Reference record for OID 1.3.6.1.4.1.4491.2.1.6.1.3.2.1.1



parent
1.3.6.1.4.1.4491.2.1.6.1.3.2.1 (docsIfMCmtsEqamDownstreamCapabilitiesEntry)
node code
1
node name
docsIfMCmtsEqamDownstreamCapabFrequency
dot oid
1.3.6.1.4.1.4491.2.1.6.1.3.2.1.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsEqamDownstreamCapabilitiesTable(2) docsIfMCmtsEqamDownstreamCapabilitiesEntry(1) docsIfMCmtsEqamDownstreamCapabFrequency(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsEqamDownstreamCapabilitiesTable(2) docsIfMCmtsEqamDownstreamCapabilitiesEntry(1) docsIfMCmtsEqamDownstreamCapabFrequency(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsEqamDownstreamCapabilitiesTable(2) docsIfMCmtsEqamDownstreamCapabilitiesEntry(1) docsIfMCmtsEqamDownstreamCapabFrequency(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsEqamDownstreamCapabilitiesTable(2) docsIfMCmtsEqamDownstreamCapabilitiesEntry(1) docsIfMCmtsEqamDownstreamCapabFrequency(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsEqamDownstreamCapabilitiesTable(2) docsIfMCmtsEqamDownstreamCapabilitiesEntry(1) docsIfMCmtsEqamDownstreamCapabFrequency(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsEqamDownstreamCapabilitiesTable(2) docsIfMCmtsEqamDownstreamCapabilitiesEntry(1) docsIfMCmtsEqamDownstreamCapabFrequency(1)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsEqamDownstreamCapabilitiesTable/docsIfMCmtsEqamDownstreamCapabilitiesEntry/docsIfMCmtsEqamDownstreamCapabFrequency
  • /iso/identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsEqamDownstreamCapabilitiesTable/docsIfMCmtsEqamDownstreamCapabilitiesEntry/docsIfMCmtsEqamDownstreamCapabFrequency
  • /iso/org/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsEqamDownstreamCapabilitiesTable/docsIfMCmtsEqamDownstreamCapabilitiesEntry/docsIfMCmtsEqamDownstreamCapabFrequency
  • /iso/org/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsEqamDownstreamCapabilitiesTable/docsIfMCmtsEqamDownstreamCapabilitiesEntry/docsIfMCmtsEqamDownstreamCapabFrequency
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsEqamDownstreamCapabilitiesTable/docsIfMCmtsEqamDownstreamCapabilitiesEntry/docsIfMCmtsEqamDownstreamCapabFrequency
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsEqamDownstreamCapabilitiesTable/docsIfMCmtsEqamDownstreamCapabilitiesEntry/docsIfMCmtsEqamDownstreamCapabFrequency
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/4491/2/1/6/1/3/2/1/1

    Description by cisco_v1

    The QAM channel frequency capabilities.
    'eqamDependency' BIT set to '1' indicates the QAM channel
    frequency value has dependencies with other QAM channels
    and an entry that includes this QAM channel is in
    in docsIfMCmtsEqamGroupDependencyTable for the PHY
    parameter 'frequency'.

    'adjacentChannel' BIT set to '1' indicates the QAM channel
    frequencies in the dependency group (DEPI TSID group) are
    adjacent and constrained in a frequency range based on
    the number of QAM channels in the dependency group.

    'adjacentChannelOrder' BIT set to '1' indicates the QAM
    channel frequency adjacency is based in the QAM channel
    sequence like entPhysicalParentRelPos in EntPhysicalTable
    or other vendor sequence.

    e.g., a dependency group of four QAM channels
    with 'adjacentChannelOrder' BIT set to '1':
    The 4th QAM channel in the sequence gets a frequency
    assignment f + 1*bandwidth when the frequency value of
    the 3rd QAM channel in the sequence is set to f.
    Similarly the 1st QAM channel in the sequence gets a
    frequency assignment of f - 2*bandwidth and the 2nd QAM
    channels gets a frequency of f -1*bandwidth.

