Reference record for OID 1.3.6.1.4.1.4491.2.1.22.1.1.1

parent

1.3.6.1.4.1.4491.2.1.22.1.1 (docsLoadbal3System)

node code

1

node name

docsLoadbal3SystemEnable

dot oid

1.3.6.1.4.1.4491.2.1.22.1.1.1

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsLoadbal3Mib(22) docsLoadbal3MibObjects(1) docsLoadbal3System(1) docsLoadbal3SystemEnable(1)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsLoadbal3Mib(22) docsLoadbal3MibObjects(1) docsLoadbal3System(1) docsLoadbal3SystemEnable(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsLoadbal3Mib(22) docsLoadbal3MibObjects(1) docsLoadbal3System(1) docsLoadbal3SystemEnable(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsLoadbal3Mib(22) docsLoadbal3MibObjects(1) docsLoadbal3System(1) docsLoadbal3SystemEnable(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsLoadbal3Mib(22) docsLoadbal3MibObjects(1) docsLoadbal3System(1) docsLoadbal3SystemEnable(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsLoadbal3Mib(22) docsLoadbal3MibObjects(1) docsLoadbal3System(1) docsLoadbal3SystemEnable(1)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsLoadbal3Mib/docsLoadbal3MibObjects/docsLoadbal3System/docsLoadbal3SystemEnable

/iso/identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsLoadbal3Mib/docsLoadbal3MibObjects/docsLoadbal3System/docsLoadbal3SystemEnable

/iso/org/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsLoadbal3Mib/docsLoadbal3MibObjects/docsLoadbal3System/docsLoadbal3SystemEnable

/iso/org/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsLoadbal3Mib/docsLoadbal3MibObjects/docsLoadbal3System/docsLoadbal3SystemEnable

/iso/iso-identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsLoadbal3Mib/docsLoadbal3MibObjects/docsLoadbal3System/docsLoadbal3SystemEnable

/iso/iso-identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsLoadbal3Mib/docsLoadbal3MibObjects/docsLoadbal3System/docsLoadbal3SystemEnable

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/4491/2/1/22/1/1/1

Description by circitor

This attribute when set to 'true' enables Autonomous
Load Balancing operation on the CMTS, otherwise
Autonomous Load Balancing is disabled. A failure to
enable Autonomous Load Balancing operation is registered
in the EnableError attribute.
When Autonomous Load Balancing is enabled, the CMTS
may reject Externally-Directed Load Balancing operations.
However, even when Autonomous Load Balancing
is disabled, the CMTS is required to assign load balancing
parameters to CMs as provisioned in the configuration
file and/or RestrictCM object.
This attribute value persists after system reinitialization.
There might be cases where this attribute
reports a failure and Load Balancing is enabled, for
example after system reinitialization where Load
Balancing was previously set to enabled but there are
issues with the CMTS configuration.

Parsed from file DOCS-LOADBAL3-MIB.mib
Module: DOCS-LOADBAL3-MIB

Description by cisco_v1

This attribute when set to 'true' enables Autonomous
Load Balancing operation on the CMTS, otherwise
Autonomous Load Balancing is disabled. A failure to
enable Autonomous Load Balancing operation is registered
in the EnableError attribute.
When Autonomous Load Balancing is enabled, the CMTS
may reject Externally-Directed Load Balancing operations.
However, even when Autonomous Load Balancing
is disabled, the CMTS is required to assign load balancing
parameters to CMs as provisioned in the configuration
file and/or RestrictCM object.
This attribute value persists after system reinitialization.
There might be cases where this attribute
reports a failure and Load Balancing is enabled, for
example after system reinitialization where Load
Balancing was previously set to enabled but there are
issues with the CMTS configuration.

Description by mibdepot

This attribute when set to 'true' enables Autonomous
Load Balancing operation on the CMTS, otherwise
Autonomous Load Balancing is disabled. A failure to
enable Autonomous Load Balancing operation is registered
in the EnableError attribute.
When Autonomous Load Balancing is enabled, the CMTS
may reject Externally-Directed Load Balancing operations.
However, even when Autonomous Load Balancing
is disabled, the CMTS is required to assign load balancing
parameters to CMs as provisioned in the configuration
file and/or RestrictCM object.
This attribute value persists after system reinitialization.
There might be cases where this attribute
reports a failure and Load Balancing is enabled, for
example after system reinitialization where Load
Balancing was previously set to enabled but there are
issues with the CMTS configuration.

Parsed from file DOCS-LOADBAL3-MIB.my.txt
Company: None
Module: DOCS-LOADBAL3-MIB

Description by cisco

This attribute when set to 'true' enables Autonomous
Load Balancing operation on the CMTS, otherwise
Autonomous Load Balancing is disabled. A failure to
enable Autonomous Load Balancing operation is registered
in the EnableError attribute.
When Autonomous Load Balancing is enabled, the CMTS
may reject Externally-Directed Load Balancing operations.
However, even when Autonomous Load Balancing
is disabled, the CMTS is required to assign load balancing
parameters to CMs as provisioned in the configuration
file and/or RestrictCM object.
This attribute value persists after system reinitialization.
There might be cases where this attribute
reports a failure and Load Balancing is enabled, for
example after system reinitialization where Load
Balancing was previously set to enabled but there are
issues with the CMTS configuration.

