reported
upon request:
-Stray packets MAY be detected by the PSN and multiplexing
layers. Stray packets MUST be discarded by the CE-bound IWF
and their detection MUST NOT affect mechanisms for detection
of packet loss.
-Malformed packets are detected by mismatch between the
expected packet size (taking the value of the L bit into
account) and the actual packet size inferred from the PSN and
multiplexing layers. Malformed in-order packets MUST be
discarded by the CE-bound IWF and replacement data generated
as for lost packets.
-Excessive packet loss rate is detected by computing the
average packet loss rate over the value of
teaPwTDMAvePktLossTimeWindow and comparing it with a
preconfigured threshold [RFC 4553].
-Buffer overrun is detected in the normal operation state
when the CE bound IWF\s jitter buffer cannot accommodate
newly arrived packets.
-Remote packet loss is indicated by reception of packets with
their R bit set.
-Packet misorder is detected by looking at the Sequence
number provided by the control word.
-TDM Fault, if L bit in the control word is set, it indicates
that TDM data carried in the payload is invalid due an
attachment circuit fault. When the L bit is set the payload
MAY be omitted in order to conserve bandwidth.
Note: the algorithm used to capture these indications
is implementation-specific."
View at oid-info.com
Automatically extracted from module CL-PW-TDM-MIB
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.16.1.1.1.1 | teaPwTDMRate | 0 | 0 | teaPwTDMRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The parameter represents the bit-ra… |
| 1.3.6.1.4.1.4491.2.1.16.1.1.1.2 | teaPwTDMIfIndex | 0 | 0 | teaPwTDMIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This is a unique inde… |
| 1.3.6.1.4.1.4491.2.1.16.1.1.1.3 | teaPwGenTDMCfgIndex | 0 | 0 | teaPwGenTDMCfgIndex OBJECT-TYPE SYNTAX TeaPwTDMCfgIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Index to the generic … |
| 1.3.6.1.4.1.4491.2.1.16.1.1.1.4 | teaPwRelTDMCfgIndex | 0 | 0 | teaPwRelTDMCfgIndex OBJECT-TYPE SYNTAX TeaPwTDMCfgIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Index to the relevan… |
| 1.3.6.1.4.1.4491.2.1.16.1.1.1.5 | teaPwTDMConfigError | 0 | 0 | teaPwTDMConfigError OBJECT-TYPE SYNTAX BITS { other ( 0), tdmTypeIncompatible ( 1), peerRtpIncompatible ( 2), peerPayloadSizeIn… |
| 1.3.6.1.4.1.4491.2.1.16.1.1.1.6 | teaPwTDMTimeElapsed | 0 | 0 | teaPwTDMTimeElapsed OBJECT-TYPE SYNTAX Integer32 (1..900) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of second… |
| 1.3.6.1.4.1.4491.2.1.16.1.1.1.7 | teaPwTDMValidIntervals | 0 | 0 | teaPwTDMValidIntervals OBJECT-TYPE SYNTAX Integer32 (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prev… |
| 1.3.6.1.4.1.4491.2.1.16.1.1.1.9 | teaPwTDMLatchedIndications | 0 | 0 | teaPwTDMLatchedIndications OBJECT-TYPE SYNTAX BITS { other ( 0), staryPacket ( 1), malformedPacket ( 2), excessivePktLossRate( … |
| 1.3.6.1.4.1.4491.2.1.16.1.1.1.10 | teaPwTDMLastEsTimeStamp | 0 | 0 | teaPwTDMLastEsTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at… |
| 1.3.6.1.4.1.4491.2.1.16.1.1.1.11 | teaPwTDMRtpSSRC | 0 | 0 | teaPwTDMRtpSSRC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "In the case where RTP headers … |
| 1.3.6.1.4.1.4491.2.1.16.1.1.1.12 | teaPwTDMPeerRtpSSRC | 0 | 0 | teaPwTDMPeerRtpSSRC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "In the case where RTP head… |