Reference record for OID 1.3.6.1.4.1.4491.2.1.9


parent
1.3.6.1.4.1.4491.2.1 (clabProjDocsis)
node code
9
node name
docsDiagMib
dot oid
1.3.6.1.4.1.4491.2.1.9
type
OBJECT IDENTIFIER
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsDiagMib(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsDiagMib(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsDiagMib(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsDiagMib(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsDiagMib(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsDiagMib(9)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsDiagMib
  • /iso/identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsDiagMib
  • /iso/org/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsDiagMib
  • /iso/org/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsDiagMib
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsDiagMib
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsDiagMib
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/4491/2/1/9

    Description by circitor

    This is the MIB Module for the Diagnostic Log for
    DOCSIS-compliant Cable Modem Termination Systems (CMTS).

    The purpose of the Diagnostic Log is to prevent service
    interruptions by early detection of potential problems.
    It can also be used for fault management and for
    troubleshooting the cable network.

    The Diagnostic Log contains Cable Modems that show certain
    potential problematic behaviors, as determined by the CMTS.
    These detection criteria are defined as diagnostictriggers.

    The diagnostic trigger is an information filter to avoid
    inundating a management agent with data which is less
    meaningful as a function of size.

    There are 2 diagnostic triggers defined. Each trigger
    maintains a counter for each Cable Modem that is caught
    by that trigger.

    (1) Registration Trigger

    (2) Ranging Retry Trigger

    Copyright 1999-2007 Cable Television Laboratories, Inc.
    All rights reserved.

    Parsed from file DOCS-DIAG-MIB.mib
    Module: DOCS-DIAG-MIB

    Description by mibdepot

    This is the MIB Module for the Diagnostic Log for
    DOCSIS-compliant Cable Modem Termination Systems (CMTS).

    The purpose of the Diagnostic Log is to prevent service
    interruptions by early detection of potential problems.
    It can also be used for fault management and for
    troubleshooting the cable network.

    The Diagnostic Log contains Cable Modems that show certain
    potential problematic behaviors, as determined by the CMTS.
    These detection criteria are defined as diagnostictriggers.

    The diagnostic trigger is an information filter to avoid
    inundating a management agent with data which is less
    meaningful as a function of size.

    There are 2 diagnostic triggers defined. Each trigger
    maintains a counter for each Cable Modem that is caught
    by that trigger.

    (1) Registration Trigger

    (2) Ranging Retry Trigger

    Copyright 1999-2007 Cable Television Laboratories, Inc.
    All rights reserved.

    Parsed from file CLAB-DEF-MIB.my.txt
    Company: None
    Module: CLAB-DEF-MIB

    Description by cisco

    This is the MIB Module for the Diagnostic Log for
    DOCSIS-compliant Cable Modem Termination Systems (CMTS).

    The purpose of the Diagnostic Log is to prevent service
    interruptions by early detection of potential problems.
    It can also be used for fault management and for
    troubleshooting the cable network.

    The Diagnostic Log contains Cable Modems that show certain
    potential problematic behaviors, as determined by the CMTS.
    These detection criteria are defined as diagnostictriggers.

    The diagnostic trigger is an information filter to avoid
    inundating a management agent with data which is less
    meaningful as a function of size.

    There are 2 diagnostic triggers defined. Each trigger
    maintains a counter for each Cable Modem that is caught
    by that trigger.

    (1) Registration Trigger

    (2) Ranging Retry Trigger

    Copyright 1999-2007 Cable Television Laboratories, Inc.
    All rights reserved.

    Information by circitor

    docsDiagMib MODULE-IDENTITY LAST-UPDATED "200612070000Z" ORGANIZATION "Cable Television Laboratories, Inc." CONTACT-INFO " Postal: Cable Television Laboratories 858 Coal Creek Circle Louisville, CO 80027-9750 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 E-mail: [email protected]" DESCRIPTION "This is the MIB Module for the Diagnostic Log for DOCSIS-compliant Cable Modem Termination Systems (CMTS). The purpose of the Diagnostic Log is to prevent service interruptions by early detection of potential problems. It can also be used for fault management and for troubleshooting the cable network. The Diagnostic Log contains Cable Modems that show certain potential problematic behaviors, as determined by the CMTS. These detection criteria are defined as diagnostictriggers. The diagnostic trigger is an information filter to avoid inundating a management agent with data which is less meaningful as a function of size. There are 2 diagnostic triggers defined. Each trigger maintains a counter for each Cable Modem that is caught by that trigger. (1) Registration Trigger (2) Ranging Retry Trigger Copyright 1999-2007 Cable Television Laboratories, Inc. All rights reserved." REVISION "200612070000Z" DESCRIPTION "Initial version, published as part of the CableLabs OSSIv3.0 specification CM-SP-OSSIv3.0-I01-061207" ::= { clabProjDocsis 9 }

    Information by cisco_v1

    docsDiagMib OBJECT IDENTIFIER ::= { clabProjDocsis 9 }

    Information by oid_info

    Vendor: Cable Television Laboratories, Inc.
    Module: DOCS-DIAG-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    docsDiagMib OBJECT IDENTIFIER ::= { clabProjDocsis 9 }

