This object represents the autonomous load balancing
parameters provisioned for cable modem. The CMTS
selects the cable modem Load Balancing Group (GrpId
attribute of this object) from multiple sources by
following the rules and sequence described below:
The CMTS selects the assignment of the CM to a Load Balancing
Group by determining first if the CM is in a Restricted
Load Balancing Group or in its absence to the General
Load Balancing group that corresponds to the
MD-CM-SG of the CM. The selection of the Restricted Load
Balancing group is achieved by first matching the
CM in the RestrictCmCfg Object and if no match is found,
by selecting the best match within the ResGrpCfg
object.
The best match within the ResGrpCfg follows the MULPI
requirements on precedences of the CM signaled TLVs:
ServiceType ID and Load Balancing Group ID (for backward
compatibility of provisioned Group IDs).
Parsed from file DOCS-LOADBAL3-MIB.mib
Module: DOCS-LOADBAL3-MIB
This object represents the autonomous load balancing
parameters provisioned for cable modem. The CMTS
selects the cable modem Load Balancing Group (GrpId
attribute of this object) from multiple sources by
following the rules and sequence described below:
The CMTS selects the assignment of the CM to a Load Balancing
Group by determining first if the CM is in a Restricted
Load Balancing Group or in its absence to the General
Load Balancing group that corresponds to the
MD-CM-SG of the CM. The selection of the Restricted Load
Balancing group is achieved by first matching the
CM in the RestrictCmCfg Object and if no match is found,
by selecting the best match within the ResGrpCfg
object.
The best match within the ResGrpCfg follows the MULPI
requirements on precedences of the CM signaled TLVs:
ServiceType ID and Load Balancing Group ID (for backward
compatibility of provisioned Group IDs).
This object represents the autonomous load balancing
parameters provisioned for cable modem. The CMTS
selects the cable modem Load Balancing Group (GrpId
attribute of this object) from multiple sources by
following the rules and sequence described below:
The CMTS selects the assignment of the CM to a Load Balancing
Group by determining first if the CM is in a Restricted
Load Balancing Group or in its absence to the General
Load Balancing group that corresponds to the
MD-CM-SG of the CM. The selection of the Restricted Load
Balancing group is achieved by first matching the
CM in the RestrictCmCfg Object and if no match is found,
by selecting the best match within the ResGrpCfg
object.
The best match within the ResGrpCfg follows the MULPI
requirements on precedences of the CM signaled TLVs:
ServiceType ID and Load Balancing Group ID (for backward
compatibility of provisioned Group IDs).
Parsed from file DOCS-LOADBAL3-MIB.my.txt
Company: None
Module: DOCS-LOADBAL3-MIB
This object represents the autonomous load balancing
parameters provisioned for cable modem. The CMTS
selects the cable modem Load Balancing Group (GrpId
attribute of this object) from multiple sources by
following the rules and sequence described below:
The CMTS selects the assignment of the CM to a Load Balancing
Group by determining first if the CM is in a Restricted
Load Balancing Group or in its absence to the General
Load Balancing group that corresponds to the
MD-CM-SG of the CM. The selection of the Restricted Load
Balancing group is achieved by first matching the
CM in the RestrictCmCfg Object and if no match is found,
by selecting the best match within the ResGrpCfg
object.
The best match within the ResGrpCfg follows the MULPI
requirements on precedences of the CM signaled TLVs:
ServiceType ID and Load Balancing Group ID (for backward
compatibility of provisioned Group IDs).
docsLoadbal3CmtsCmParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3CmtsCmParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the autonomous load balancing parameters provisioned for cable modem. The CMTS selects the cable modem Load Balancing Group (GrpId attribute of this object) from multiple sources by following the rules and sequence described below: The CMTS selects the assignment of the CM to a Load Balancing Group by determining first if the CM is in a Restricted Load Balancing Group or in its absence to the General Load Balancing group that corresponds to the MD-CM-SG of the CM. The selection of the Restricted Load Balancing group is achieved by first matching the CM in the RestrictCmCfg Object and if no match is found, by selecting the best match within the ResGrpCfg object. The best match within the ResGrpCfg follows the MULPI requirements on precedences of the CM signaled TLVs: ServiceType ID and Load Balancing Group ID (for backward compatibility of provisioned Group IDs)." REFERENCE "DOCSIS 3.0 MAC and Uper Layer Protocol Specification, CM-SP-MULPIv3.0-I08-080522, Channel Assignment During Registration section." ::= { docsLoadbal3MibObjects 4 }