    'adjacentChannel' 'adjacentChannelOrder' BITs may be set to
    '1' when a dependency group includes the QAM channel
    of this M-CMTS Downstream interface and the value of the
    object docsIfMCmtsEqamGroupDependencyType is
    docsPHYParamAdjacentValues.

    'adjacentChannel' BIT may be set to '1' if
    'eqamDependency' BIT is set to '1'. The same way,
    'adjacentChannelOrder' BIT may be set to '1' and implies
    'adjacentChannel' BIT is set to '1'.

    Description by mibdepot

    The QAM channel frequency capabilities.
    'eqamDependency' BIT set to '1' indicates the QAM channel
    frequency value has dependencies with other QAM channels
    and an entry that includes this QAM channel is in
    in docsIfMCmtsEqamGroupDependencyTable for the PHY
    parameter 'frequency'.

    'adjacentChannel' BIT set to '1' indicates the QAM channel
    frequencies in the dependency group (DEPI TSID group) are
    adjacent and constrained in a frequency range based on
    the number of QAM channels in the dependency group.

    'adjacentChannelOrder' BIT set to '1' indicates the QAM
    channel frequency adjacency is based in the QAM channel
    sequence like entPhysicalParentRelPos in EntPhysicalTable
    or other vendor sequence.

    e.g., a dependency group of four QAM channels
    with 'adjacentChannelOrder' BIT set to '1':
    The 4th QAM channel in the sequence gets a frequency
    assignment f + 1*bandwidth when the frequency value of
    the 3rd QAM channel in the sequence is set to f.
    Similarly the 1st QAM channel in the sequence gets a
    frequency assignment of f - 2*bandwidth and the 2nd QAM
    channels gets a frequency of f -1*bandwidth.

    'adjacentChannel' 'adjacentChannelOrder' BITs may be set to
    '1' when a dependency group includes the QAM channel
    of this M-CMTS Downstream interface and the value of the
    object docsIfMCmtsEqamGroupDependencyType is
    docsPHYParamAdjacentValues.

    'adjacentChannel' BIT may be set to '1' if
    'eqamDependency' BIT is set to '1'. The same way,
    'adjacentChannelOrder' BIT may be set to '1' and implies
    'adjacentChannel' BIT is set to '1'.

    Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
    Company: None
    Module: DOCS-IF-M-CMTS-MIB

    Description by cisco

    The QAM channel frequency capabilities.
    'eqamDependency' BIT set to '1' indicates the QAM channel
    frequency value has dependencies with other QAM channels
    and an entry that includes this QAM channel is in
    in docsIfMCmtsEqamGroupDependencyTable for the PHY
    parameter 'frequency'.

    'adjacentChannel' BIT set to '1' indicates the QAM channel
    frequencies in the dependency group (DEPI TSID group) are
    adjacent and constrained in a frequency range based on
    the number of QAM channels in the dependency group.

    'adjacentChannelOrder' BIT set to '1' indicates the QAM
    channel frequency adjacency is based in the QAM channel
    sequence like entPhysicalParentRelPos in EntPhysicalTable
    or other vendor sequence.

    e.g., a dependency group of four QAM channels
    with 'adjacentChannelOrder' BIT set to '1':
    The 4th QAM channel in the sequence gets a frequency
    assignment f + 1*bandwidth when the frequency value of
    the 3rd QAM channel in the sequence is set to f.
    Similarly the 1st QAM channel in the sequence gets a
    frequency assignment of f - 2*bandwidth and the 2nd QAM
    channels gets a frequency of f -1*bandwidth.

    'adjacentChannel' 'adjacentChannelOrder' BITs may be set to
    '1' when a dependency group includes the QAM channel
    of this M-CMTS Downstream interface and the value of the
    object docsIfMCmtsEqamGroupDependencyType is
    docsPHYParamAdjacentValues.

    'adjacentChannel' BIT may be set to '1' if
    'eqamDependency' BIT is set to '1'. The same way,
    'adjacentChannelOrder' BIT may be set to '1' and implies
    'adjacentChannel' BIT is set to '1'.

