Reference record for OID 1.3.6.1.4.1.4491.2.1.7.1.2.2.4



parent
1.3.6.1.4.1.4491.2.1.7.1.2.2 (dtiServerGlobalParameters)
node code
4
node name
dtiServerGlobalToDMethod
dot oid
1.3.6.1.4.1.4491.2.1.7.1.2.2.4
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) dtiMib(7) dtiMibObjects(1) dtiServerObjects(2) dtiServerGlobalParameters(2) dtiServerGlobalToDMethod(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) dtiMib(7) dtiMibObjects(1) dtiServerObjects(2) dtiServerGlobalParameters(2) dtiServerGlobalToDMethod(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) dtiMib(7) dtiMibObjects(1) dtiServerObjects(2) dtiServerGlobalParameters(2) dtiServerGlobalToDMethod(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) dtiMib(7) dtiMibObjects(1) dtiServerObjects(2) dtiServerGlobalParameters(2) dtiServerGlobalToDMethod(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) dtiMib(7) dtiMibObjects(1) dtiServerObjects(2) dtiServerGlobalParameters(2) dtiServerGlobalToDMethod(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) dtiMib(7) dtiMibObjects(1) dtiServerObjects(2) dtiServerGlobalParameters(2) dtiServerGlobalToDMethod(4)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/dtiMib/dtiMibObjects/dtiServerObjects/dtiServerGlobalParameters/dtiServerGlobalToDMethod
  • /iso/identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/dtiMib/dtiMibObjects/dtiServerObjects/dtiServerGlobalParameters/dtiServerGlobalToDMethod
  • /iso/org/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/dtiMib/dtiMibObjects/dtiServerObjects/dtiServerGlobalParameters/dtiServerGlobalToDMethod
  • /iso/org/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/dtiMib/dtiMibObjects/dtiServerObjects/dtiServerGlobalParameters/dtiServerGlobalToDMethod
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/dtiMib/dtiMibObjects/dtiServerObjects/dtiServerGlobalParameters/dtiServerGlobalToDMethod
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/dtiMib/dtiMibObjects/dtiServerObjects/dtiServerGlobalParameters/dtiServerGlobalToDMethod
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/4491/2/1/7/1/2/2/4

    Description by circitor

    Selects the type of ToD Source for the DTI server
    operation. The set of this object to its enumerated
    values is described below:

    'default' instructs the DTI server to use the last ToD
    reference as the value for its internal clock.
    'userTime' instructs the DTI server to use the value of
    dtiServerGlobalToDValue for the DTI server internal
    time ticks clock.
    'ntpv4' instructs the DTI server to use the NTP Network
    Time Protocol version 4 as the ToD reference.
    'gps' instructs the DTI server to use the GPS gpssec ToD
    as the ToD reference.

    It is recommended to reject an SNMP SET to a particular ToD
    method if such ToD capability is not active or requires
    other configuration steps.

    A successful set of this object sets to a zero length
    string all the DTI Client-Server connections that
    previously were set via dtiProtocolControlToDValue to
    particular ToD Values.

    Parsed from file DTI-MIB.mib
    Module: DTI-MIB

    Description by cisco_v1

    Selects the type of ToD Source for the DTI server
    operation. The set of this object to its enumerated
    values is described below:

    'default' instructs the DTI server to use the last ToD
    reference as the value for its internal clock.
    'userTime' instructs the DTI server to use the value of
    dtiServerGlobalToDValue for the DTI server internal
    time ticks clock.
    'ntpv4' instructs the DTI server to use the NTP Network
    Time Protocol version 4 as the ToD reference.
    'gps' instructs the DTI server to use the GPS gpssec ToD
    as the ToD reference.

    It is recommended to reject an SNMP SET to a particular ToD
    method if such ToD capability is not active or requires
    other configuration steps.

    A successful set of this object sets to a zero length
    string all the DTI Client-Server connections that
    previously were set via dtiProtocolControlToDValue to
    particular ToD Values.

    Description by mibdepot

    Selects the type of ToD Source for the DTI server
    operation. The set of this object to its enumerated
    values is described below:

    'default' instructs the DTI server to use the last ToD
    reference as the value for its internal clock.
    'userTime' instructs the DTI server to use the value of
    dtiServerGlobalToDValue for the DTI server internal
    time ticks clock.
    'ntpv4' instructs the DTI server to use the NTP Network
    Time Protocol version 4 as the ToD reference.
    'gps' instructs the DTI server to use the GPS gpssec ToD
    as the ToD reference.

    It is recommended to reject an SNMP SET to a particular ToD
    method if such ToD capability is not active or requires
    other configuration steps.

    A successful set of this object sets to a zero length
    string all the DTI Client-Server connections that
    previously were set via dtiProtocolControlToDValue to
    particular ToD Values.

    Parsed from file DTI-MIB.my.txt
    Company: None
    Module: DTI-MIB

    Description by cisco

    Selects the type of ToD Source for the DTI server
    operation. The set of this object to its enumerated
    values is described below:

    'default' instructs the DTI server to use the last ToD
    reference as the value for its internal clock.
    'userTime' instructs the DTI server to use the value of
    dtiServerGlobalToDValue for the DTI server internal
    time ticks clock.
    'ntpv4' instructs the DTI server to use the NTP Network
    Time Protocol version 4 as the ToD reference.
    'gps' instructs the DTI server to use the GPS gpssec ToD
    as the ToD reference.

    It is recommended to reject an SNMP SET to a particular ToD
    method if such ToD capability is not active or requires
    other configuration steps.

    A successful set of this object sets to a zero length
    string all the DTI Client-Server connections that
    previously were set via dtiProtocolControlToDValue to
    particular ToD Values.

