The status of the specified DCC/UCC operation.
The enumerations are:
messageSent(1):
The CMTS has sent change over request message to the
cable modem.
noOpNeed(2):
A operation was requested in which neither the
DS Frequency nor the Upstream Channel ID was changed.
An active value in this entry's row status indicates
that no CMTS operation is required.
modemDeparting(3):
The cable modem has responded with a change over response
of either a DCC-RSP with a confirmation code of depart(180)
or a UCC-RSP.
waitToSendMessage(4):
The specified operation is active and CMTS is waiting
to send the channel change message with channel info to
the cable modem.
cmOperationRejected(5):
Channel Change (such as DCC or UCC) operation was rejected
by the cable modem.
cmtsOperationRejected(6)
Channel Change (such as DCC or UCC) operation was rejected
by the Cable modem Termination System.
timeOutT13(7):
Failure due to no DCC-RSP with confirmation code
depart(180) received prior to expiration of the
T13 timer.
timeOutT15(8):
T15 timer timed out prior to the arrival of a
bandwidth request, RNG-REQ message, or DCC-RSP message
with confirmation code of arrive(181) from the
cable modem.
rejectInit(9):
DCC operation rejected due to unsupported
initialization tech requested.
success(10):
CMTS received an indication that the CM successfully
completed the change over operation.
e.g., If an initialization technique of re-initialize the
MAC is used, success in indicated by the receipt
of a DCC-RSP message with a confirmation code of
depart(180). In all other cases, success is
indicated by:
(1) the CMTS received a DCC-RSP message with
confirmation code of arrive(181)
or
(2) the CMTS internally confirms the presence
of the CM on the new channel.
Parsed from file DOCS-LOADBALANCING-MIB.mib
Module: DOCS-LOADBALANCING-MIB
The status of the specified DCC/UCC operation.
The enumerations are:
messageSent(1):
The CMTS has sent change over request message to the
cable modem.
noOpNeed(2):
A operation was requested in which neither the
DS Frequency nor the Upstream Channel ID was changed.
An active value in this entry's row status indicates
that no CMTS operation is required.
modemDeparting(3):
The cable modem has responded with a change over response
of either a DCC-RSP with a confirmation code of depart(180)
or a UCC-RSP.
waitToSendMessage(4):
The specified operation is active and CMTS is waiting
to send the channel change message with channel info to
the cable modem.
cmOperationRejected(5):
Channel Change (such as DCC or UCC) operation was rejected
by the cable modem.
cmtsOperationRejected(6)
Channel Change (such as DCC or UCC) operation was rejected
by the Cable modem Termination System.
timeOutT13(7):
Failure due to no DCC-RSP with confirmation code
depart(180) received prior to expiration of the
T13 timer.
timeOutT15(8):
T15 timer timed out prior to the arrival of a
bandwidth request, RNG-REQ message, or DCC-RSP message
with confirmation code of arrive(181) from the
cable modem.
rejectInit(9):
DCC operation rejected due to unsupported
initialization tech requested.
success(10):
CMTS received an indication that the CM successfully
completed the change over operation.
e.g., If an initialization technique of re-initialize the
MAC is used, success in indicated by the receipt
of a DCC-RSP message with a confirmation code of
depart(180). In all other cases, success is
indicated by:
(1) the CMTS received a DCC-RSP message with
confirmation code of arrive(181)
or
(2) the CMTS internally confirms the presence
of the CM on the new channel.
The status of the specified DCC/UCC operation.
The enumerations are:
messageSent(1):
The CMTS has sent change over request message to the
cable modem.
noOpNeed(2):
A operation was requested in which neither the
DS Frequency nor the Upstream Channel ID was changed.