    Information by cisco_v1

    docsIfMCmtsEqamDownstreamCapabFrequency OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..2))
        
        
        
        
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The QAM channel frequency capabilities. 
        'eqamDependency' BIT set to '1' indicates the QAM channel 
        frequency value has dependencies with other QAM channels  
        and an entry that includes this QAM channel is in  
        in docsIfMCmtsEqamGroupDependencyTable for the PHY  
        parameter 'frequency'. 
        
        'adjacentChannel' BIT set to '1' indicates the QAM channel 
        frequencies in the dependency group (DEPI TSID group) are  
        adjacent and constrained in a frequency range based on  
        the number of QAM channels in the dependency group. 
        
        'adjacentChannelOrder' BIT set to '1' indicates the QAM  
        channel frequency adjacency is based in the QAM channel  
        sequence like entPhysicalParentRelPos in EntPhysicalTable 
        or other vendor sequence. 
        
        e.g., a dependency group of four QAM channels  
        with 'adjacentChannelOrder' BIT set to '1': 
        The 4th QAM channel in the sequence gets a frequency 
        assignment f + 1*bandwidth when the frequency value of  
        the 3rd QAM channel in the sequence is set to f.  
        Similarly the 1st QAM channel in the sequence gets a  
        frequency assignment of f - 2*bandwidth and the 2nd QAM  
        channels gets a frequency of f -1*bandwidth. 
        
        'adjacentChannel' 'adjacentChannelOrder' BITs may be set to 
        '1' when a dependency group includes the QAM channel 
        of this M-CMTS Downstream interface and the value of the  
        object docsIfMCmtsEqamGroupDependencyType is  
        docsPHYParamAdjacentValues. 
        
        'adjacentChannel' BIT may be set to '1' if  
        'eqamDependency' BIT is set to '1'. The same way,  
        'adjacentChannelOrder' BIT may be set to '1' and implies 
        'adjacentChannel' BIT is set to '1'."
    ::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 1 }

    Information by oid_info

    Vendor: Cable Television Laboratories, Inc.
    Module: DOCS-IF-M-CMTS-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    docsIfMCmtsEqamDownstreamCapabFrequency OBJECT-TYPE
    SYNTAX          BITS {
                        eqamDependency(0),
                        adjacentChannel(1),
                        adjacentChannelOrder(2)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The QAM channel frequency capabilities.
        'eqamDependency' BIT set to '1' indicates the QAM channel
        frequency value has dependencies with other QAM channels 
        and an entry that includes this QAM channel is in 
        in docsIfMCmtsEqamGroupDependencyTable for the PHY 
        parameter 'frequency'.

        'adjacentChannel' BIT set to '1' indicates the QAM channel
        frequencies in the dependency group (DEPI TSID group) are 
        adjacent and constrained in a frequency range based on 
        the number of QAM channels in the dependency group.

        'adjacentChannelOrder' BIT set to '1' indicates the QAM 
        channel frequency adjacency is based in the QAM channel 
        sequence like entPhysicalParentRelPos in EntPhysicalTable
        or other vendor sequence.

        e.g., a dependency group of four QAM channels 
        with 'adjacentChannelOrder' BIT set to '1':
        The 4th QAM channel in the sequence gets a frequency
        assignment f + 1*bandwidth when the frequency value of 
        the 3rd QAM channel in the sequence is set to f. 
        Similarly the 1st QAM channel in the sequence gets a 
        frequency assignment of f - 2*bandwidth and the 2nd QAM 
        channels gets a frequency of f -1*bandwidth.

        'adjacentChannel' 'adjacentChannelOrder' BITs may be set to
        '1' when a dependency group includes the QAM channel
        of this M-CMTS Downstream interface and the value of the 
        object docsIfMCmtsEqamGroupDependencyType is 
        docsPHYParamAdjacentValues.

        'adjacentChannel' BIT may be set to '1' if 
        'eqamDependency' BIT is set to '1'. The same way, 
        'adjacentChannelOrder' BIT may be set to '1' and implies
        'adjacentChannel' BIT is set to '1'." 
    ::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 1 }

    Information by cisco

    docsIfMCmtsEqamDownstreamCapabFrequency OBJECT-TYPE
    SYNTAX          BITS {
                        eqamDependency(0),
                        adjacentChannel(1),
                        adjacentChannelOrder(2)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The QAM channel frequency capabilities.
        'eqamDependency' BIT set to '1' indicates the QAM channel
        frequency value has dependencies with other QAM channels 
        and an entry that includes this QAM channel is in 
        in docsIfMCmtsEqamGroupDependencyTable for the PHY 
        parameter 'frequency'.

