The maximum value that the layer-4 destination port number in the
packet must have in order to match this classifier entry.
This value must be equal to or greater than the value specified
for this entry in agentDiffServAuxMfClfrDstL4PortMin.
Parsed from file NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB.mib
Module: NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB
Vendor: Netgear
Module: NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB
[Automatically extracted from oidview.com]
agentDiffServAuxMfClfrDstL4PortMax OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in agentDiffServAuxMfClfrDstL4PortMin. " DEFVAL { 65535 } ::= { agentDiffServAuxMfClfrEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.1 | agentDiffServAuxMfClfrId | 0 | 0 | An index that enumerates the Auxiliary MultiField Classifier filter entries. Managers obtain new values for row creation in thi… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.2 | agentDiffServAuxMfClfrDstAddr | 0 | 0 | The IP address to match against the packet's destination IP address. |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.3 | agentDiffServAuxMfClfrDstMask | 0 | 0 | This mask value identifies the portion of agentDiffServAuxMfClfrDstAddr that is compared against a packet. A non-contiguous mask … |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.4 | agentDiffServAuxMfClfrSrcAddr | 0 | 0 | The IP address to match against the packet's source IP address. |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.5 | agentDiffServAuxMfClfrSrcMask | 0 | 0 | This mask value identifies the portion of agentDiffServAuxMfClfrSrcAddr that is compared against a packet. A non-contiguous mask … |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.6 | agentDiffServAuxMfClfrProtocol | 0 | 0 | The IP protocol to match against the IPv4 protocol number. A value of 255 means match all. |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.7 | agentDiffServAuxMfClfrDstL4PortMin | 0 | 0 | The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.9 | agentDiffServAuxMfClfrSrcL4PortMin | 0 | 0 | The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.10 | agentDiffServAuxMfClfrSrcL4PortMax | 0 | 0 | The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.11 | agentDiffServAuxMfClfrCos | 0 | 0 | Three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame used as a class-match parameter. For frames co… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.12 | agentDiffServAuxMfClfrTos | 0 | 0 | IP TOS bits value, defined as all eight bits of the Service Type octet in the IPv4 header. There are multiple, overlapping, meani… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.13 | agentDiffServAuxMfClfrTosMask | 0 | 0 | IP TOS bits mask value. It identifies the portion of agentDiffServAuxMfClfrTos that is compared against a packet. A non-contiguou… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.14 | agentDiffServAuxMfClfrDstMac | 0 | 0 | Destination MAC address. |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.15 | agentDiffServAuxMfClfrDstMacMask | 0 | 0 | Destination MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrDstMac that is compared again… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.16 | agentDiffServAuxMfClfrSrcMac | 0 | 0 | Source MAC address. |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.17 | agentDiffServAuxMfClfrSrcMacMask | 0 | 0 | Source MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrSrcMac that is compared against a … |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.18 | agentDiffServAuxMfClfrVlanId | 0 | 0 | VLAN ID value for the classifier. A value of -1 indicates that a specific VLAN ID value has not been defined and thus all VLAN I… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.19 | agentDiffServAuxMfClfrStorage | 0 | 0 | The storage type for this conceptual row. |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.20 | agentDiffServAuxMfClfrStatus | 0 | 0 | The status of this conceptual row. |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.21 | agentDiffServAuxMfClfrCos2 | 0 | 0 | Three-bit user priority field in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame used as a class-match… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.22 | agentDiffServAuxMfClfrEtypeVal1 | 0 | 0 | Ethertype value to be compared in order to match this classifier entry. The allowed value for this object is 0x0600 to 0xFFFF, w… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.23 | agentDiffServAuxMfClfrEtypeVal2 | 0 | 0 | A second Ethertype value to be compared in order to match this classifier entry. This value is considered in addition to the val… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.24 | agentDiffServAuxMfClfrVlanIdMin | 0 | 0 | The minimum value that the VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.25 | agentDiffServAuxMfClfrVlanIdMax | 0 | 0 | The maximum value that the VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.26 | agentDiffServAuxMfClfrVlanId2Min | 0 | 0 | The minimum value that the Secondary VLAN ID in the packet must have in order to match this classifier entry. This field is def… |
| 1.3.6.1.4.1.4526.10.3.6.1.1.2.1.27 | agentDiffServAuxMfClfrVlanId2Max | 0 | 0 | The maximum value that the Secondary VLAN ID in the packet must have in order to match this classifier entry. This field is def… |