Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentPethPowerDetectionType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"none",
"(",
"0",
")",
",",
"legacy",
"(",
"1",
")",
",",
"fourPtdot3afonly",
"(",
"2",
")",
",",
"fourPtdot3afandlegacy",
"(",
"3",
")",
",",
"twoPtdot3afonly",
"(",
"4",
")",
",",
"twoPtdot3afandlegacy",
"(",
"5",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Describes PD detection mechanism performed by the PSE port. A value of none(0) means no detection is done. A value of legacy(1) means only legacy capacitive detection scheme is used. A value of 4ptdot3afonly(2) means that IEEE 802.3af 4point detection scheme is used. A value of 4ptdot3afandlegacy(3)means that IEEE 802.3af 4point detection scheme is used and when that fails to detect a connected PD, legacity capacitive detection is used. A value of 2ptdot3afonly(4) means that IEEE 802.3af 2point detection scheme is used. A value of 2ptdot3afandlegacy(5)means that IEEE 802.3af 2point detection scheme is used and when that fails to detect a connected PD, legacity capacitive detection is used. The value 'none' can not be forcibly set by the administrator.\"",
"REFERENCE",
"\"Broadcom 5910X programmers guide, IEEE Std 802.3af Section 30.9.1.1.6\"",
"::=",
"{",
"agentPethPsePortEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"none",
0
],
[
"legacy",
1
],
[
"fourPtdot3afonly",
2
],
[
"fourPtdot3afandlegacy",
3
],
[
"twoPtdot3afonly",
4
],
[
"twoPtdot3afandlegacy",
5
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Describes PD detection mechanism performed by the PSE port. A value of none(0) means no detection is done. A value of legacy(1) means only legacy capacitive detection scheme is used. A value of 4ptdot3afonly(2) means that IEEE 802.3af 4point detection scheme is used. A value of 4ptdot3afandlegacy(3)means that IEEE 802.3af 4point detection scheme is used and when that fails to detect a connected PD, legacity capacitive detection is used. A value of 2ptdot3afonly(4) means that IEEE 802.3af 2point detection scheme is used. A value of 2ptdot3afandlegacy(5)means that IEEE 802.3af 2point detection scheme is used and when that fails to detect a connected PD, legacity capacitive detection is used. The value 'none' can not be forcibly set by the administrator."
],
[
"REFERENCE",
"Broadcom 5910X programmers guide, IEEE Std 802.3af Section 30.9.1.1.6"
],
null,
null,
null
]
}