This attribute represents the status of the specified
change-over operation. The enumerations are:
Change-over using DCC message exchange:
'modemDeparting'
The cable modem has responded with a change-over response
of either a DCC-RSP with a confirmation code of
depart(180) or a UCC-RSP.
'timeOutT13'
Failure due to no DCC-RSP with confirmation code depart(180)
received prior to expiration of the T13 timer.
'timeOutT15'
T15 timer timed out prior to the arrival of a bandwidth
request, RNG-REQ message, or DCC-RSP message with
confirmation code of arrive(181) from the cable modem.
Change-over using DBC message exchange:
'dbcTimeout'
The number of DBC-REQ retries was exceeded and no DBC-RSP
was received
Change-over CMTS verifications:
'messageSent'
The CMTS has sent a DOCSIS MAC message request to instruct
the CM to do the change-over operation.
'noOpNeed'
A change-over operation was requested in which neither
the DS and US channels where the CM is operational
changed.
'waitToSendMessage'
The specified operation is active and CMTS is waiting
to send the channel change message with channel info
to the cable modem.
'cmOperationRejected'
Channel Change operation was rejected by the cable modem.
'cmtsOperationRejected'
Channel Change operation was rejected by the Cable Modem
Termination System.
'rejectInit'
Operation rejected due to unsupported initialization
tech requested.
'success'
CMTS received an indication that the CM successfully
completed the change-over operation. e.g., If an initialization
technique of re-initialize the MAC is
used, success in indicated by the receipt of a DCC-RSP
message with a confirmation code of depart(180) or
DBC confirmation code ok/success. In all other DCC
cases, success is indicated by: (1) the CMTS received
a DCC-RSP message with confirmation code of arrive(181)
or (2) the CMTS internally confirms the presence
of the CM on the new channel(s).
Parsed from file DOCS-LOADBAL3-MIB.mib
Module: DOCS-LOADBAL3-MIB
This attribute represents the status of the specified
change-over operation. The enumerations are:
Change-over using DCC message exchange:
'modemDeparting'
The cable modem has responded with a change-over response
of either a DCC-RSP with a confirmation code of
depart(180) or a UCC-RSP.
'timeOutT13'
Failure due to no DCC-RSP with confirmation code depart(180)
received prior to expiration of the T13 timer.
'timeOutT15'
T15 timer timed out prior to the arrival of a bandwidth
request, RNG-REQ message, or DCC-RSP message with
confirmation code of arrive(181) from the cable modem.
Change-over using DBC message exchange:
'dbcTimeout'
The number of DBC-REQ retries was exceeded and no DBC-RSP
was received
Change-over CMTS verifications:
'messageSent'
The CMTS has sent a DOCSIS MAC message request to instruct
the CM to do the change-over operation.
'noOpNeed'
A change-over operation was requested in which neither
the DS and US channels where the CM is operational
changed.
'waitToSendMessage'
The specified operation is active and CMTS is waiting
to send the channel change message with channel info
to the cable modem.
'cmOperationRejected'
Channel Change operation was rejected by the cable modem.
'cmtsOperationRejected'
Channel Change operation was rejected by the Cable Modem
Termination System.
'rejectInit'
Operation rejected due to unsupported initialization
tech requested.
'success'
CMTS received an indication that the CM successfully
completed the change-over operation. e.g., If an initialization
technique of re-initialize the MAC is
used, success in indicated by the receipt of a DCC-RSP
message with a confirmation code of depart(180) or
DBC confirmation code ok/success. In all other DCC
cases, success is indicated by: (1) the CMTS received
a DCC-RSP message with confirmation code of arrive(181)
or (2) the CMTS internally confirms the presence
of the CM on the new channel(s).
This attribute represents the status of the specified
change-over operation. The enumerations are:
Change-over using DCC message exchange:
'modemDeparting'
The cable modem has responded with a change-over response
of either a DCC-RSP with a confirmation code of
depart(180) or a UCC-RSP.
'timeOutT13'
Failure due to no DCC-RSP with confirmation code depart(180)
received prior to expiration of the T13 timer.
'timeOutT15'
T15 timer timed out prior to the arrival of a bandwidth
request, RNG-REQ message, or DCC-RSP message with
confirmation code of arrive(181) from the cable modem.
Change-over using DBC message exchange:
'dbcTimeout'
The number of DBC-REQ retries was exceeded and no DBC-RSP
was received
Change-over CMTS verifications:
'messageSent'
The CMTS has sent a DOCSIS MAC message request to instruct
the CM to do the change-over operation.