An active value in this entry's row status indicates
that no CMTS operation is required.
modemDeparting(3):
The cable modem has responded with a change over response
of either a DCC-RSP with a confirmation code of depart(180)
or a UCC-RSP.
waitToSendMessage(4):
The specified operation is active and CMTS is waiting
to send the channel change message with channel info to
the cable modem.
cmOperationRejected(5):
Channel Change (such as DCC or UCC) operation was rejected
by the cable modem.
cmtsOperationRejected(6)
Channel Change (such as DCC or UCC) operation was rejected
by the Cable modem Termination System.
timeOutT13(7):
Failure due to no DCC-RSP with confirmation code
depart(180) received prior to expiration of the
T13 timer.
timeOutT15(8):
T15 timer timed out prior to the arrival of a
bandwidth request, RNG-REQ message, or DCC-RSP message
with confirmation code of arrive(181) from the
cable modem.
rejectInit(9):
DCC operation rejected due to unsupported
initialization tech requested.
success(10):
CMTS received an indication that the CM successfully
completed the change over operation.
e.g., If an initialization technique of re-initialize the
MAC is used, success in indicated by the receipt
of a DCC-RSP message with a confirmation code of
depart(180). In all other cases, success is
indicated by:
(1) the CMTS received a DCC-RSP message with
confirmation code of arrive(181)
or
(2) the CMTS internally confirms the presence
of the CM on the new channel.
Parsed from file DOCS-LOADBALANCING-MIB.my.txt
Company: None
Module: DOCS-LOADBALANCING-MIB
The status of the specified DCC/UCC operation.
The enumerations are:
messageSent(1):
The CMTS has sent change over request message to the
cable modem.
noOpNeed(2):
A operation was requested in which neither the
DS Frequency nor the Upstream Channel ID was changed.
An active value in this entry's row status indicates
that no CMTS operation is required.
modemDeparting(3):
The cable modem has responded with a change over response
of either a DCC-RSP with a confirmation code of depart(180)
or a UCC-RSP.
waitToSendMessage(4):
The specified operation is active and CMTS is waiting
to send the channel change message with channel info to
the cable modem.
cmOperationRejected(5):
Channel Change (such as DCC or UCC) operation was rejected
by the cable modem.
cmtsOperationRejected(6)
Channel Change (such as DCC or UCC) operation was rejected
by the Cable modem Termination System.
timeOutT13(7):
Failure due to no DCC-RSP with confirmation code
depart(180) received prior to expiration of the
T13 timer.
timeOutT15(8):
T15 timer timed out prior to the arrival of a
bandwidth request, RNG-REQ message, or DCC-RSP message
with confirmation code of arrive(181) from the
cable modem.
rejectInit(9):
DCC operation rejected due to unsupported
initialization tech requested.
success(10):
CMTS received an indication that the CM successfully
completed the change over operation.
e.g., If an initialization technique of re-initialize the
MAC is used, success in indicated by the receipt
of a DCC-RSP message with a confirmation code of
depart(180). In all other cases, success is
indicated by:
(1) the CMTS received a DCC-RSP message with
confirmation code of arrive(181)
or
(2) the CMTS internally confirms the presence
of the CM on the new channel.
docsLoadBalChgOverStatusValue OBJECT-TYPE SYNTAX INTEGER { messageSent(1), noOpNeeded(2), modemDeparting(3), waitToSendMessage(4), cmOperationRejected(5), cmtsOperationRejected(6), timeOutT13(7), timeOutT15(8), rejectinit(9), success(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the specified DCC/UCC operation. The enumerations are: messageSent(1): The CMTS has sent change over request message to the cable modem. noOpNeed(2): A operation was requested in which neither the DS Frequency nor the Upstream Channel ID was changed. An active value in this entry's row status indicates that no CMTS operation is required. modemDeparting(3): The cable modem has responded with a change over response of either a DCC-RSP with a confirmation code of depart(180) or a UCC-RSP. waitToSendMessage(4): The specified operation is active and CMTS is waiting to send the channel change message with channel info to the cable modem. cmOperationRejected(5): Channel Change (such as DCC or UCC) operation was rejected by the cable modem. cmtsOperationRejected(6) Channel