Description 1
The switch's private group portlist mapping table
Sources for this description
NETGEAR official product and EOL MIB downloads
OID reference
1.3.6.1.4.1.4526.10.1.2.8.29.2
The switch's private group portlist mapping table
Identification
{1 3 6 1 4 1 4526 10 1 2 8 29 2}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enabled | 2 |
| 2 | disabled | 2 |
| 3 | not-supported | 2 |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 3 distinct definitions; some records may not include a definition.
agentSwitchPrivateGroupPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchPrivateGroupPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's private group portlist mapping table"
::= { agentSwitchPrivateGroupConfigGroup 2 }agentSwitchCutThroughRunningModeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
not-supported(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This gives the current running mode of the cut-through feature on switch.
Note that Mode changes are effective from the next reload of the Switch.
so running mode may be different than the configured mode.
A value of not-supported(3) means that the feature is not present on the
switch."
::= { agentSwitchCutThroughGroup 2 }agentSwitchCutThroughRunningModeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
not-supported(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This gives the current running mode of the cut-through feature on switch.
Note that Mode changes are effective from the next reload of the Switch.
so running mode may be different than the configured mode.
A value of not-supported(3) means that the feature is not present on the
switch."
::= { agentSwitchCutThroughGroup 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The switch's private group portlist mapping table
NETGEAR official product and EOL MIB downloads
Description 2
This gives the current running mode of the cut-through feature on switch. Note that Mode changes are effective from the next reload of the Switch. so running mode may be different than the configured mode. A value of not-supported(3) means that the feature is not present on the switch.
NETGEAR official product and EOL MIB downloadsNETGEAR MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentSwitchPrivateGroupPortTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentSwitchPrivateGroupPortTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"AgentSwitchPrivateGroupPortEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"The switch's private group portlist mapping table\"",
"::=",
"{",
"agentSwitchPrivateGroupConfigGroup",
"2",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"AgentSwitchPrivateGroupPortEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The switch's private group portlist mapping table"
],
null,
null,
null,
null
]
}Module: FASTPATH-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'BROADCOM-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Module: FASTPATH-SWITCHING-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'BROADCOM-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Status in source: current.
Names: agentSwitchCutThroughRunningModeStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentSwitchCutThroughRunningModeStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
",",
"not-supported",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This gives the current running mode of the cut-through feature on switch. Note that Mode changes are effective from the next reload of the Switch. so running mode may be different than the configured mode. A value of not-supported(3) means that the feature is not present on the switch.\"",
"::=",
"{",
"agentSwitchCutThroughGroup",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
],
[
"not-supported",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This gives the current running mode of the cut-through feature on switch. Note that Mode changes are effective from the next reload of the Switch. so running mode may be different than the configured mode. A value of not-supported(3) means that the feature is not present on the switch."
],
null,
null,
null,
null
]
}Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in m4100v10.0.2.30-mibs.zip.
Same file in m4100v10.0.2.26-mibs.zip.
Same file in m4100v10.0.2.20-mibs.zip.
Same file in M4100_mibs-v10.0.2.13.zip.
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in m4100v10.0.2.35-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.2.9-mibs.zip.
Same file in m4200v12.0.2.20-mibs.zip.
Same file in m4200v12.0.2.12-mibs.zip.
Same file in m4200v12.0.2.10-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.0.19-mibs.zip.
Same file in m4200-mibs-v12.0.0.15.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.2.40-mibs.zip.
Same file in m4200v12.0.2.36-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.14-mibs.zip.
Same file in M4250H-v13.0.4.13-mibs.zip.
Same file in M4250L-v13.0.4.14-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.19-mibs.zip.
Same file in M4250H-v13.0.4.17-mibs.zip.
Same file in M4250L-v13.0.4.19-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.26-mibs.zip.
Same file in M4250H-v13.0.4.23-mibs.zip.
Same file in M4250L-v13.0.4.26-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.5.10-mibs.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.1.2.8.29.2.1 | agentSwitchPrivateGroupPortEntry | 3 | 3 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.1.2.8.29.1 | agentSwitchPrivateGroupTable, agentSwitchCutThroughConfigMode | 1 | 5 | |
| 1.3.6.1.4.1.4526.10.1.2.8.29.3 | agentSwitchCutThroughConfiguredModeStatus | 0 | 0 |