OID reference
1.3.6.1.4.1.4515.1.6.1.1.1.9
This object applies only for trunk ports. It specifies if the packets should be compressed. 0 - Means no POS compression, 1 - Means POS compression with CRC-32. 2 - Means POS compression with CRC-16. Note that the two connected trunks should be configured to the same value. Note also that the BW calculation of the OC-…
Identification
{1 3 6 1 4 1 4515 1 6 1 1 1 9}
| Value | Name |
|---|---|
| 0 | uncompress |
| 1 | posCompress32 |
| 2 | posCompress16 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4515.1.6.1.1.1.9
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
slSonetCompression OBJECT-TYPE
SYNTAX INTEGER {
uncompress(0),
posCompress32(1),
posCompress16(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object applies only for trunk ports.
It specifies if the packets should be compressed.
0 - Means no POS compression,
1 - Means POS compression with CRC-32.
2 - Means POS compression with CRC-16.
Note that the two connected trunks should be configured
to the same value.
Note also that the BW calculation of the OC-n should
be changed according to this value."
::= { slSonetConfigEntry 9 }slSonetCompression OBJECT-TYPE
SYNTAX INTEGER {
uncompress(0),
posCompress32(1),
posCompress16(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object applies only for trunk ports.
It specifies if the packets should be compressed.
0 - Means no POS compression,
1 - Means POS compression with CRC-32.
2 - Means POS compression with CRC-16.
Note that the two connected trunks should be configured
to the same value.
Note also that the BW calculation of the OC-n should
be changed according to this value."
::= { slSonetConfigEntry 9 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object applies only for trunk ports. It specifies if the packets should be compressed. 0 - Means no POS compression, 1 - Means POS compression with CRC-32. 2 - Means POS compression with CRC-16. Note that the two connected trunks should be configured to the same value. Note also that the BW calculation of the OC-n should be changed according to this value.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: slSonetCompression
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"slSonetCompression",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"uncompress",
"(",
"0",
")",
",",
"posCompress32",
"(",
"1",
")",
",",
"posCompress16",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object applies only for trunk ports. It specifies if the packets should be compressed. 0 - Means no POS compression, 1 - Means POS compression with CRC-32. 2 - Means POS compression with CRC-16. Note that the two connected trunks should be configured to the same value. Note also that the BW calculation of the OC-n should be changed according to this value.\"",
"::=",
"{",
"slSonetConfigEntry",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"uncompress",
0
],
[
"posCompress32",
1
],
[
"posCompress16",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object applies only for trunk ports. It specifies if the packets should be compressed. 0 - Means no POS compression, 1 - Means POS compression with CRC-32. 2 - Means POS compression with CRC-16. Note that the two connected trunks should be configured to the same value. Note also that the BW calculation of the OC-n should be changed according to this value."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: SL-SONET-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'SL-NE-MIB': ['sitelight'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Counter64', 'Gauge32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the Observium Community archive.
Module: SL-SONET-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'SL-NE-MIB': ['sitelight'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Counter64', 'Gauge32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.6.1.1.1.1 | slSonetConfigFrameScramble | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.2 | slSonetConfigType | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.3 | slSonetConfigDccSelection | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.4 | slSonetResetAllCounters | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.5 | slSonetPortThresholdTrapEnable | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.6 | slSonetConfigSdThreshold | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.7 | slSonetConfigSfThreshold | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.10 | slSonetOverheadTunneling | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.11 | slSonetLopBitmask | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.12 | slSonetTdmTrunk | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.13 | slSonetFsApply | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.14 | slSonetTxLte | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.15 | slSonetReceivedLte | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.16 | slSonetResetPmThreshold | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.17 | slSonetResetAlsParams | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.18 | slSonetTransceiverType | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.6.1.1.1.19 | slSonetTransceiverMedia | 0 | 0 |