Reference record for OID 1.3.6.1.4.1.4491.2.1.6.1.4.1.3

parent

1.3.6.1.4.1.4491.2.1.6.1.4.1 (docsIfMCmtsDepiSessionObjects)

node code

3

node name

docsIfMCmtsDepiRsrcAllocTable

dot oid

1.3.6.1.4.1.4491.2.1.6.1.4.1.3

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsDepiObjects(4) docsIfMCmtsDepiSessionObjects(1) docsIfMCmtsDepiRsrcAllocTable(3)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsDepiObjects(4) docsIfMCmtsDepiSessionObjects(1) docsIfMCmtsDepiRsrcAllocTable(3)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsDepiObjects(4) docsIfMCmtsDepiSessionObjects(1) docsIfMCmtsDepiRsrcAllocTable(3)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsDepiObjects(4) docsIfMCmtsDepiSessionObjects(1) docsIfMCmtsDepiRsrcAllocTable(3)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsDepiObjects(4) docsIfMCmtsDepiSessionObjects(1) docsIfMCmtsDepiRsrcAllocTable(3)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsIfMCmtsMib(6) docsIfMCmtsObjects(1) docsIfMCmtsDepiObjects(4) docsIfMCmtsDepiSessionObjects(1) docsIfMCmtsDepiRsrcAllocTable(3)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsDepiObjects/docsIfMCmtsDepiSessionObjects/docsIfMCmtsDepiRsrcAllocTable

/iso/identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsDepiObjects/docsIfMCmtsDepiSessionObjects/docsIfMCmtsDepiRsrcAllocTable

/iso/org/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsDepiObjects/docsIfMCmtsDepiSessionObjects/docsIfMCmtsDepiRsrcAllocTable

/iso/org/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsDepiObjects/docsIfMCmtsDepiSessionObjects/docsIfMCmtsDepiRsrcAllocTable

/iso/iso-identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsDepiObjects/docsIfMCmtsDepiSessionObjects/docsIfMCmtsDepiRsrcAllocTable

/iso/iso-identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsIfMCmtsMib/docsIfMCmtsObjects/docsIfMCmtsDepiObjects/docsIfMCmtsDepiSessionObjects/docsIfMCmtsDepiRsrcAllocTable

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/4491/2/1/6/1/4/1/3

Description by cisco_v1

A table containing PHBIDs Resources used for DEPI
applications.

At the M-CMTS core these entries contain information
about the mapping of egress traffic to PHIDs and DEPI flow
IDs also known as DEPI payload encapsulation.

For the M-CMTS Core there are two type of entries:
o One set of entries is a preconfigured list of PHBIDs
used for M-CMTS requests to EQAM IP Host, e.g., the MIB
object docsIfMCmtsDepiSessionConfigRsrcAllocReq
references those type of entry sets.
In those entries the values of
docsIfMCmtsDepiRsrcAllocUdpPort,
docsIfMCmtsDepiRsrcAllocFlowId and
docsIfMCmtsDepiRsrcAllocPolicyScnTags
are ignored by the M-CMTS.

o The second set of entries has the responses from the EQAM
IP host to the M-CMTS when the DEPI session request is
successful. The object
docsIfMCmtsDepiSessionConfigPhbIdResp in
docsIfMCmtsDepiSessionConfigTable references an entry of
this type.

The EQAM MAY implement this table to configure the
different queue prioritization of the DEPI flow IDs, PHBIDs
and UDP ports triplet used in the DEPI Resource allocation
response to the M-CMTS. If this table is not implemented by
the EQAM device the object
docsIfMCmtsDepiSessionInfoRsrcAllocResp is
set to zero, and the DEPI session Resource Allocation
response is vendor specific. Also the EQAM device MAY
implement this table as read-only for the purpose of
debugging the DEPI Resource Allocation Responses sent to
the M-CMTS core.

Description by mibdepot

A table containing PHBIDs Resources used for DEPI
applications.

At the M-CMTS core these entries contain information
about the mapping of egress traffic to PHIDs and DEPI flow
IDs also known as DEPI payload encapsulation.