Information by circitor

docsLoadbal3SystemEnable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This attribute when set to 'true' enables Autonomous
        Load Balancing operation on the CMTS, otherwise
        Autonomous Load Balancing is disabled. A failure to
        enable Autonomous Load Balancing operation is registered
        in the EnableError attribute.
        When Autonomous Load Balancing is enabled, the CMTS
        may reject Externally-Directed Load Balancing operations.
        However, even when Autonomous Load Balancing
        is disabled, the CMTS is required to assign load balancing
        parameters to CMs as provisioned in the configuration
        file and/or RestrictCM object. 
        This attribute value persists after system reinitialization.
        There might be cases where this attribute
        reports a failure and Load Balancing is enabled, for
        example after system reinitialization where Load
        Balancing was previously set to enabled but there are
        issues with the CMTS configuration."
    REFERENCE
        "DOCSIS 3.0 Operations Support System Interface
        Specification CM-SP-OSSIv3.0-I07-080522 Externally-Directed
        Load Balancing section."
    DEFVAL          { true } 
    ::= { docsLoadbal3System 1 }

Information by cisco_v1

docsLoadbal3SystemEnable OBJECT-TYPE
    SYNTAX TruthValue




    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This attribute when set to 'true' enables Autonomous
        Load Balancing operation on the CMTS, otherwise
        Autonomous Load Balancing is disabled. A failure to
        enable Autonomous Load Balancing operation is registered
        in the EnableError attribute.
        When Autonomous Load Balancing is enabled, the CMTS
        may reject Externally-Directed Load Balancing operations.
        However, even when Autonomous Load Balancing
        is disabled, the CMTS is required to assign load balancing
        parameters to CMs as provisioned in the configuration
        file and/or RestrictCM object. 
        This attribute value persists after system reinitialization.
        There might be cases where this attribute
        reports a failure and Load Balancing is enabled, for
        example after system reinitialization where Load
        Balancing was previously set to enabled but there are
        issues with the CMTS configuration."
    REFERENCE
        "DOCSIS 3.0 Operations Support System Interface
        Specification CM-SP-OSSIv3.0-I07-080522 Externally-Directed
        Load Balancing section."
    DEFVAL { true }
    ::= { docsLoadbal3System 1 }

Information by oid_info

Vendor: Cable Television Laboratories, Inc.
Module: DOCS-LOADBAL3-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

docsLoadbal3SystemEnable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This attribute when set to 'true' enables Autonomous
        Load Balancing operation on the CMTS, otherwise
        Autonomous Load Balancing is disabled. A failure to
        enable Autonomous Load Balancing operation is registered
        in the EnableError attribute.
        When Autonomous Load Balancing is enabled, the CMTS
        may reject Externally-Directed Load Balancing operations.
        However, even when Autonomous Load Balancing
        is disabled, the CMTS is required to assign load balancing
        parameters to CMs as provisioned in the configuration
        file and/or RestrictCM object. 
        This attribute value persists after system reinitialization.
        There might be cases where this attribute
        reports a failure and Load Balancing is enabled, for
        example after system reinitialization where Load
        Balancing was previously set to enabled but there are
        issues with the CMTS configuration."
    REFERENCE
        "DOCSIS 3.0 Operations Support System Interface
        Specification CM-SP-OSSIv3.0-I07-080522 Externally-Directed
        Load Balancing section."
    DEFVAL          { true } 
    ::= { docsLoadbal3System 1 }

Information by cisco

docsLoadbal3SystemEnable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This attribute when set to 'true' enables Autonomous
        Load Balancing operation on the CMTS, otherwise
        Autonomous Load Balancing is disabled. A failure to
        enable Autonomous Load Balancing operation is registered
        in the EnableError attribute.
        When Autonomous Load Balancing is enabled, the CMTS
        may reject Externally-Directed Load Balancing operations.
        However, even when Autonomous Load Balancing
        is disabled, the CMTS is required to assign load balancing
        parameters to CMs as provisioned in the configuration
        file and/or RestrictCM object. 
        This attribute value persists after system reinitialization.
        There might be cases where this attribute
        reports a failure and Load Balancing is enabled, for
        example after system reinitialization where Load
        Balancing was previously set to enabled but there are
        issues with the CMTS configuration."
    REFERENCE
        "DOCSIS 3.0 Operations Support System Interface
        Specification CM-SP-OSSIv3.0-I07-080522 Externally-Directed
        Load Balancing section."
    DEFVAL          { true } 
    ::= { docsLoadbal3System 1 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

Ralph Brown

Current Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

Maria Stachelek

Children (1)

Brothers (1)