'noOpNeed'
A change-over operation was requested in which neither
the DS and US channels where the CM is operational
changed.
'waitToSendMessage'
The specified operation is active and CMTS is waiting
to send the channel change message with channel info
to the cable modem.
'cmOperationRejected'
Channel Change operation was rejected by the cable modem.
'cmtsOperationRejected'
Channel Change operation was rejected by the Cable Modem
Termination System.
'rejectInit'
Operation rejected due to unsupported initialization
tech requested.
'success'
CMTS received an indication that the CM successfully
completed the change-over operation. e.g., If an initialization
technique of re-initialize the MAC is
used, success in indicated by the receipt of a DCC-RSP
message with a confirmation code of depart(180) or
DBC confirmation code ok/success. In all other DCC
cases, success is indicated by: (1) the CMTS received
a DCC-RSP message with confirmation code of arrive(181)
or (2) the CMTS internally confirms the presence
of the CM on the new channel(s).
Parsed from file DOCS-LOADBAL3-MIB.my.txt
Company: None
Module: DOCS-LOADBAL3-MIB
This attribute represents the status of the specified
change-over operation. The enumerations are:
Change-over using DCC message exchange:
'modemDeparting'
The cable modem has responded with a change-over response
of either a DCC-RSP with a confirmation code of
depart(180) or a UCC-RSP.
'timeOutT13'
Failure due to no DCC-RSP with confirmation code depart(180)
received prior to expiration of the T13 timer.
'timeOutT15'
T15 timer timed out prior to the arrival of a bandwidth
request, RNG-REQ message, or DCC-RSP message with
confirmation code of arrive(181) from the cable modem.
Change-over using DBC message exchange:
'dbcTimeout'
The number of DBC-REQ retries was exceeded and no DBC-RSP
was received
Change-over CMTS verifications:
'messageSent'
The CMTS has sent a DOCSIS MAC message request to instruct
the CM to do the change-over operation.
'noOpNeed'
A change-over operation was requested in which neither
the DS and US channels where the CM is operational
changed.
'waitToSendMessage'
The specified operation is active and CMTS is waiting
to send the channel change message with channel info
to the cable modem.
'cmOperationRejected'
Channel Change operation was rejected by the cable modem.
'cmtsOperationRejected'
Channel Change operation was rejected by the Cable Modem
Termination System.
'rejectInit'
Operation rejected due to unsupported initialization
tech requested.
'success'
CMTS received an indication that the CM successfully
completed the change-over operation. e.g., If an initialization
technique of re-initialize the MAC is
used, success in indicated by the receipt of a DCC-RSP
message with a confirmation code of depart(180) or
DBC confirmation code ok/success. In all other DCC
cases, success is indicated by: (1) the CMTS received
a DCC-RSP message with confirmation code of arrive(181)
or (2) the CMTS internally confirms the presence
of the CM on the new channel(s).
docsLoadbal3ChgOverStatusValue OBJECT-TYPE SYNTAX INTEGER { messageSent(1), noOpNeeded(2), modemDeparting(3), waitToSendMessage(4), cmOperationRejected(5), cmtsOperationRejected(6), timeOutT13(7), timeOutT15(8), rejectinit(9), success(10), dbcTimeout(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the status of the specified change-over operation. The enumerations are: Change-over using DCC message exchange: 'modemDeparting' The cable modem has responded with a change-over response of either a DCC-RSP with a confirmation code of depart(180) or a UCC-RSP. 'timeOutT13' Failure due to no DCC-RSP with confirmation code depart(180) received prior to expiration of the T13 timer. 'timeOutT15' T15 timer timed out prior to the arrival of a bandwidth request, RNG-REQ message, or DCC-RSP message with confirmation code of arrive(181) from the cable modem. Change-over using DBC message exchange: 'dbcTimeout' The number of DBC-REQ retries was exceeded and no DBC-RSP was received Change-over CMTS verifications: 'messageSent' The CMTS has sent a DOCSIS MAC message request to instruct the CM to do the change-over operation. 'noOpNeed' A change-over operation was requested in which neither the DS and US channels where the CM is operational changed. 'waitToSendMessage' The specified operation is active and CMTS is waiting to send the channel change message with channel info to the cable modem. 'cmOperationRejected' Channel Change operation was rejected by the cable modem. 'cmtsOperationRejected' Channel Change operation was rejected by the Cable Modem Termination System. 'rejectInit' Operation rejected due to unsupported initialization tech requested. 'success' CMTS received an indication that the CM successfully completed the change-over operation. e.g., If an initialization technique of re-initialize the MAC is used, success in indicated by the receipt of a DCC-RSP message with a confirmation code of depart(180) or DBC confirmation code ok/success. In all other DCC cases, success is indicated by: (1) the CMTS received a DCC-RSP message with confirmation code of arrive(181) or (2) the CMTS internally confirms the presence of the CM on the new channel(s)." ::= { docsLoadbal3ChgOverStatusEntry 12 }
