Description 1
The total number of Rx Mbuffers allocations failed used with normal prioriry.
OID reference
1.3.6.1.4.1.4526.10.1.1.4.5
The total number of Rx Mbuffers allocations failed used with normal prioriry.
Identification
{1 3 6 1 4 1 4526 10 1 1 4 5}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.4526.10.1.1.4.5.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 5 distinct definitions; some records may not include a definition.
agentSwitchCpuMBufRxNormAllocFailures OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The total number of Rx Mbuffers allocations failed used with normal prioriry."
::= { agentSwitchCpuMBufGroup 5 }agentSwitchCpuProcessFallingThreshold OBJECT-TYPE
SYNTAX Unsigned32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPU Falling utilization threshold in percentage. Configuration of this
object value is optional. Value '0' is not allowed for configuration,
if the Rising threshold is non-zero. If the Falling threshold is configured
to be greater than the Rising threshold, the Rising threshold is set equal
to the Falling threshold. If the Falling threshold is not configured,
it takes the same value as the Rising threshold.
A notification is triggered when the total CPU utilization
falls below this threshold over the configured Falling threshold interval."
DEFVAL { 0 }
::= { agentSwitchCpuProcessGroup 5 }agentSwitchCpuProcessFallingThreshold OBJECT-TYPE
SYNTAX Unsigned32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPU Falling utilization threshold in percentage. Configuration of this
object value is optional. Value '0' is not allowed for configuration,
if the Rising threshold is non-zero. If the Falling threshold is configured
to be greater than the Rising threshold, the Rising threshold is set equal
to the Falling threshold. If the Falling threshold is not configured,
it takes the same value as the Rising threshold.
A notification is triggered when the total CPU utilization
falls below this threshold over the configured Falling threshold interval."
DEFVAL { 0 }
::= { agentSwitchCpuProcessGroup 5 }agentSwitchCpuProcessFallingThreshold OBJECT-TYPE
SYNTAX Unsigned32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPU Falling utilization threshold in percentage. Configuration of this
object value is optional. Value '0' is not allowed for configuration,
if the Rising threshold is non-zero. If the Falling threshold is configured
to be greater than the Rising threshold, the Rising threshold is set equal
to the Falling threshold. If the Falling threshold is not configured,
it takes the same value as the Rising threshold.
A notification is triggered when the total CPU utilization
falls below this threshold over the configured Falling threshold interval."
DEFVAL { 0 }
::= { agentSwitchCpuProcessGroup 5 }agentSwitchCpuProcessFallingThreshold OBJECT-TYPE
SYNTAX Unsigned32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPU Falling utilization threshold in percentage. Configuration of this
object value is optional. Value '0' is not allowed for configuration,
if the Rising threshold is non-zero. If the Falling threshold is configured
to be greater than the Rising threshold, the Rising threshold is set equal
to the Falling threshold. If the Falling threshold is not configured,
it takes the same value as the Rising threshold.
A notification is triggered when the total CPU utilization
falls below this threshold over the configured Falling threshold interval."
DEFVAL { 0 }
::= { agentSwitchCpuProcessGroup 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The total number of Rx Mbuffers allocations failed used with normal prioriry.
Description 2
The CPU Falling utilization threshold in percentage. Configuration of this object value is optional. Value '0' is not allowed for configuration, if the Rising threshold is non-zero. If the Falling threshold is configured to be greater than the Rising threshold, the Rising threshold is set equal to the Falling threshold. If the Falling threshold is not configured, it takes the same value as the Rising threshold. A notification is triggered when the total CPU utilization falls below this threshold over the configured Falling threshold interval.
NETGEAR official product and EOL MIB downloadsNETGEAR MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentSwitchCpuMBufRxNormAllocFailures
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentSwitchCpuMBufRxNormAllocFailures",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\" The total number of Rx Mbuffers allocations failed used with normal prioriry.\"",
"::=",
"{",
"agentSwitchCpuMBufGroup",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The total number of Rx Mbuffers allocations failed used with normal prioriry."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: FASTPATH-SWITCHING-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'BROADCOM-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Status in source: current.
