Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"docsPnmCmtsUsOfdmaAQProbeTimeout",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"65535",
")",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute provides a timeout for the measurement if the CMTS is unable to perform the measurement for some reason. A value of zero for the Timeout attribute means that the measurement continues to be active until the measurement is completed or until the Enable attribute is cleared. This object cannot be changed while a capture is in progress. It will return a value of 'inconsistentValue' if set while the value of 'docsPnmCmtsUsOfdmaAQProbeMeasStatus' is set to a value of 'busy'. \"",
"REFERENCE",
"\"DOCSIS 3.1 CCAP Operations Support System Interface Specification, CM-SP-CCAP-OSSIv3.1, PNM section.\"",
"DEFVAL",
"{",
"1800",
"}",
"::=",
"{",
"docsPnmCmtsUsOfdmaAQProbeEntry",
"5",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
65535
]
]
]
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute provides a timeout for the measurement if the CMTS is unable to perform the measurement for some reason. A value of zero for the Timeout attribute means that the measurement continues to be active until the measurement is completed or until the Enable attribute is cleared. This object cannot be changed while a capture is in progress. It will return a value of 'inconsistentValue' if set while the value of 'docsPnmCmtsUsOfdmaAQProbeMeasStatus' is set to a value of 'busy'."
],
[
"REFERENCE",
"DOCSIS 3.1 CCAP Operations Support System Interface Specification, CM-SP-CCAP-OSSIv3.1, PNM section."
],
null,
null,
[
"DEFVAL",
1800
]
]
}