Reference record for OID 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.5



parent
1.3.6.1.4.1.4491.2.1.6.1.3.5.1 (docsIfMCmtsChannelBlockEntry)
node code
5
node name
docsIfMCmtsChannelBlockTestType
dot oid
1.3.6.1.4.1.4491.2.1.6.1.3.5.1.5
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsChannelBlockTable(5) docsIfMCmtsChannelBlockEntry(1) docsIfMCmtsChannelBlockTestType(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsChannelBlockTable(5) docsIfMCmtsChannelBlockEntry(1) docsIfMCmtsChannelBlockTestType(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsChannelBlockTable(5) docsIfMCmtsChannelBlockEntry(1) docsIfMCmtsChannelBlockTestType(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsChannelBlockTable(5) docsIfMCmtsChannelBlockEntry(1) docsIfMCmtsChannelBlockTestType(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsChannelBlockTable(5) docsIfMCmtsChannelBlockEntry(1) docsIfMCmtsChannelBlockTestType(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsEqamObjects(3) docsIfMCmtsChannelBlockTable(5) docsIfMCmtsChannelBlockEntry(1) docsIfMCmtsChannelBlockTestType(5)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsChannelBlockTable/docsIfMCmtsChannelBlockEntry/docsIfMCmtsChannelBlockTestType
  • /iso/identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsChannelBlockTable/docsIfMCmtsChannelBlockEntry/docsIfMCmtsChannelBlockTestType
  • /iso/org/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsChannelBlockTable/docsIfMCmtsChannelBlockEntry/docsIfMCmtsChannelBlockTestType
  • /iso/org/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsChannelBlockTable/docsIfMCmtsChannelBlockEntry/docsIfMCmtsChannelBlockTestType
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsChannelBlockTable/docsIfMCmtsChannelBlockEntry/docsIfMCmtsChannelBlockTestType
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsEqamObjects/docsIfMCmtsChannelBlockTable/docsIfMCmtsChannelBlockEntry/docsIfMCmtsChannelBlockTestType
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/4491/2/1/6/1/3/5/1/5

    Description by cisco_v1

    A set of in-service and out-of-service test modes.
    The value 'noTest'(1) is the normal condition after
    reinitialization where the QAM channels are expected in
    operation.

    'noTest'
    It is also used to take out of testing mode
    a QAM channel within the block.

    In-service tests modes:
    'offOthersNormal'
    It is the condition where the QAM Channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex has its carrier
    suppressed and the other channels in the
    Block Channel are operational.
    'allOff'
    All QAM channels carriers in the channel block are
    Suppressed.
    'onOthersOff'
    It is the condition where the QAM channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex is in operation
    and the other QAM channels in the channel Block have
    their carriers suppressed.

    Out-of-service test modes:
    'cwOnOthersOff'
    It is the condition where the QAM channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex transmits a
    continuous wave (CW) while the other QAM
    channels in the channel Block have their carriers
    suppressed.
    'cwOnOthersNormal'
    It is the condition where the QAM channel indicated
    in docsIfMCmtsChannelBlockTestIfIndex transmits a
    continuous wave (CW) while the other QAM channels in
    the channel Block are operational.

    'clockTest'
    It is the condition where the QAM channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex transmits a sequence
    of alternating -1 and 1 symbols.

    This object value does not persist after system
    Reinitialization.
    The value of this object is meaningless if
    docsIfMCmtsChannelBlockTestIfIndex is set to zero.

    Description by mibdepot

    A set of in-service and out-of-service test modes.
    The value 'noTest'(1) is the normal condition after
    reinitialization where the QAM channels are expected in
    operation.

    'noTest'
    It is also used to take out of testing mode
    a QAM channel within the block.

    In-service tests modes:
    'offOthersNormal'
    It is the condition where the QAM Channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex has its carrier
    suppressed and the other channels in the
    Block Channel are operational.
    'allOff'
    All QAM channels carriers in the channel block are
    Suppressed.
    'onOthersOff'
    It is the condition where the QAM channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex is in operation
    and the other QAM channels in the channel Block have
    their carriers suppressed.

    Out-of-service test modes:
    'cwOnOthersOff'
    It is the condition where the QAM channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex transmits a
    continuous wave (CW) while the other QAM
    channels in the channel Block have their carriers
    suppressed.
    'cwOnOthersNormal'
    It is the condition where the QAM channel indicated
    in docsIfMCmtsChannelBlockTestIfIndex transmits a
    continuous wave (CW) while the other QAM channels in
    the channel Block are operational.