Change (such as DCC or UCC) operation was rejected by the Cable modem Termination System. timeOutT13(7): Failure due to no DCC-RSP with confirmation code depart(180) received prior to expiration of the T13 timer. timeOutT15(8): T15 timer timed out prior to the arrival of a bandwidth request, RNG-REQ message, or DCC-RSP message with confirmation code of arrive(181) from the cable modem. rejectInit(9): DCC operation rejected due to unsupported initialization tech requested. success(10): CMTS received an indication that the CM successfully completed the change over operation. e.g., If an initialization technique of re-initialize the MAC is used, success in indicated by the receipt of a DCC-RSP message with a confirmation code of depart(180). In all other cases, success is indicated by: (1) the CMTS received a DCC-RSP message with confirmation code of arrive(181) or (2) the CMTS internally confirms the presence of the CM on the new channel." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification SP-RFIv2.0-I04-030730, Sections C.4.1, 11.4.5.1." DEFVAL { waitToSendMessage } ::= { docsLoadBalChgOverStatusEntry 6 }
docsLoadBalChgOverStatusValue OBJECT-TYPE SYNTAX INTEGER { messageSent(1), noOpNeeded(2), modemDeparting(3), waitToSendMessage(4), cmOperationRejected(5), cmtsOperationRejected(6), timeOutT13(7), timeOutT15(8), rejectinit(9), success(10) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the specified DCC/UCC operation. The enumerations are: messageSent(1): The CMTS has sent change over request message to the cable modem. noOpNeed(2): A operation was requested in which neither the DS Frequency nor the Upstream Channel ID was changed. An active value in this entry's row status indicates that no CMTS operation is required. modemDeparting(3): The cable modem has responded with a change over response of either a DCC-RSP with a confirmation code of depart(180) or a UCC-RSP. waitToSendMessage(4): The specified operation is active and CMTS is waiting to send the channel change message with channel info to the cable modem. cmOperationRejected(5): Channel Change (such as DCC or UCC) operation was rejected by the cable modem. cmtsOperationRejected(6) Channel Change (such as DCC or UCC) operation was rejected by the Cable modem Termination System. timeOutT13(7): Failure due to no DCC-RSP with confirmation code depart(180) received prior to expiration of the T13 timer. timeOutT15(8): T15 timer timed out prior to the arrival of a bandwidth request, RNG-REQ message, or DCC-RSP message with confirmation code of arrive(181) from the cable modem. rejectInit(9): DCC operation rejected due to unsupported initialization tech requested. success(10): CMTS received an indication that the CM successfully completed the change over operation. e.g., If an initialization technique of re-initialize the MAC is used, success in indicated by the receipt of a DCC-RSP message with a confirmation code of depart(180). In all other cases, success is indicated by: (1) the CMTS received a DCC-RSP message with confirmation code of arrive(181) or (2) the CMTS internally confirms the presence of the CM on the new channel." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification SP-RFIv2.0-I04-030730, Sections C.4.1, 11.4.5.1." DEFVAL { waitToSendMessage } ::= { docsLoadBalChgOverStatusEntry 6 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-LOADBALANCING-MIB
[Automatically extracted from oidview.com]
docsLoadBalChgOverStatusValue OBJECT-TYPE SYNTAX INTEGER { messageSent(1), noOpNeeded(2), modemDeparting(3), waitToSendMessage(4), cmOperationRejected(5), cmtsOperationRejected(6), timeOutT13(7), timeOutT15(8), rejectinit(9), success(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the specified DCC/UCC operation. The enumerations are: messageSent(1): The CMTS has sent change over request message to the cable modem. noOpNeed(2): A operation was requested in which neither the DS Frequency nor the Upstream Channel ID was changed. An active value in this entry's row status indicates that no CMTS operation is required. modemDeparting(3): The cable modem has responded with a change over response of either a DCC-RSP with a confirmation code of depart(180) or a UCC-RSP. waitToSendMessage(4): The specified operation is active and CMTS is waiting to send the channel change message with channel info to