The signal to noise ratio perceived for this cable modem
on the upstream logical channel as of the last station
maintenance.
Parsed from file DOCS-IFEXT2-MIB.mib
Module: DOCS-IFEXT2-MIB
The signal to noise ratio perceived for this cable modem
on the upstream logical channel as of the last station
maintenance.
The signal to noise ratio perceived for this cable modem
on the upstream logical channel as of the last station
maintenance.
Parsed from file DOCS-IFEXT2-MIB.my.txt
Company: None
Module: DOCS-IFEXT2-MIB
The signal to noise ratio perceived for this cable modem
on the upstream logical channel as of the last station
maintenance.
docsIfExt2CmtsCmMscStatusMeasuredSNR OBJECT-TYPE SYNTAX TenthdB UNITS "TenthdB" MAX-ACCESS read-only STATUS current DESCRIPTION "The signal to noise ratio perceived for this cable modem on the upstream logical channel as of the last station maintenance." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification Section 6.2.18.2.2" ::= { docsIfExt2CmtsCmMscStatusEntry 5 }
docsIfExt2CmtsCmMscStatusMeasuredSNR OBJECT-TYPE SYNTAX TenthdB ACCESS read-only STATUS mandatory DESCRIPTION "The signal to noise ratio perceived for this cable modem on the upstream logical channel as of the last station maintenance." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification Section 6.2.18.2.2" ::= { docsIfExt2CmtsCmMscStatusEntry 5 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IFEXT2-MIB
[Automatically extracted from oidview.com]
docsIfExt2CmtsCmMscStatusMeasuredSNR OBJECT-TYPE SYNTAX TenthdB UNITS "TenthdB" MAX-ACCESS read-only STATUS current DESCRIPTION "The signal to noise ratio perceived for this cable modem on the upstream logical channel as of the last station maintenance." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification Section 6.2.18.2.2" ::= { docsIfExt2CmtsCmMscStatusEntry 5 }
docsIfExt2CmtsCmMscStatusMeasuredSNR OBJECT-TYPE SYNTAX TenthdB UNITS "TenthdB" MAX-ACCESS read-only STATUS current DESCRIPTION "The signal to noise ratio perceived for this cable modem on the upstream logical channel as of the last station maintenance." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification Section 6.2.18.2.2" ::= { docsIfExt2CmtsCmMscStatusEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4491.2.1.5.1.3.2.1.1 | docsIfExt2CmtsCmMscStatusPowerShortfall | 0 | 0 | Indicates the Power Shortfall at the CM, in units of tenth dB. The value is provided by the CM and is sent in the RNG-REQ message.… |
1.3.6.1.4.1.4491.2.1.5.1.3.2.1.2 | docsIfExt2CmtsCmMscStatusCodeRatio | 0 | 0 | Indicates the maximum ratio of number of active codes to Maximum Scheduled Codes that the CM reported in the Ranging Request. |
1.3.6.1.4.1.4491.2.1.5.1.3.2.1.3 | docsIfExt2CmtsCmMscStatusMaximumScheduledCodes | 0 | 0 | Indicates the Maximum Scheduled Codes value in use by the CM. The value is provided by the CMTS through a TLV in the RNG-RSP mess… |
1.3.6.1.4.1.4491.2.1.5.1.3.2.1.4 | docsIfExt2CmtsCmMscStatusPowerHeadroom | 0 | 0 | Indicates the Maximum Scheduled Codes Power Headroom in use by the CM, in units of tenth dB. The value is provided by the CMTS in… |
1.3.6.1.4.1.4491.2.1.5.1.3.2.1.6 | docsIfExt2CmtsCmMscStatusEffectiveSNR | 0 | 0 | The signal to noise ratio estimated for this cable modem on the upstream logical channel, referenced to 64QAM modulation. It is d… |