    'clockTest'
    It is the condition where the QAM channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex transmits a sequence
    of alternating -1 and 1 symbols.

    This object value does not persist after system
    Reinitialization.
    The value of this object is meaningless if
    docsIfMCmtsChannelBlockTestIfIndex is set to zero.

    Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
    Company: None
    Module: DOCS-IF-M-CMTS-MIB

    Description by cisco

    A set of in-service and out-of-service test modes.
    The value 'noTest'(1) is the normal condition after
    reinitialization where the QAM channels are expected in
    operation.

    'noTest'
    It is also used to take out of testing mode
    a QAM channel within the block.

    In-service tests modes:
    'offOthersNormal'
    It is the condition where the QAM Channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex has its carrier
    suppressed and the other channels in the
    Block Channel are operational.
    'allOff'
    All QAM channels carriers in the channel block are
    Suppressed.
    'onOthersOff'
    It is the condition where the QAM channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex is in operation
    and the other QAM channels in the channel Block have
    their carriers suppressed.

    Out-of-service test modes:
    'cwOnOthersOff'
    It is the condition where the QAM channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex transmits a
    continuous wave (CW) while the other QAM
    channels in the channel Block have their carriers
    suppressed.
    'cwOnOthersNormal'
    It is the condition where the QAM channel indicated
    in docsIfMCmtsChannelBlockTestIfIndex transmits a
    continuous wave (CW) while the other QAM channels in
    the channel Block are operational.

    'clockTest'
    It is the condition where the QAM channel indicated in
    docsIfMCmtsChannelBlockTestIfIndex transmits a sequence
    of alternating -1 and 1 symbols.

    This object value does not persist after system
    Reinitialization.
    The value of this object is meaningless if
    docsIfMCmtsChannelBlockTestIfIndex is set to zero.

    Information by cisco_v1

    docsIfMCmtsChannelBlockTestType OBJECT-TYPE
    SYNTAX INTEGER {
        noTest(1),
        offOthersNormal(2),
        allOff(3),
        onOthersOff(4),
        cwOnOthersOff(5),
        cwOnOthersNormal(6),
        clockTest(7)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A set of in-service and out-of-service test modes. 
        The value 'noTest'(1) is the normal condition after 
        reinitialization where the QAM channels are expected in 
        operation. 
        
        'noTest'  
        It is also used to take out of testing mode 
        a QAM channel within the block. 
        
        In-service tests modes: 
        'offOthersNormal' 
        It is the condition where the QAM Channel indicated in 
        docsIfMCmtsChannelBlockTestIfIndex has its carrier  
        suppressed and the other channels in the  
        Block Channel are operational. 
        'allOff' 
        All QAM channels carriers in the channel block are 
        Suppressed.  
        'onOthersOff' 
        It is the condition where the QAM channel indicated in 
        docsIfMCmtsChannelBlockTestIfIndex is in operation 
        and the other QAM channels in the channel Block have 
        their carriers suppressed. 
        
        Out-of-service test modes: 
        'cwOnOthersOff' 
        It is the condition where the QAM channel indicated in  
        docsIfMCmtsChannelBlockTestIfIndex transmits a  
        continuous wave (CW) while the other QAM  
        channels in the channel Block have their carriers  
        suppressed. 
        'cwOnOthersNormal' 
        It is the condition where the QAM channel indicated 
        in docsIfMCmtsChannelBlockTestIfIndex transmits a  
        continuous wave (CW) while the other QAM channels in 
        the channel Block are operational. 
        
        'clockTest' 
        It is the condition where the QAM channel indicated in 
        docsIfMCmtsChannelBlockTestIfIndex transmits a sequence  
        of alternating -1 and 1 symbols. 
        
        This object value does not persist after system  
        Reinitialization. 
        The value of this object is meaningless if  
        docsIfMCmtsChannelBlockTestIfIndex is set to zero."
    ::= { docsIfMCmtsChannelBlockEntry 5 }

    Information by oid_info

    Vendor: Cable Television Laboratories, Inc.
    Module: DOCS-IF-M-CMTS-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    docsIfMCmtsChannelBlockTestType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        noTest(1),
                        offOthersNormal(2),
                        allOff(3),
                        onOthersOff(4),
                        cwOnOthersOff(5),
                        cwOnOthersNormal(6),
                        clockTest(7)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "A set of in-service and out-of-service test modes.
        The value 'noTest'(1) is the normal condition after
        reinitialization where the QAM channels are expected in
        operation.

        'noTest' 
        It is also used to take out of testing mode
        a QAM channel within the block.