the cable modem. cmOperationRejected(5): Channel Change (such as DCC or UCC) operation was rejected by the cable modem. cmtsOperationRejected(6) Channel Change (such as DCC or UCC) operation was rejected by the Cable modem Termination System. timeOutT13(7): Failure due to no DCC-RSP with confirmation code depart(180) received prior to expiration of the T13 timer. timeOutT15(8): T15 timer timed out prior to the arrival of a bandwidth request, RNG-REQ message, or DCC-RSP message with confirmation code of arrive(181) from the cable modem. rejectInit(9): DCC operation rejected due to unsupported initialization tech requested. success(10): CMTS received an indication that the CM successfully completed the change over operation. e.g., If an initialization technique of re-initialize the MAC is used, success in indicated by the receipt of a DCC-RSP message with a confirmation code of depart(180). In all other cases, success is indicated by: (1) the CMTS received a DCC-RSP message with confirmation code of arrive(181) or (2) the CMTS internally confirms the presence of the CM on the new channel." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification SP-RFIv2.0-I04-030730, Sections C.4.1, 11.4.5.1." DEFVAL { waitToSendMessage } ::= { docsLoadBalChgOverStatusEntry 6 }
docsLoadBalChgOverStatusValue OBJECT-TYPE SYNTAX INTEGER { messageSent(1), noOpNeeded(2), modemDeparting(3), waitToSendMessage(4), cmOperationRejected(5), cmtsOperationRejected(6), timeOutT13(7), timeOutT15(8), rejectinit(9), success(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the specified DCC/UCC operation. The enumerations are: messageSent(1): The CMTS has sent change over request message to the cable modem. noOpNeed(2): A operation was requested in which neither the DS Frequency nor the Upstream Channel ID was changed. An active value in this entry's row status indicates that no CMTS operation is required. modemDeparting(3): The cable modem has responded with a change over response of either a DCC-RSP with a confirmation code of depart(180) or a UCC-RSP. waitToSendMessage(4): The specified operation is active and CMTS is waiting to send the channel change message with channel info to the cable modem. cmOperationRejected(5): Channel Change (such as DCC or UCC) operation was rejected by the cable modem. cmtsOperationRejected(6) Channel Change (such as DCC or UCC) operation was rejected by the Cable modem Termination System. timeOutT13(7): Failure due to no DCC-RSP with confirmation code depart(180) received prior to expiration of the T13 timer. timeOutT15(8): T15 timer timed out prior to the arrival of a bandwidth request, RNG-REQ message, or DCC-RSP message with confirmation code of arrive(181) from the cable modem. rejectInit(9): DCC operation rejected due to unsupported initialization tech requested. success(10): CMTS received an indication that the CM successfully completed the change over operation. e.g., If an initialization technique of re-initialize the MAC is used, success in indicated by the receipt of a DCC-RSP message with a confirmation code of depart(180). In all other cases, success is indicated by: (1) the CMTS received a DCC-RSP message with confirmation code of arrive(181) or (2) the CMTS internally confirms the presence of the CM on the new channel." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification SP-RFIv2.0-I04-030730, Sections C.4.1, 11.4.5.1." DEFVAL { waitToSendMessage } ::= { docsLoadBalChgOverStatusEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.2.1.2.2.1.1 | docsLoadBalChgOverStatusMacAddr | 0 | 0 | The mac address set in docsLoadBalChgOverMacAddress. |
| 1.3.6.1.4.1.4491.2.1.2.1.2.2.1.2 | docsLoadBalChgOverStatusDownFreq | 0 | 0 | The Downstream frequency set in docsLoadBalChgOverDownFrequency. |
| 1.3.6.1.4.1.4491.2.1.2.1.2.2.1.3 | docsLoadBalChgOverStatusUpChnId | 0 | 0 | The upstream channel ID set in docsLoadBalChgOverUpChannelId. |
| 1.3.6.1.4.1.4491.2.1.2.1.2.2.1.4 | docsLoadBalChgOverStatusInitTech | 0 | 0 | The initialization technique set in docsLoadBalChgOverInitTech. |
| 1.3.6.1.4.1.4491.2.1.2.1.2.2.1.5 | docsLoadBalChgOverStatusCmd | 0 | 0 | The load balancing command set in docsLoadBalChgOverCmd. |
| 1.3.6.1.4.1.4491.2.1.2.1.2.2.1.7 | docsLoadBalChgOverStatusUpdate | 0 | 0 | The value of sysUpTime when docsLoadBalChgOverStatusValue was last updated. |