OID reference
1.3.6.1.4.1.4526.10.1.2.8.29.1
Mode changes are effective from the next reload of the Switch. The cut-through feature may not be present on all switches. Use - agentSwitchCutThroughRunningModeStatus - MIB to check if the feature is present on your switch.
Identification
{1 3 6 1 4 1 4526 10 1 2 8 29 1}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enable | 1 |
| 2 | disable | 1 |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 5 distinct definitions; some records may not include a definition.
agentSwitchCutThroughConfigMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mode changes are effective from the next reload of the Switch.
The cut-through feature may not be present on all switches. Use
- agentSwitchCutThroughRunningModeStatus - MIB to check if the feature is
present on your switch."
::= { agentSwitchCutThroughGroup 1 }agentSwitchCutThroughConfigMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mode changes are effective from the next reload of the Switch.
The cut-through feature may not be present on all switches. Use
- agentSwitchCutThroughRunningModeStatus - MIB to check if the feature is
present on your switch."
::= { agentSwitchCutThroughGroup 1 }agentSwitchCutThroughConfigMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mode changes are effective from the next reload of the Switch.
The cut-through feature may not be present on all switches. Use
- agentSwitchCutThroughRunningModeStatus - MIB to check if the feature is
present on your switch."
::= { agentSwitchCutThroughGroup 1 }agentSwitchCutThroughConfigMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mode changes are effective from the next reload of the Switch.
The cut-through feature may not be present on all switches. Use
- agentSwitchCutThroughRunningModeStatus - MIB to check if the feature is
present on your switch."
::= { agentSwitchCutThroughGroup 1 }agentSwitchPrivateGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchPrivateGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's private group mapping table"
::= { agentSwitchPrivateGroupConfigGroup 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Mode changes are effective from the next reload of the Switch. The cut-through feature may not be present on all switches. Use - agentSwitchCutThroughRunningModeStatus - MIB to check if the feature is present on your switch.
NETGEAR official product and EOL MIB downloadsNETGEAR MIB copies (LibreNMS/Observium Community)
Description 2
The switch's private group mapping table
NETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentSwitchCutThroughConfigMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentSwitchCutThroughConfigMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Mode changes are effective from the next reload of the Switch. The cut-through feature may not be present on all switches. Use - agentSwitchCutThroughRunningModeStatus - MIB to check if the feature is present on your switch.\"",
"::=",
"{",
"agentSwitchCutThroughGroup",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Mode changes are effective from the next reload of the Switch. The cut-through feature may not be present on all switches. Use - agentSwitchCutThroughRunningModeStatus - MIB to check if the feature is present on your switch."
],
null,
null,
null,
null
]
}Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in m4100v10.0.2.30-mibs.zip.
Same file in m4100v10.0.2.26-mibs.zip.
Same file in m4100v10.0.2.20-mibs.zip.
Same file in M4100_mibs-v10.0.2.13.zip.
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in m4100v10.0.2.35-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.2.9-mibs.zip.
Same file in m4200v12.0.2.20-mibs.zip.
Same file in m4200v12.0.2.12-mibs.zip.
Same file in m4200v12.0.2.10-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.0.19-mibs.zip.
Same file in m4200-mibs-v12.0.0.15.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.2.40-mibs.zip.
Same file in m4200v12.0.2.36-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.14-mibs.zip.
Same file in M4250H-v13.0.4.13-mibs.zip.
Same file in M4250L-v13.0.4.14-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.19-mibs.zip.
Same file in M4250H-v13.0.4.17-mibs.zip.
Same file in M4250L-v13.0.4.19-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.26-mibs.zip.
Same file in M4250H-v13.0.4.23-mibs.zip.
Same file in M4250L-v13.0.4.26-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.5.10-mibs.zip.
Status in source: current.
Names: agentSwitchPrivateGroupTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentSwitchPrivateGroupTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"AgentSwitchPrivateGroupEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"The switch's private group mapping table\"",
"::=",
"{",
"agentSwitchPrivateGroupConfigGroup",
"1",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"AgentSwitchPrivateGroupEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The switch's private group mapping table"
],
null,
null,
null,
null
]
}Module: FASTPATH-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'BROADCOM-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Module: FASTPATH-SWITCHING-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'BROADCOM-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.1.2.8.29.1.1 | agentSwitchPrivateGroupEntry | 4 | 4 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.1.2.8.29.2 | agentSwitchPrivateGroupPortTable, agentSwitchCutThroughRunningModeStatus | 1 | 4 | |
| 1.3.6.1.4.1.4526.10.1.2.8.29.3 | agentSwitchCutThroughConfiguredModeStatus | 0 | 0 |