For the M-CMTS Core there are two type of entries:
o One set of entries is a preconfigured list of PHBIDs
used for M-CMTS requests to EQAM IP Host, e.g., the MIB
object docsIfMCmtsDepiSessionConfigRsrcAllocReq
references those type of entry sets.
In those entries the values of
docsIfMCmtsDepiRsrcAllocUdpPort,
docsIfMCmtsDepiRsrcAllocFlowId and
docsIfMCmtsDepiRsrcAllocPolicyScnTags
are ignored by the M-CMTS.

o The second set of entries has the responses from the EQAM
IP host to the M-CMTS when the DEPI session request is
successful. The object
docsIfMCmtsDepiSessionConfigPhbIdResp in
docsIfMCmtsDepiSessionConfigTable references an entry of
this type.

The EQAM MAY implement this table to configure the
different queue prioritization of the DEPI flow IDs, PHBIDs
and UDP ports triplet used in the DEPI Resource allocation
response to the M-CMTS. If this table is not implemented by
the EQAM device the object
docsIfMCmtsDepiSessionInfoRsrcAllocResp is
set to zero, and the DEPI session Resource Allocation
response is vendor specific. Also the EQAM device MAY
implement this table as read-only for the purpose of
debugging the DEPI Resource Allocation Responses sent to
the M-CMTS core.

Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
Company: None
Module: DOCS-IF-M-CMTS-MIB

Description by cisco

A table containing PHBIDs Resources used for DEPI
applications.

At the M-CMTS core these entries contain information
about the mapping of egress traffic to PHIDs and DEPI flow
IDs also known as DEPI payload encapsulation.

For the M-CMTS Core there are two type of entries:
o One set of entries is a preconfigured list of PHBIDs
used for M-CMTS requests to EQAM IP Host, e.g., the MIB
object docsIfMCmtsDepiSessionConfigRsrcAllocReq
references those type of entry sets.
In those entries the values of
docsIfMCmtsDepiRsrcAllocUdpPort,
docsIfMCmtsDepiRsrcAllocFlowId and
docsIfMCmtsDepiRsrcAllocPolicyScnTags
are ignored by the M-CMTS.

o The second set of entries has the responses from the EQAM
IP host to the M-CMTS when the DEPI session request is
successful. The object
docsIfMCmtsDepiSessionConfigPhbIdResp in
docsIfMCmtsDepiSessionConfigTable references an entry of
this type.

The EQAM MAY implement this table to configure the
different queue prioritization of the DEPI flow IDs, PHBIDs
and UDP ports triplet used in the DEPI Resource allocation
response to the M-CMTS. If this table is not implemented by
the EQAM device the object
docsIfMCmtsDepiSessionInfoRsrcAllocResp is
set to zero, and the DEPI session Resource Allocation
response is vendor specific. Also the EQAM device MAY
implement this table as read-only for the purpose of
debugging the DEPI Resource Allocation Responses sent to
the M-CMTS core.

Information by cisco_v1

docsIfMCmtsDepiRsrcAllocTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DocsIfMCmtsDepiRsrcAllocEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table containing PHBIDs Resources used for DEPI 
        applications. 
        
        At the M-CMTS core these entries contain information 
        about the mapping of egress traffic to PHIDs and DEPI flow 
        IDs also known as DEPI payload encapsulation. 
        
        For the M-CMTS Core there are two type of entries: 
        o One set of entries is a preconfigured list of PHBIDs  
          used for M-CMTS requests to EQAM IP Host, e.g., the MIB  
          object docsIfMCmtsDepiSessionConfigRsrcAllocReq 
          references those type of entry sets. 
          In those entries the values of  
          docsIfMCmtsDepiRsrcAllocUdpPort,  
          docsIfMCmtsDepiRsrcAllocFlowId and  
          docsIfMCmtsDepiRsrcAllocPolicyScnTags 
          are ignored by the M-CMTS. 
        
        o The second set of entries has the responses from the EQAM 
          IP host to the M-CMTS when the DEPI session request is 
          successful. The object  
          docsIfMCmtsDepiSessionConfigPhbIdResp in  
          docsIfMCmtsDepiSessionConfigTable references an entry of 
          this type. 
        