docsLoadbal3CmtsCmParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3CmtsCmParamsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object represents the autonomous load balancing parameters provisioned for cable modem. The CMTS selects the cable modem Load Balancing Group (GrpId attribute of this object) from multiple sources by following the rules and sequence described below: The CMTS selects the assignment of the CM to a Load Balancing Group by determining first if the CM is in a Restricted Load Balancing Group or in its absence to the General Load Balancing group that corresponds to the MD-CM-SG of the CM. The selection of the Restricted Load Balancing group is achieved by first matching the CM in the RestrictCmCfg Object and if no match is found, by selecting the best match within the ResGrpCfg object. The best match within the ResGrpCfg follows the MULPI requirements on precedences of the CM signaled TLVs: ServiceType ID and Load Balancing Group ID (for backward compatibility of provisioned Group IDs)." REFERENCE "DOCSIS 3.0 MAC and Uper Layer Protocol Specification, CM-SP-MULPIv3.0-I08-080522, Channel Assignment During Registration section." ::= { docsLoadbal3MibObjects 4 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-LOADBAL3-MIB
[Automatically extracted from oidview.com]
docsLoadbal3CmtsCmParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3CmtsCmParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the autonomous load balancing parameters provisioned for cable modem. The CMTS selects the cable modem Load Balancing Group (GrpId attribute of this object) from multiple sources by following the rules and sequence described below: The CMTS selects the assignment of the CM to a Load Balancing Group by determining first if the CM is in a Restricted Load Balancing Group or in its absence to the General Load Balancing group that corresponds to the MD-CM-SG of the CM. The selection of the Restricted Load Balancing group is achieved by first matching the CM in the RestrictCmCfg Object and if no match is found, by selecting the best match within the ResGrpCfg object. The best match within the ResGrpCfg follows the MULPI requirements on precedences of the CM signaled TLVs: ServiceType ID and Load Balancing Group ID (for backward compatibility of provisioned Group IDs)." REFERENCE "DOCSIS 3.0 MAC and Uper Layer Protocol Specification, CM-SP-MULPIv3.0-I08-080522, Channel Assignment During Registration section." ::= { docsLoadbal3MibObjects 4 }
docsLoadbal3CmtsCmParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsLoadbal3CmtsCmParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the autonomous load balancing parameters provisioned for cable modem. The CMTS selects the cable modem Load Balancing Group (GrpId attribute of this object) from multiple sources by following the rules and sequence described below: The CMTS selects the assignment of the CM to a Load Balancing Group by determining first if the CM is in a Restricted Load Balancing Group or in its absence to the General Load Balancing group that corresponds to the MD-CM-SG of the CM. The selection of the Restricted Load Balancing group is achieved by first matching the CM in the RestrictCmCfg Object and if no match is found, by selecting the best match within the ResGrpCfg object. The best match within the ResGrpCfg follows the MULPI requirements on precedences of the CM signaled TLVs: ServiceType ID and Load Balancing Group ID (for backward compatibility of provisioned Group IDs)." REFERENCE "DOCSIS 3.0 MAC and Uper Layer Protocol Specification, CM-SP-MULPIv3.0-I08-080522, Channel Assignment During Registration section." ::= { docsLoadbal3MibObjects 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.22.1.4.1 | docsLoadbal3CmtsCmParamsEntry | 6 | 6 | The conceptual row of docsLoadbal3CmtsCmParams. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.22.1.1 | docsLoadbal3System | 2 | 4 | None |
| 1.3.6.1.4.1.4491.2.1.22.1.2 | docsLoadbal3ChgOverGroup | 12 | 24 | None |
| 1.3.6.1.4.1.4491.2.1.22.1.3 | docsLoadbal3ChgOverStatusTable | 1 | 14 | This object reports the status of cable modems instructed to move to a new downstream and/or upstream channel or channel sets whe… |
| 1.3.6.1.4.1.4491.2.1.22.1.5 | docsLoadbal3GeneralGrpDefaults | 3 | 6 | None |
| 1.3.6.1.4.1.4491.2.1.22.1.6 | docsLoadbal3GeneralGrpCfgTable | 1 | 6 | This object provides the parameters for the General Load Balancing Groups of MD-CM-SGs associated with MAC Domain-Fiber Node pair… |
| 1.3.6.1.4.1.4491.2.1.22.1.7 | docsLoadbal3ResGrpCfgTable | 1 | 10 | This object represents the configuration of Restricted Load Balancing Groups. |
| 1.3.6.1.4.1.4491.2.1.22.1.8 | docsLoadbal3GrpStatusTable | 1 | 12 | This object represents the status of all General and Restricted Load Balancing Groups in this CMTS. This object summarizes the lo… |
| 1.3.6.1.4.1.4491.2.1.22.1.9 | docsLoadbal3RestrictCmCfgTable | 1 | 7 | This object describes the list of cable modems being statically provisioned at the CMTS to a Restricted Load Balancing Group. When… |
| 1.3.6.1.4.1.4491.2.1.22.1.10 | docsLoadbal3PolicyTable | 1 | 5 | This object describes the set of load balancing policies. Instances from this object might be referenced by GrpStatus object . Al… |
| 1.3.6.1.4.1.4491.2.1.22.1.11 | docsLoadbal3BasicRuleTable | 1 | 6 | This object represents a basic ruleset applicable to a load balancing policy that references it. |