This object specifies the ID of the guest VLAN for this port.
Access to the guest VLAN is allowed for MAC addresses before EAP
authentication has been performed.
If the value of this object is 0, then the global guest VLAN ID
is used for this port, as specified in bseeGuestVlanId.
However, if the value of the associated instance of
bseePortConfigGuestVlanEnabled is false(2), then access to the
guest VLAN is not allowed for the port, regardless of the value
of bseePortConfigGuestVlanId.
Parsed from file bsee001.mib.txt
Company: baynetworks
Module: BAY-STACK-EAPOL-EXTENSION-MIB
Vendor: Avaya
Module: BAY-STACK-EAPOL-EXTENSION-MIB (BAY-STACK-EAPOL-EXTENSION-MIB.mib)
Type: TABULAR
Access: read-write
Syntax: VlanIdOrNone
Automatically extracted from www.mibdepot.com
bseePortConfigGuestVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the ID of the guest VLAN for this port. Access to the guest VLAN is allowed for MAC addresses before EAP authentication has been performed. If the value of this object is 0, then the global guest VLAN ID is used for this port, as specified in bseeGuestVlanId. However, if the value of the associated instance of bseePortConfigGuestVlanEnabled is false(2), then access to the guest VLAN is not allowed for the port, regardless of the value of bseePortConfigGuestVlanId." DEFVAL { 0 } ::= { bseePortConfigEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.5.3.3.1.1 | bseePortConfigPortNumber | 0 | 0 | The Port number associated with this Port. |
| 1.3.6.1.4.1.45.5.3.3.1.3 | bseePortConfigMultiHostEnabled | 0 | 0 | This object controls whether EAP multihost is enabled for a port. |
| 1.3.6.1.4.1.45.5.3.3.1.4 | bseePortConfigMultiHostEapMaxNumMacs | 0 | 0 | This object specifies the maximum number of EAP-authentication MAC addresses allowed on this port. A value of 0 indicates that t… |
| 1.3.6.1.4.1.45.5.3.3.1.5 | bseePortConfigMultiHostAllowNonEapClient | 0 | 0 | This object controls whether non-EAP clients (MAC addresses) are allowed on the port. |
| 1.3.6.1.4.1.45.5.3.3.1.6 | bseePortConfigMultiHostNonEapMacSource | 0 | 0 | This object controls the source for finding allowed non-EAP MAC addresses. |
| 1.3.6.1.4.1.45.5.3.3.1.7 | bseePortConfigMultiHostNonEapMaxNumMacs | 0 | 0 | This object specifies the maximum number of non-EAP authenticated MAC addresses allowed on this port. |
| 1.3.6.1.4.1.45.5.3.3.1.8 | bseePortConfigGuestVlanEnabled | 0 | 0 | This object controls whether access to the guest VLAN is allowed for a port. |
| 1.3.6.1.4.1.45.5.3.3.1.9 | bseePortConfigMultiHostRadiusAuthNonEapClient | 0 | 0 | This object controls whether non-EAP clients (MAC addresses) may authenticated using RADIUS on the port. |
| 1.3.6.1.4.1.45.5.3.3.1.10 | bseePortConfigMultiHostSingleAuthEnabled | 0 | 0 | This object controls whether non-EAP clients (MAC addresses) may be automatically authenticated on the port after an EAP client … |
| 1.3.6.1.4.1.45.5.3.3.1.11 | bseePortConfigMultiHostAllowNonEapPhones | 0 | 0 | This object indicates whether IP phones will be allowed access based on DHCP. |
| 1.3.6.1.4.1.45.5.3.3.1.12 | bseePortConfigMultiHostAllowRadiusAssignedVlan | 0 | 0 | This object indicates whether to allow the use of RADIUS-assigned VLANs in multihost-eap mode. |
| 1.3.6.1.4.1.45.5.3.3.1.13 | bseePortConfigMultiHostEapPacketMode | 0 | 0 | This object indicates whether to use unicast or multicast packets for Eap-ReqId packets. Normally, multicast packets are used. |
| 1.3.6.1.4.1.45.5.3.3.1.14 | bseePortConfigMultiHostEapRadiusTimeoutMode | 0 | 0 | This object indicates whether or not to fail authentication of EAP users on a RADIUS timeout. |
| 1.3.6.1.4.1.45.5.3.3.1.15 | bseePortConfigMultiHostAllowNonEapRadiusAssignedVlan | 0 | 0 | This object indicates whether to allow the use of RADIUS-assigned VLANs in multihost-eap mode for non-EAP clients. |
| 1.3.6.1.4.1.45.5.3.3.1.16 | bseePortConfigProcessRadiusRequestsServerPackets | 0 | 0 | This object indicates whether to process any RADIUS requests-server packets that are received on this port. |
| 1.3.6.1.4.1.45.5.3.3.1.17 | bseePortConfigEapProtocolEnabled | 0 | 0 | This object controls whether EAP protocol packets are processed on this port. |
| 1.3.6.1.4.1.45.5.3.3.1.18 | bseePortConfigMultiHostUseMostRecentRadiusAssignedVlan | 0 | 0 | Controls whether to use most recent RADIUS-assigned VLAN. |