docsLoadbal3ChgOverStatusValue OBJECT-TYPE SYNTAX INTEGER { messageSent(1), noOpNeeded(2), modemDeparting(3), waitToSendMessage(4), cmOperationRejected(5), cmtsOperationRejected(6), timeOutT13(7), timeOutT15(8), rejectinit(9), success(10), dbcTimeout(11) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the status of the specified change-over operation. The enumerations are: Change-over using DCC message exchange: 'modemDeparting' The cable modem has responded with a change-over response of either a DCC-RSP with a confirmation code of depart(180) or a UCC-RSP. 'timeOutT13' Failure due to no DCC-RSP with confirmation code depart(180) received prior to expiration of the T13 timer. 'timeOutT15' T15 timer timed out prior to the arrival of a bandwidth request, RNG-REQ message, or DCC-RSP message with confirmation code of arrive(181) from the cable modem. Change-over using DBC message exchange: 'dbcTimeout' The number of DBC-REQ retries was exceeded and no DBC-RSP was received Change-over CMTS verifications: 'messageSent' The CMTS has sent a DOCSIS MAC message request to instruct the CM to do the change-over operation. 'noOpNeed' A change-over operation was requested in which neither the DS and US channels where the CM is operational changed. 'waitToSendMessage' The specified operation is active and CMTS is waiting to send the channel change message with channel info to the cable modem. 'cmOperationRejected' Channel Change operation was rejected by the cable modem. 'cmtsOperationRejected' Channel Change operation was rejected by the Cable Modem Termination System. 'rejectInit' Operation rejected due to unsupported initialization tech requested. 'success' CMTS received an indication that the CM successfully completed the change-over operation. e.g., If an initialization technique of re-initialize the MAC is used, success in indicated by the receipt of a DCC-RSP message with a confirmation code of depart(180) or DBC confirmation code ok/success. In all other DCC cases, success is indicated by: (1) the CMTS received a DCC-RSP message with confirmation code of arrive(181) or (2) the CMTS internally confirms the presence of the CM on the new channel(s)." ::= { docsLoadbal3ChgOverStatusEntry 12 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-LOADBAL3-MIB
[Automatically extracted from oidview.com]
docsLoadbal3ChgOverStatusValue OBJECT-TYPE SYNTAX INTEGER { messageSent(1), noOpNeeded(2), modemDeparting(3), waitToSendMessage(4), cmOperationRejected(5), cmtsOperationRejected(6), timeOutT13(7), timeOutT15(8), rejectinit(9), success(10), dbcTimeout(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the status of the specified change-over operation. The enumerations are: Change-over using DCC message exchange: 'modemDeparting' The cable modem has responded with a change-over response of either a DCC-RSP with a confirmation code of depart(180) or a UCC-RSP. 'timeOutT13' Failure due to no DCC-RSP with confirmation code depart(180) received prior to expiration of the T13 timer. 'timeOutT15' T15 timer timed out prior to the arrival of a bandwidth request, RNG-REQ message, or DCC-RSP message with confirmation code of arrive(181) from the cable modem. Change-over using DBC message exchange: 'dbcTimeout' The number of DBC-REQ retries was exceeded and no DBC-RSP was received Change-over CMTS verifications: 'messageSent' The CMTS has sent a DOCSIS MAC message request to instruct the CM to do the change-over operation. 'noOpNeed' A change-over operation was requested in which neither the DS and US channels where the CM is operational changed. 'waitToSendMessage' The specified operation is active and CMTS is waiting to send the channel change message with channel info to the cable modem. 'cmOperationRejected' Channel Change operation was rejected by the cable modem. 'cmtsOperationRejected' Channel Change operation was rejected by the Cable Modem Termination System. 'rejectInit' Operation rejected due to unsupported initialization tech requested. 'success' CMTS received an indication that the CM successfully completed the change-over operation. e.g., If an initialization technique of re-initialize the MAC is used, success in indicated by the receipt of a DCC-RSP message with a confirmation code of depart(180) or DBC confirmation code ok/success. In all other DCC cases, success is indicated by: (1) the CMTS received a DCC-RSP message with confirmation code of arrive(181) or (2) the CMTS internally confirms the presence of the CM on the new channel(s)." ::= { docsLoadbal3ChgOverStatusEntry 12 }