        In-service tests modes:
        'offOthersNormal'
        It is the condition where the QAM Channel indicated in
        docsIfMCmtsChannelBlockTestIfIndex has its carrier 
        suppressed and the other channels in the 
        Block Channel are operational.
        'allOff'
        All QAM channels carriers in the channel block are
        Suppressed. 
        'onOthersOff'
        It is the condition where the QAM channel indicated in
        docsIfMCmtsChannelBlockTestIfIndex is in operation
        and the other QAM channels in the channel Block have
        their carriers suppressed.

        Out-of-service test modes:
        'cwOnOthersOff'
        It is the condition where the QAM channel indicated in 
        docsIfMCmtsChannelBlockTestIfIndex transmits a 
        continuous wave (CW) while the other QAM 
        channels in the channel Block have their carriers 
        suppressed.
        'cwOnOthersNormal'
        It is the condition where the QAM channel indicated
        in docsIfMCmtsChannelBlockTestIfIndex transmits a 
        continuous wave (CW) while the other QAM channels in
        the channel Block are operational.

        'clockTest'
        It is the condition where the QAM channel indicated in
        docsIfMCmtsChannelBlockTestIfIndex transmits a sequence 
        of alternating -1 and 1 symbols.

        This object value does not persist after system 
        Reinitialization.
        The value of this object is meaningless if 
        docsIfMCmtsChannelBlockTestIfIndex is set to zero." 
    ::= { docsIfMCmtsChannelBlockEntry 5 }

    Information by cisco

    docsIfMCmtsChannelBlockTestType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        noTest(1),
                        offOthersNormal(2),
                        allOff(3),
                        onOthersOff(4),
                        cwOnOthersOff(5),
                        cwOnOthersNormal(6),
                        clockTest(7)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "A set of in-service and out-of-service test modes.
        The value 'noTest'(1) is the normal condition after
        reinitialization where the QAM channels are expected in
        operation.

        'noTest' 
        It is also used to take out of testing mode
        a QAM channel within the block.

        In-service tests modes:
        'offOthersNormal'
        It is the condition where the QAM Channel indicated in
        docsIfMCmtsChannelBlockTestIfIndex has its carrier 
        suppressed and the other channels in the 
        Block Channel are operational.
        'allOff'
        All QAM channels carriers in the channel block are
        Suppressed. 
        'onOthersOff'
        It is the condition where the QAM channel indicated in
        docsIfMCmtsChannelBlockTestIfIndex is in operation
        and the other QAM channels in the channel Block have
        their carriers suppressed.

        Out-of-service test modes:
        'cwOnOthersOff'
        It is the condition where the QAM channel indicated in 
        docsIfMCmtsChannelBlockTestIfIndex transmits a 
        continuous wave (CW) while the other QAM 
        channels in the channel Block have their carriers 
        suppressed.
        'cwOnOthersNormal'
        It is the condition where the QAM channel indicated
        in docsIfMCmtsChannelBlockTestIfIndex transmits a 
        continuous wave (CW) while the other QAM channels in
        the channel Block are operational.

        'clockTest'
        It is the condition where the QAM channel indicated in
        docsIfMCmtsChannelBlockTestIfIndex transmits a sequence 
        of alternating -1 and 1 symbols.

        This object value does not persist after system 
        Reinitialization.
        The value of this object is meaningless if 
        docsIfMCmtsChannelBlockTestIfIndex is set to zero." 
    ::= { docsIfMCmtsChannelBlockEntry 5 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Ralph Brown

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Maria Stachelek

    Brothers (5)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.4491.2.1.6.1.3.5.1.1 docsIfMCmtsChannelBlockPhysicalIndex 0 0 The Physical Index of the QAM Channel Block.
    1.3.6.1.4.1.4491.2.1.6.1.3.5.1.2 docsIfMCmtsChannelBlockNumberChannels 0 0 The Number of QAM Channels N associated to this entry.
    1.3.6.1.4.1.4491.2.1.6.1.3.5.1.3 docsIfMCmtsChannelBlockCfgNumberChannels 0 0 The Number of QAM Channels N' to configure for the
    QAM block.
    The maximum number of channels per block follows the
    consideration o…
    1.3.6.1.4.1.4491.2.1.6.1.3.5.1.4 docsIfMCmtsChannelBlockMute 0 0 The Mute control object for the Block Channel
    A set to this object to 'true' is reflected in
    ifOperStatus set to 'down' of the QA…
    1.3.6.1.4.1.4491.2.1.6.1.3.5.1.6 docsIfMCmtsChannelBlockTestIfIndex 0 0 The ifIndex of the QAM channel to perform the QAM
    channel test.
    A Set to a value that does not correspond to a QAM
    Channel within …