        The EQAM MAY implement this table to configure the  
        different queue prioritization of the DEPI flow IDs, PHBIDs 
        and UDP ports triplet used in the DEPI Resource allocation 
        response to the M-CMTS. If this table is not implemented by 
        the EQAM device the object  
        docsIfMCmtsDepiSessionInfoRsrcAllocResp is 
        set to zero, and the DEPI session Resource Allocation  
        response is vendor specific. Also the EQAM device MAY  
        implement this table as read-only for the purpose of  
        debugging the DEPI Resource Allocation Responses sent to 
        the M-CMTS core."
    ::= { docsIfMCmtsDepiSessionObjects 3 }

Information by oid_info

Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IF-M-CMTS-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

docsIfMCmtsDepiRsrcAllocTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF DocsIfMCmtsDepiRsrcAllocEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A table containing PHBIDs Resources used for DEPI
        applications.

        At the M-CMTS core these entries contain information
        about the mapping of egress traffic to PHIDs and DEPI flow
        IDs also known as DEPI payload encapsulation.

        For the M-CMTS Core there are two type of entries:
        o One set of entries is a preconfigured list of PHBIDs 
          used for M-CMTS requests to EQAM IP Host, e.g., the MIB 
          object docsIfMCmtsDepiSessionConfigRsrcAllocReq
          references those type of entry sets.
          In those entries the values of 
          docsIfMCmtsDepiRsrcAllocUdpPort, 
          docsIfMCmtsDepiRsrcAllocFlowId and 
          docsIfMCmtsDepiRsrcAllocPolicyScnTags
          are ignored by the M-CMTS.

        o The second set of entries has the responses from the EQAM
          IP host to the M-CMTS when the DEPI session request is
          successful. The object 
          docsIfMCmtsDepiSessionConfigPhbIdResp in 
          docsIfMCmtsDepiSessionConfigTable references an entry of
          this type.

        The EQAM MAY implement this table to configure the 
        different queue prioritization of the DEPI flow IDs, PHBIDs
        and UDP ports triplet used in the DEPI Resource allocation
        response to the M-CMTS. If this table is not implemented by
        the EQAM device the object 
        docsIfMCmtsDepiSessionInfoRsrcAllocResp is
        set to zero, and the DEPI session Resource Allocation 
        response is vendor specific. Also the EQAM device MAY 
        implement this table as read-only for the purpose of 
        debugging the DEPI Resource Allocation Responses sent to
        the M-CMTS core."
    ::= { docsIfMCmtsDepiSessionObjects 3 }

Information by cisco

docsIfMCmtsDepiRsrcAllocTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF DocsIfMCmtsDepiRsrcAllocEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A table containing PHBIDs Resources used for DEPI
        applications.

        At the M-CMTS core these entries contain information
        about the mapping of egress traffic to PHIDs and DEPI flow
        IDs also known as DEPI payload encapsulation.

        For the M-CMTS Core there are two type of entries:
        o One set of entries is a preconfigured list of PHBIDs 
          used for M-CMTS requests to EQAM IP Host, e.g., the MIB 
          object docsIfMCmtsDepiSessionConfigRsrcAllocReq
          references those type of entry sets.
          In those entries the values of 
          docsIfMCmtsDepiRsrcAllocUdpPort, 
          docsIfMCmtsDepiRsrcAllocFlowId and 
          docsIfMCmtsDepiRsrcAllocPolicyScnTags
          are ignored by the M-CMTS.

        o The second set of entries has the responses from the EQAM
          IP host to the M-CMTS when the DEPI session request is
          successful. The object 
          docsIfMCmtsDepiSessionConfigPhbIdResp in 
          docsIfMCmtsDepiSessionConfigTable references an entry of
          this type.

        The EQAM MAY implement this table to configure the 
        different queue prioritization of the DEPI flow IDs, PHBIDs
        and UDP ports triplet used in the DEPI Resource allocation
        response to the M-CMTS. If this table is not implemented by
        the EQAM device the object 
        docsIfMCmtsDepiSessionInfoRsrcAllocResp is
        set to zero, and the DEPI session Resource Allocation 
        response is vendor specific. Also the EQAM device MAY 
        implement this table as read-only for the purpose of 
        debugging the DEPI Resource Allocation Responses sent to
        the M-CMTS core."
    ::= { docsIfMCmtsDepiSessionObjects 3 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

Ralph Brown

Current Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

Maria Stachelek

Children (1)

Brothers (5)