docsLoadbal3ChgOverStatusValue OBJECT-TYPE SYNTAX INTEGER { messageSent(1), noOpNeeded(2), modemDeparting(3), waitToSendMessage(4), cmOperationRejected(5), cmtsOperationRejected(6), timeOutT13(7), timeOutT15(8), rejectinit(9), success(10), dbcTimeout(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the status of the specified change-over operation. The enumerations are: Change-over using DCC message exchange: 'modemDeparting' The cable modem has responded with a change-over response of either a DCC-RSP with a confirmation code of depart(180) or a UCC-RSP. 'timeOutT13' Failure due to no DCC-RSP with confirmation code depart(180) received prior to expiration of the T13 timer. 'timeOutT15' T15 timer timed out prior to the arrival of a bandwidth request, RNG-REQ message, or DCC-RSP message with confirmation code of arrive(181) from the cable modem. Change-over using DBC message exchange: 'dbcTimeout' The number of DBC-REQ retries was exceeded and no DBC-RSP was received Change-over CMTS verifications: 'messageSent' The CMTS has sent a DOCSIS MAC message request to instruct the CM to do the change-over operation. 'noOpNeed' A change-over operation was requested in which neither the DS and US channels where the CM is operational changed. 'waitToSendMessage' The specified operation is active and CMTS is waiting to send the channel change message with channel info to the cable modem. 'cmOperationRejected' Channel Change operation was rejected by the cable modem. 'cmtsOperationRejected' Channel Change operation was rejected by the Cable Modem Termination System. 'rejectInit' Operation rejected due to unsupported initialization tech requested. 'success' CMTS received an indication that the CM successfully completed the change-over operation. e.g., If an initialization technique of re-initialize the MAC is used, success in indicated by the receipt of a DCC-RSP message with a confirmation code of depart(180) or DBC confirmation code ok/success. In all other DCC cases, success is indicated by: (1) the CMTS received a DCC-RSP message with confirmation code of arrive(181) or (2) the CMTS internally confirms the presence of the CM on the new channel(s)." ::= { docsLoadbal3ChgOverStatusEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.1 | docsLoadbal3ChgOverStatusId | 0 | 0 | This key represents a monotonically increasing value for the record that stores the status of the change-over operation. When th… |
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.2 | docsLoadbal3ChgOverStatusMacAddr | 0 | 0 | This attribute represents the Mac address set in the ChgOver object commit operation. |
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.3 | docsLoadbal3ChgOverStatusInitTech | 0 | 0 | The initialization technique set in change-over operation. |
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.4 | docsLoadbal3ChgOverStatusDownFrequency | 0 | 0 | This attribute represents the new downstream frequency to which the cable modem is instructed to move. The value 0 indicates that… |
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.5 | docsLoadbal3ChgOverStatusMdIfIndex | 0 | 0 | This attribute represents the MAC Domain Interface index set in the ChgOver3 object commit operation, or zero. |
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.6 | docsLoadbal3ChgOverStatusRcpId | 0 | 0 | This attribute represents the RCP-ID set in the MultipleChChgOver object commit operation, or all zeros RCP-ID. |
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.7 | docsLoadbal3ChgOverStatusRccId | 0 | 0 | This attribute represents the RCC Status Index set in the ChgOver3 object commit operation, or zero. |
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.8 | docsLoadbal3ChgOverStatusUsChSet | 0 | 0 | This attribute represents the Upstream Channel Set ID in the ChgOver3 object commit operation, or zero. |
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.9 | docsLoadbal3ChgOverStatusServiceFlowInfo | 0 | 0 | This attribute represents the list of Service Flow-Channel Set ID pairs set in the ChgOver object commit operation, or zero-lengt… |
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.10 | docsLoadbal3ChgOverStatusCmd | 0 | 0 | The load balancing MAC Management Message exchange type used by the CMTS for the change-over operation in the ChgOver object comm… |
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.11 | docsLoadbal3ChgOverStatusTransactionId | 0 | 0 | This attribute represents the transaction Id value used in the change-over operation. |
| 1.3.6.1.4.1.4491.2.1.22.1.3.1.13 | docsLoadbal3ChgOverStatusUpdate | 0 | 0 | The value of sysUpTime when the attribute value of this instance was last updated. |