Names: agentSwitchCpuProcessFallingThreshold
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentSwitchCpuProcessFallingThreshold",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"100",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The CPU Falling utilization threshold in percentage. Configuration of this object value is optional. Value '0' is not allowed for configuration, if the Rising threshold is non-zero. If the Falling threshold is configured to be greater than the Rising threshold, the Rising threshold is set equal to the Falling threshold. If the Falling threshold is not configured, it takes the same value as the Rising threshold. A notification is triggered when the total CPU utilization falls below this threshold over the configured Falling threshold interval.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"agentSwitchCpuProcessGroup",
"5",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
100
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The CPU Falling utilization threshold in percentage. Configuration of this object value is optional. Value '0' is not allowed for configuration, if the Rising threshold is non-zero. If the Falling threshold is configured to be greater than the Rising threshold, the Rising threshold is set equal to the Falling threshold. If the Falling threshold is not configured, it takes the same value as the Rising threshold. A notification is triggered when the total CPU utilization falls below this threshold over the configured Falling threshold interval."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in m4100v10.0.2.30-mibs.zip.
Same file in m4100v10.0.2.26-mibs.zip.
Same file in m4100v10.0.2.20-mibs.zip.
Same file in M4100_mibs-v10.0.2.13.zip.
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in m4100v10.0.2.35-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.2.9-mibs.zip.
Same file in m4200v12.0.2.20-mibs.zip.
Same file in m4200v12.0.2.12-mibs.zip.
Same file in m4200v12.0.2.10-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.0.19-mibs.zip.
Same file in m4200-mibs-v12.0.0.15.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.2.40-mibs.zip.
Same file in m4200v12.0.2.36-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.14-mibs.zip.
Same file in M4250H-v13.0.4.13-mibs.zip.
Same file in M4250L-v13.0.4.14-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.19-mibs.zip.
Same file in M4250H-v13.0.4.17-mibs.zip.
Same file in M4250L-v13.0.4.19-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.26-mibs.zip.
Same file in M4250H-v13.0.4.23-mibs.zip.
Same file in M4250L-v13.0.4.26-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.5.10-mibs.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.1.1.4.1 | agentSwitchCpuProcessMemFree, agentSwitchCpuMBufSize | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.2 | agentSwitchCpuProcessMemAvailable, agentSwitchCpuMBufFree | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.3 | agentSwitchCpuProcessRisingThreshold, agentSwitchCpuMBufRxUsed | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.4 | agentSwitchCpuProcessRisingThresholdInterval, agentSwitchCpuMBufRxNormAllocAttempts | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.6 | agentSwitchCpuProcessFallingThresholdInterval, agentSwitchCpuMBufRxMid2AllocAttempts | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.7 | agentSwitchCpuProcessFreeMemoryThreshold, agentSwitchCpuMBufRxMid2AllocFailures | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.8 | agentSwitchCpuProcessTable, agentSwitchCpuMBufRxMid1AllocAttempts | 1 | 5 | |
| 1.3.6.1.4.1.4526.10.1.1.4.9 | agentSwitchCpuProcessTotalUtilization, agentSwitchCpuMBufRxMid1AllocFailures | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.10 | agentSwitchCpuProcessMemFreePercentage, agentSwitchCpuMBufRxHighAllocAttempts | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.11 | agentSwitchCpuProcessTotalUtilizationPercentage5sec, agentSwitchCpuMBufRxHighAllocFailures | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.12 | agentSwitchCpuProcessTotalUtilizationPercentage60sec, agentSwitchCpuMBufTxAllocAttempts | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.1.4.13 | agentSwitchCpuProcessTotalUtilizationPercentage300sec, agentSwitchCpuMBufTxAllocFailures | 0 | 0 |