Description 1
The total number of Rx Mbuffers used.
OID reference
1.3.6.1.4.1.4526.10.1.1.4.3
The total number of Rx Mbuffers used.
Identification
{1 3 6 1 4 1 4526 10 1 1 4 3}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.4526.10.1.1.4.3.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 5 distinct definitions; some records may not include a definition.
agentSwitchCpuMBufRxUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The total number of Rx Mbuffers used."
::= { agentSwitchCpuMBufGroup 3 }agentSwitchCpuProcessRisingThreshold OBJECT-TYPE
SYNTAX Unsigned32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPU Rising utilization threshold in percentage. A zero percent
threshold indicates CPU Utilization Notification feature is disabled.
A notification is triggered when the total CPU utilization exceeds this
threshold over the configured Rising threshold interval.
If the Rising threshold is configured to be less than the Falling threshold,
the Falling threshold is set equal to the Rising threshold."
DEFVAL { 0 }
::= { agentSwitchCpuProcessGroup 3 }agentSwitchCpuProcessRisingThreshold OBJECT-TYPE
SYNTAX Unsigned32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPU Rising utilization threshold in percentage. A zero percent
threshold indicates CPU Utilization Notification feature is disabled.
A notification is triggered when the total CPU utilization exceeds this
threshold over the configured Rising threshold interval.
If the Rising threshold is configured to be less than the Falling threshold,
the Falling threshold is set equal to the Rising threshold."
DEFVAL { 0 }
::= { agentSwitchCpuProcessGroup 3 }agentSwitchCpuProcessRisingThreshold OBJECT-TYPE
SYNTAX Unsigned32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPU Rising utilization threshold in percentage. A zero percent
threshold indicates CPU Utilization Notification feature is disabled.
A notification is triggered when the total CPU utilization exceeds this
threshold over the configured Rising threshold interval.
If the Rising threshold is configured to be less than the Falling threshold,
the Falling threshold is set equal to the Rising threshold."
DEFVAL { 0 }
::= { agentSwitchCpuProcessGroup 3 }agentSwitchCpuProcessRisingThreshold OBJECT-TYPE
SYNTAX Unsigned32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPU Rising utilization threshold in percentage. A zero percent
threshold indicates CPU Utilization Notification feature is disabled.
A notification is triggered when the total CPU utilization exceeds this
threshold over the configured Rising threshold interval.
If the Rising threshold is configured to be less than the Falling threshold,
the Falling threshold is set equal to the Rising threshold."
DEFVAL { 0 }
::= { agentSwitchCpuProcessGroup 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The total number of Rx Mbuffers used.
Description 2
The CPU Rising utilization threshold in percentage. A zero percent threshold indicates CPU Utilization Notification feature is disabled. A notification is triggered when the total CPU utilization exceeds this threshold over the configured Rising threshold interval. If the Rising threshold is configured to be less than the Falling threshold, the Falling threshold is set equal to the Rising threshold.
NETGEAR official product and EOL MIB downloadsNETGEAR MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentSwitchCpuMBufRxUsed
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentSwitchCpuMBufRxUsed",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\" The total number of Rx Mbuffers used.\"",
"::=",
"{",
"agentSwitchCpuMBufGroup",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The total number of Rx Mbuffers used."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: FASTPATH-SWITCHING-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'BROADCOM-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Status in source: current.
Names: agentSwitchCpuProcessRisingThreshold
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentSwitchCpuProcessRisingThreshold",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"100",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The CPU Rising utilization threshold in percentage. A zero percent threshold indicates CPU Utilization Notification feature is disabled. A notification is triggered when the total CPU utilization exceeds this threshold over the configured Rising threshold interval. If the Rising threshold is configured to be less than the Falling threshold, the Falling threshold is set equal to the Rising threshold.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"agentSwitchCpuProcessGroup",
"3",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
100
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The CPU Rising utilization threshold in percentage. A zero percent threshold indicates CPU Utilization Notification feature is disabled. A notification is triggered when the total CPU utilization exceeds this threshold over the configured Rising threshold interval. If the Rising threshold is configured to be less than the Falling threshold, the Falling threshold is set equal to the Rising threshold."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in m4100v10.0.2.30-mibs.zip.
Same file in m4100v10.0.2.26-mibs.zip.
Same file in m4100v10.0.2.20-mibs.zip.
Same file in M4100_mibs-v10.0.2.13.zip.
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in m4100v10.0.2.35-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.2.9-mibs.zip.
Same file in m4200v12.0.2.20-mibs.zip.
Same file in m4200v12.0.2.12-mibs.zip.
Same file in m4200v12.0.2.10-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.0.19-mibs.zip.
Same file in m4200-mibs-v12.0.0.15.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.2.40-mibs.zip.
Same file in m4200v12.0.2.36-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.14-mibs.zip.
Same file in M4250H-v13.0.4.13-mibs.zip.
Same file in M4250L-v13.0.4.14-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.19-mibs.zip.
Same file in M4250H-v13.0.4.17-mibs.zip.
Same file in M4250L-v13.0.4.19-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.26-mibs.zip.
Same file in M4250H-v13.0.4.23-mibs.zip.
Same file in M4250L-v13.0.4.26-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.5.10-mibs.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.1.1.4.1 | agentSwitchCpuProcessMemFree, agentSwitchCpuMBufSize | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.2 | agentSwitchCpuProcessMemAvailable, agentSwitchCpuMBufFree | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.4 | agentSwitchCpuProcessRisingThresholdInterval, agentSwitchCpuMBufRxNormAllocAttempts | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.5 | agentSwitchCpuProcessFallingThreshold, agentSwitchCpuMBufRxNormAllocFailures | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.6 | agentSwitchCpuProcessFallingThresholdInterval, agentSwitchCpuMBufRxMid2AllocAttempts | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.7 | agentSwitchCpuProcessFreeMemoryThreshold, agentSwitchCpuMBufRxMid2AllocFailures | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.8 | agentSwitchCpuProcessTable, agentSwitchCpuMBufRxMid1AllocAttempts | 1 | 5 | |
| 1.3.6.1.4.1.4526.10.1.1.4.9 | agentSwitchCpuProcessTotalUtilization, agentSwitchCpuMBufRxMid1AllocFailures | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.10 | agentSwitchCpuProcessMemFreePercentage, agentSwitchCpuMBufRxHighAllocAttempts | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.11 | agentSwitchCpuProcessTotalUtilizationPercentage5sec, agentSwitchCpuMBufRxHighAllocFailures | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.12 | agentSwitchCpuProcessTotalUtilizationPercentage60sec, agentSwitchCpuMBufTxAllocAttempts | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.13 | agentSwitchCpuProcessTotalUtilizationPercentage300sec, agentSwitchCpuMBufTxAllocFailures | 0 | 0 |