OID reference
1.3.6.1.4.1.4526.10.35.2.2.4
The compliance statement for managed network entities which have ethernet-like network interfaces. Note that compliance with this MIB module requires compliance with the ifCompliance3 MODULE-COMPLIANCE statement of the IF-MIB (RFC2863). In addition, compliance with this MIB module requires compliance with the mauModIf…
Identification
{1 3 6 1 4 1 4526 10 35 2 2 4}
The displayed source records contain one distinct definition. Compare its source records.
dot3Compliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for managed network
entities which have ethernet-like network
interfaces.
Note that compliance with this MIB module
requires compliance with the ifCompliance3
MODULE-COMPLIANCE statement of the IF-MIB
(RFC2863). In addition, compliance with this
MIB module requires compliance with the
mauModIfCompl3 MODULE-COMPLIANCE statement of
the MAU-MIB (RFC3636)."
MODULE -- this module
MANDATORY-GROUPS { etherStatsBaseGroup2 }
GROUP etherDuplexGroup
DESCRIPTION "This group is mandatory for all
ethernet-like network interfaces which are
capable of operating in full-duplex mode.
It is highly recommended for all
ethernet-like network interfaces."
GROUP etherRateControlGroup
DESCRIPTION "This group is mandatory for all
ethernet-like network interfaces which are
capable of operating at speeds faster than
1000 Mb/s. It is highly recommended for all
ethernet-like network interfaces."
GROUP etherStatsLowSpeedGroup
DESCRIPTION "This group is mandatory for all
ethernet-like network interfaces which are
capable of operating at 10 Mb/s or slower in
half-duplex mode."
GROUP etherStatsHighSpeedGroup
DESCRIPTION "This group is mandatory for all
ethernet-like network interfaces which are
capable of operating at 100 Mb/s or faster."
GROUP etherStatsHalfDuplexGroup
DESCRIPTION "This group is mandatory for all
ethernet-like network interfaces which are
capable of operating in half-duplex mode."
GROUP etherHCStatsGroup
DESCRIPTION "This group is mandatory for all
ethernet-like network interfaces which are
capable of operating at 10 Gb/s or faster.
It is recommended for all ethernet-like
network interfaces which are capable of
operating at 1000 Mb/s or faster."
GROUP etherControlGroup
DESCRIPTION "This group is mandatory for all
ethernet-like network interfaces that
support the MAC Control sublayer."
GROUP etherHCControlGroup
DESCRIPTION "This group is mandatory for all
ethernet-like network interfaces that
support the MAC Control sublayer and are
capable of operating at 10 Gb/s or faster."
GROUP etherControlPauseGroup
DESCRIPTION "This group is mandatory for all
ethernet-like network interfaces that
support the MAC Control PAUSE function."
GROUP etherHCControlPauseGroup
DESCRIPTION "This group is mandatory for all
ethernet-like network interfaces that
support the MAC Control PAUSE function and
are capable of operating at 10 Gb/s or
faster."
GROUP etherCollisionTableGroup
DESCRIPTION "This group is optional. It is appropriate
for all ethernet-like network interfaces
which are capable of operating in
half-duplex mode and have the necessary
metering. Implementation in systems with
such interfaces is highly recommended."
::= { etherCompliances 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The compliance statement for managed network entities which have ethernet-like network interfaces. Note that compliance with this MIB module requires compliance with the ifCompliance3 MODULE-COMPLIANCE statement of the IF-MIB (RFC2863). In addition, compliance with this MIB module requires compliance with the mauModIfCompl3 MODULE-COMPLIANCE statement of the MAU-MIB (RFC3636).
NETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dot3Compliance2
{
"smi_kind": "MODULE-COMPLIANCE",
"definition": [
"dot3Compliance2",
"MODULE-COMPLIANCE",
"STATUS",
"current",
"DESCRIPTION",
"\"The compliance statement for managed network entities which have ethernet-like network interfaces. Note that compliance with this MIB module requires compliance with the ifCompliance3 MODULE-COMPLIANCE statement of the IF-MIB (RFC2863). In addition, compliance with this MIB module requires compliance with the mauModIfCompl3 MODULE-COMPLIANCE statement of the MAU-MIB (RFC3636).\"",
"MODULE",
"MANDATORY-GROUPS",
"{",
"etherStatsBaseGroup2",
"}",
"GROUP",
"etherDuplexGroup",
"DESCRIPTION",
"\"This group is mandatory for all ethernet-like network interfaces which are capable of operating in full-duplex mode. It is highly recommended for all ethernet-like network interfaces.\"",
"GROUP",
"etherRateControlGroup",
"DESCRIPTION",
"\"This group is mandatory for all ethernet-like network interfaces which are capable of operating at speeds faster than 1000 Mb/s. It is highly recommended for all ethernet-like network interfaces.\"",
"GROUP",
"etherStatsLowSpeedGroup",
"DESCRIPTION",
"\"This group is mandatory for all ethernet-like network interfaces which are capable of operating at 10 Mb/s or slower in half-duplex mode.\"",
"GROUP",
"etherStatsHighSpeedGroup",
"DESCRIPTION",
"\"This group is mandatory for all ethernet-like network interfaces which are capable of operating at 100 Mb/s or faster.\"",
"GROUP",
"etherStatsHalfDuplexGroup",
"DESCRIPTION",
"\"This group is mandatory for all ethernet-like network interfaces which are capable of operating in half-duplex mode.\"",
"GROUP",
"etherHCStatsGroup",
"DESCRIPTION",
"\"This group is mandatory for all ethernet-like network interfaces which are capable of operating at 10 Gb/s or faster. It is recommended for all ethernet-like network interfaces which are capable of operating at 1000 Mb/s or faster.\"",
"GROUP",
"etherControlGroup",
"DESCRIPTION",
"\"This group is mandatory for all ethernet-like network interfaces that support the MAC Control sublayer.\"",
"GROUP",
"etherHCControlGroup",
"DESCRIPTION",
"\"This group is mandatory for all ethernet-like network interfaces that support the MAC Control sublayer and are capable of operating at 10 Gb/s or faster.\"",
"GROUP",
"etherControlPauseGroup",
"DESCRIPTION",
"\"This group is mandatory for all ethernet-like network interfaces that support the MAC Control PAUSE function.\"",
"GROUP",
"etherHCControlPauseGroup",
"DESCRIPTION",
"\"This group is mandatory for all ethernet-like network interfaces that support the MAC Control PAUSE function and are capable of operating at 10 Gb/s or faster.\"",
"GROUP",
"etherCollisionTableGroup",
"DESCRIPTION",
"\"This group is optional. It is appropriate for all ethernet-like network interfaces which are capable of operating in half-duplex mode and have the necessary metering. Implementation in systems with such interfaces is highly recommended.\"",
"::=",
"{",
"etherCompliances",
"4",
"}"
],
"syntax_tree": [
[
"Status",
"current"
],
[
"DESCRIPTION",
"The compliance statement for managed network entities which have ethernet-like network interfaces. Note that compliance with this MIB module requires compliance with the ifCompliance3 MODULE-COMPLIANCE statement of the IF-MIB (RFC2863). In addition, compliance with this MIB module requires compliance with the mauModIfCompl3 MODULE-COMPLIANCE statement of the MAU-MIB (RFC3636)."
],
null,
[
"ComplianceModules",
[
[
null,
[
"etherStatsBaseGroup2",
"etherDuplexGroup",
"etherRateControlGroup",
"etherStatsLowSpeedGroup",
"etherStatsHighSpeedGroup",
"etherStatsHalfDuplexGroup",
"etherHCStatsGroup",
"etherControlGroup",
"etherHCControlGroup",
"etherControlPauseGroup",
"etherHCControlPauseGroup",
"etherCollisionTableGroup"
]
]
]
]
]
}Module: EtherLike-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Counter32', 'Counter64', 'mib-2', 'transmission'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'BROADCOM-REF-MIB': ['ng7000managedswitch']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.35.2.2.1 | etherCompliance | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.35.2.2.2 | ether100MbsCompliance | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.35.2.2.3 | dot3Compliance | 0 | 0 |