    Information by cisco

    docsDiagMib MODULE-IDENTITY LAST-UPDATED "200612070000Z" ORGANIZATION "Cable Television Laboratories, Inc." CONTACT-INFO " Postal: Cable Television Laboratories 858 Coal Creek Circle Louisville, CO 80027-9750 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 E-mail: [email protected]" DESCRIPTION "This is the MIB Module for the Diagnostic Log for DOCSIS-compliant Cable Modem Termination Systems (CMTS). The purpose of the Diagnostic Log is to prevent service interruptions by early detection of potential problems. It can also be used for fault management and for troubleshooting the cable network. The Diagnostic Log contains Cable Modems that show certain potential problematic behaviors, as determined by the CMTS. These detection criteria are defined as diagnostictriggers. The diagnostic trigger is an information filter to avoid inundating a management agent with data which is less meaningful as a function of size. There are 2 diagnostic triggers defined. Each trigger maintains a counter for each Cable Modem that is caught by that trigger. (1) Registration Trigger (2) Ranging Retry Trigger Copyright 1999-2007 Cable Television Laboratories, Inc. All rights reserved." REVISION "200612070000Z" DESCRIPTION "Initial version, published as part of the CableLabs OSSIv3.0 specification CM-SP-OSSIv3.0-I01-061207" ::= { clabProjDocsis 9 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Ralph Brown

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Maria Stachelek

    Children (3)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.4491.2.1.9.0 docsDiagLogNotifications 3 3 None
    1.3.6.1.4.1.4491.2.1.9.1 docsDiagLogMibObjects 4 50 None
    1.3.6.1.4.1.4491.2.1.9.2 docsDiagLogConformance 2 5 None

    Brothers (23)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.4491.2.1.1 dsgMIB 0 0 None
    1.3.6.1.4.1.4491.2.1.2 docsLoadBalMib, docsLoadBalanceMib 3 86 This is the MIB Module for the load balancing.
    Load balancing is manageable on a per-CM basis.
    Each CM is assigned:
    a) to a set of…
    1.3.6.1.4.1.4491.2.1.3 dsgIfMIB 4 86 This is the MIB Module for the DOCSIS Set-top Gateway
    (DSG). The DSG provides a one-way IP datagram transport
    for Out-Of-Band (OO…
    1.3.6.1.4.1.4491.2.1.4 dsgIfStdMib 3 44 None
    1.3.6.1.4.1.4491.2.1.5 docsIfExt2Mib 3 39 This MIB module contains the management objects that enhance
    DOCSIS 2.0 feature set.
    It includes SCDMA capability of limiting the…
    1.3.6.1.4.1.4491.2.1.6 docsIfMCmtsMib 3 163 This MIB module contains the management objects for the
    configuration and management of the External PHY interface
    (DEPI) of the …
    1.3.6.1.4.1.4491.2.1.7 dtiMib 3 80 This MIB module provides the management objects necessary
    to configure and manage the DOCSIS Timing Interface
    devices.
    1.3.6.1.4.1.4491.2.1.8 docsL2vpnMIB 3 72 This is the management MIB for devices complying to the
    DOCSIS L2VPN Feature.
    1.3.6.1.4.1.4491.2.1.10 docsSubmgt3Mib 2 96 This MIB module contains the management objects for the
    CMTS control of the IP4 and IPv6 traffic with origin and
    destination to C…
    1.3.6.1.4.1.4491.2.1.11 docsSecMib 2 60 This MIB module contains the management objects for
    the management of the security requirements in the DOCSIS
    Security Specificat…
    1.3.6.1.4.1.4491.2.1.12 docsTestMIB 2 18 This is the MIB Module supporting programmable test features
    for DOCSIS 2.0 compliant Cable Modems (CM) and Cable Modem
    Terminati…
    1.3.6.1.4.1.4491.2.1.13 sledMib 4 21 This MIB module provides the management objects necessary
    to configure and invoke the Software Loopback Application
    for eDOCSIS (…
    1.3.6.1.4.1.4491.2.1.14 esafeMib 2 30 This MIB module provides the management objects necessary
    to configure functionality of eSAFE components of a device
    implementing…
    1.3.6.1.4.1.4491.2.1.15 teaPwMIB 3 124 CL-PW-MIB
    1.3.6.1.4.1.4491.2.1.16 teaPwTDMMIB 3 123 CL-PW-TDM-MIB
    1.3.6.1.4.1.4491.2.1.17 teaPwTcMIB 0 0 None
    1.3.6.1.4.1.4491.2.1.18 docsMcastMib 2 64 This MIB module contains the management objects for the
    management of Multicast over DOCSIS to support Multicast
    DSID forwarding …
    1.3.6.1.4.1.4491.2.1.19 docsMcastAuthMib 2 48 This MIB module contains the management objects for the
    management of the CMTS Multicast Authorization Module.
    Copyright 1999-200…
    1.3.6.1.4.1.4491.2.1.20 docsIf3Mib 3 227 This MIB module contains the management objects for the
    management of DOCSIS 3.0 features, primarly channel bonding,
    interface to…
    1.3.6.1.4.1.4491.2.1.21 docsQos3Mib 2 271 This MIB module contains the management objects for the
    management of QOS for channel bonding.
    1.3.6.1.4.1.4491.2.1.22 docsLoadbal3Mib 2 118 This MIB module contains the management objects
    for the DOCSIS 3.0 CMTS Load Balanding operation.
    Copyright 1999-2006 Cable Telev…
    1.3.6.1.4.1.4491.2.1.23 docsDrfMib 3 42 This MIB module contains the management objects for the
    management of the Downstream RF Interface specification.
    Copyright 1999-2…
    1.3.6.1.4.1.4491.2.1.1317 sledMib 4 21 sledMib MODULE-IDENTITY
    LAST-UPDATED "200411240000Z" -- November 24, 2004
    ORGANIZATION "CableLabs eDOCSIS Working Group"
    CONTAC…