    Information by circitor

    dtiServerGlobalToDMethod OBJECT-TYPE
    SYNTAX          INTEGER  {
                        default(1),
                        userTime(2),
                        ntpv4(3),
                        gps(4)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Selects the type of ToD Source for the DTI server
        operation. The set of this object to its enumerated
        values is described below:

        'default' instructs the DTI server to use the last ToD 
                reference as the value for its internal clock.
        'userTime' instructs the DTI server to use the value of 
                dtiServerGlobalToDValue for the DTI server internal
                time ticks clock. 
        'ntpv4' instructs the DTI server to use the NTP Network 
                Time Protocol version 4 as the ToD reference.
        'gps' instructs the DTI server to use the GPS gpssec ToD
                as the ToD reference.

        It is recommended to reject an SNMP SET to a particular ToD
        method if such ToD capability is not active or requires 
        other configuration steps.

        A successful set of this object sets to a zero length 
        string all the DTI Client-Server connections that 
        previously were set via dtiProtocolControlToDValue to 
        particular ToD Values." 
    ::= { dtiServerGlobalParameters 4 }

    Information by cisco_v1

    dtiServerGlobalToDMethod OBJECT-TYPE
    SYNTAX INTEGER {
        default(1),
        userTime(2),
        ntpv4(3),
        gps(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Selects the type of ToD Source for the DTI server 
        operation. The set of this object to its enumerated 
        values is described below: 
        
        'default' instructs the DTI server to use the last ToD  
                reference as the value for its internal clock. 
        'userTime' instructs the DTI server to use the value of  
                dtiServerGlobalToDValue for the DTI server internal 
                time ticks clock.  
        'ntpv4' instructs the DTI server to use the NTP Network  
                Time Protocol version 4 as the ToD reference. 
        'gps' instructs the DTI server to use the GPS gpssec ToD 
                as the ToD reference. 
        
        It is recommended to reject an SNMP SET to a particular ToD 
        method if such ToD capability is not active or requires  
        other configuration steps. 
        
        A successful set of this object sets to a zero length  
        string all the DTI Client-Server connections that  
        previously were set via dtiProtocolControlToDValue to  
        particular ToD Values."
    ::= { dtiServerGlobalParameters 4 }

    Information by oid_info

    Vendor: Cable Television Laboratories, Inc.
    Module: DTI-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    dtiServerGlobalToDMethod OBJECT-TYPE
    SYNTAX          INTEGER  {
                        default(1),
                        userTime(2),
                        ntpv4(3),
                        gps(4)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Selects the type of ToD Source for the DTI server
        operation. The set of this object to its enumerated
        values is described below:

        'default' instructs the DTI server to use the last ToD 
                reference as the value for its internal clock.
        'userTime' instructs the DTI server to use the value of 
                dtiServerGlobalToDValue for the DTI server internal
                time ticks clock. 
        'ntpv4' instructs the DTI server to use the NTP Network 
                Time Protocol version 4 as the ToD reference.
        'gps' instructs the DTI server to use the GPS gpssec ToD
                as the ToD reference.

        It is recommended to reject an SNMP SET to a particular ToD
        method if such ToD capability is not active or requires 
        other configuration steps.

        A successful set of this object sets to a zero length 
        string all the DTI Client-Server connections that 
        previously were set via dtiProtocolControlToDValue to 
        particular ToD Values." 
    ::= { dtiServerGlobalParameters 4 }

    Information by cisco

    dtiServerGlobalToDMethod OBJECT-TYPE
    SYNTAX          INTEGER  {
                        default(1),
                        userTime(2),
                        ntpv4(3),
                        gps(4)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Selects the type of ToD Source for the DTI server
        operation. The set of this object to its enumerated
        values is described below:

        'default' instructs the DTI server to use the last ToD 
                reference as the value for its internal clock.
        'userTime' instructs the DTI server to use the value of 
                dtiServerGlobalToDValue for the DTI server internal
                time ticks clock. 
        'ntpv4' instructs the DTI server to use the NTP Network 
                Time Protocol version 4 as the ToD reference.
        'gps' instructs the DTI server to use the GPS gpssec ToD
                as the ToD reference.

        It is recommended to reject an SNMP SET to a particular ToD
        method if such ToD capability is not active or requires 
        other configuration steps.

        A successful set of this object sets to a zero length 
        string all the DTI Client-Server connections that 
        previously were set via dtiProtocolControlToDValue to 
        particular ToD Values." 
    ::= { dtiServerGlobalParameters 4 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Ralph Brown

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Maria Stachelek

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.4491.2.1.7.1.2.2.4.0 dtiServerGlobalToDMethod 0 0 None

    Brothers (4)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.4491.2.1.7.1.2.2.1 dtiServerGlobalTimeInterval 1 1 The time interval used to calculate
    dtiProtocolPerformanceDelay and
    dtiProtocolPerformanceWanderTSeconds for all Client-Server
    con…
    1.3.6.1.4.1.4491.2.1.7.1.2.2.2 dtiServerGlobalErrorRateInterval 1 1 The time interval used to calculate the value of
    dtiProtocolPerformanceFrameErrorRate for all Client-Server
    connections of the ma…
    1.3.6.1.4.1.4491.2.1.7.1.2.2.3 dtiServerGlobalJitterTimeInterval 1 1 The time interval used to calculate
    dtiProtocolPerformancePeakToPeakJitter for all
    Client-Server connections of the managed syste…
    1.3.6.1.4.1.4491.2.1.7.1.2.2.5 dtiServerGlobalToDValue 1 1 The control object to specify the ToD value for all DTI
    server Client-Server connections. The format of this object
    is DDDDD.YYYY…