        'adjacentChannel' BIT set to '1' indicates the QAM channel
        frequencies in the dependency group (DEPI TSID group) are 
        adjacent and constrained in a frequency range based on 
        the number of QAM channels in the dependency group.

        'adjacentChannelOrder' BIT set to '1' indicates the QAM 
        channel frequency adjacency is based in the QAM channel 
        sequence like entPhysicalParentRelPos in EntPhysicalTable
        or other vendor sequence.

        e.g., a dependency group of four QAM channels 
        with 'adjacentChannelOrder' BIT set to '1':
        The 4th QAM channel in the sequence gets a frequency
        assignment f + 1*bandwidth when the frequency value of 
        the 3rd QAM channel in the sequence is set to f. 
        Similarly the 1st QAM channel in the sequence gets a 
        frequency assignment of f - 2*bandwidth and the 2nd QAM 
        channels gets a frequency of f -1*bandwidth.

        'adjacentChannel' 'adjacentChannelOrder' BITs may be set to
        '1' when a dependency group includes the QAM channel
        of this M-CMTS Downstream interface and the value of the 
        object docsIfMCmtsEqamGroupDependencyType is 
        docsPHYParamAdjacentValues.

        'adjacentChannel' BIT may be set to '1' if 
        'eqamDependency' BIT is set to '1'. The same way, 
        'adjacentChannelOrder' BIT may be set to '1' and implies
        'adjacentChannel' BIT is set to '1'." 
    ::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 1 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Ralph Brown

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Maria Stachelek

    Brothers (8)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.4491.2.1.6.1.3.2.1.2 docsIfMCmtsEqamDownstreamCapabBandwidth 0 0 The QAM channel Bandwidth capabilities.
    'eqamDependency' BIT set to '1' indicates the QAM channel
    bandwidth value has dependencie…
    1.3.6.1.4.1.4491.2.1.6.1.3.2.1.3 docsIfMCmtsEqamDownstreamCapabPower 0 0 The QAM channel Power capabilities.
    'eqamDependency' BIT set to '1' indicates the QAM channel
    power value has dependencies with o…
    1.3.6.1.4.1.4491.2.1.6.1.3.2.1.4 docsIfMCmtsEqamDownstreamCapabModulation 0 0 The QAM channel Modulation capabilities.
    'eqamDependency' BIT set to '1' indicates the QAM channel
    modulation value has dependenc…
    1.3.6.1.4.1.4491.2.1.6.1.3.2.1.5 docsIfMCmtsEqamDownstreamCapabInterleaver 0 0 The QAM channel Interleaver capabilities.
    'eqamDependency' BIT set to '1' indicates the QAM channel
    interleave value has dependen…
    1.3.6.1.4.1.4491.2.1.6.1.3.2.1.6 docsIfMCmtsEqamDownstreamCapabJ83Annex 0 0 The QAM channel J.83 Annex Capabilities.
    'eqamDependency' BIT set to '1' indicates the QAM channel
    J.83 Annex value has dependenc…
    1.3.6.1.4.1.4491.2.1.6.1.3.2.1.7 docsIfMCmtsEqamDownstreamCapabConcurrentServices 0 0 The QAM channel Concurrent Services Capabilities.
    'eqamDependency' BIT set to '1' indicates the QAM channel
    is part of a dependen…
    1.3.6.1.4.1.4491.2.1.6.1.3.2.1.8 docsIfMCmtsEqamDownstreamCapabServicesTransport 0 0 The QAM channel Services transports modes Capabilities.

    'eqamDependency' BIT set to '1' indicates the QAM channel
    Service transpo…
    1.3.6.1.4.1.4491.2.1.6.1.3.2.1.9 docsIfMCmtsEqamDownstreamCapabMuting 0 0 The QAM channel muting capabilities.
    'eqamDependency' BIT set to '1' indicates the EQAM Mute
    state has dependencies with other QA…