OID reference

agentPethFaultStatus

1.3.6.1.4.1.4526.11.15.1.1.1.9

Description

Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.4526.11.15.1.1.1 (agentPethPsePortEntry)
Node code
9
Node name
agentPethFaultStatus
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.4526.11.15.1.1.1.9
URN notation
urn:oid:1.3.6.1.4.1.4526.11.15.1.1.1.9
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 4526 11 15 1 1 1 9}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) netgear(4526) ng700smartswitch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) netgear(4526) ng700Switch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) netgear(4526) ng700smartswitch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) netgear(4526) ng700Switch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) netgear(4526) ng700smartswitch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) netgear(4526) ng700Switch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) netgear(4526) ng700smartswitch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) netgear(4526) ng700Switch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) netgear(4526) ng700smartswitch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) netgear(4526) ng700Switch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) netgear(4526) ng700smartswitch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) netgear(4526) ng700Switch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) netgear(4526) ng700smartswitch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) netgear(4526) ng700Switch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) netgear(4526) ng700smartswitch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) netgear(4526) ng700Switch(11) fastPathpowerEthernetMIB(15) agentPethObjects(1) agentPethPsePortTable(1) agentPethPsePortEntry(1) agentPethFaultStatus(9)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/4526/11/15/1/1/1/9
  • /ISO/Identified-Organization/6/1/4/1/4526/11/15/1/1/1/9
  • /ISO/3/6/1/4/1/4526/11/15/1/1/1/9
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/netgear/ng700smartswitch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/enterprise/netgear/ng700Switch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/enterprise/netgear_1/ng700smartswitch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/enterprise/netgear_1/ng700Switch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/enterprises/netgear/ng700smartswitch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/enterprises/netgear/ng700Switch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/enterprises/netgear_1/ng700smartswitch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/enterprises/netgear_1/ng700Switch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/netgear/ng700smartswitch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/netgear/ng700Switch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/netgear_1/ng700smartswitch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/netgear_1/ng700Switch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/netgear/ng700smartswitch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/netgear/ng700Switch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/netgear_1/ng700smartswitch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/netgear_1/ng700Switch/fastPathpowerEthernetMIB/agentPethObjects/agentPethPsePortTable/agentPethPsePortEntry/agentPethFaultStatus
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — NETGEAR official product and EOL MIB downloads, NETGEAR MIB copies (LibreNMS/Observium Community)

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Variant 2 — NETGEAR official product and EOL MIB downloads

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

ValueNameSource variants
0none1, 2
1mpsAbsent1, 2
2short1, 2
3overload1, 2
4powerDenied1, 2
5thermalShutdown2
6startupFailure2

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published AUGMENTS row: pethPsePortEntry. Check that row's index definition for the instance suffix.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4526.11.15.1.1.1.9

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:

These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.

Available source records contain 4 distinct definitions; some records may not include a definition.

Show 4 published definitions

agentPethFaultStatus · current

agentPethFaultStatus OBJECT-TYPE
    SYNTAX INTEGER   {
               none(0),
               mpsAbsent(1),
               short(2),
               overload(3),
               powerDenied(4)
     }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Describes the error description when the pse port is in fault status.
         A value of none(0) specifies that the pse port is not in any error state.
         A value of mpsAbsent(1) specifies that the pse port has detected and absence
         of main power supply.
         A value of short(2) specifies that the pse port has detected a short circuit
         condition.
         A value of overload(3) specifies that the pd connected to the pse port had tried
         to draw more power than permissible by the hardware. 
         A value of powerDenied(4) specifies that the pse port has been denied power
         because of shortage of power or due to administrative action."
    REFERENCE
      "Broadcom 5910X programmers guide, IEEE Std 802.3af"

    ::= { agentPethPsePortEntry 9 }

agentPethFaultStatus · current

agentPethFaultStatus OBJECT-TYPE
    SYNTAX INTEGER   {
               none(0),
               mpsAbsent(1),
               short(2),
               overload(3),
               powerDenied(4)
     }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Describes the error description when the pse port is in fault status.
         A value of none(0) specifies that the pse port is not in any error state.
         A value of mpsAbsent(1) specifies that the pse port has detected and absence
         of main power supply.
         A value of short(2) specifies that the pse port has detected a short circuit
         condition.
         A value of overload(3) specifies that the pd connected to the pse port had tried
         to draw more power than permissible by the hardware. 
         A value of powerDenied(4) specifies that the pse port has been denied power
         because of shortage of power or due to administrative action."
    REFERENCE
      "Broadcom 5910X programmers guide, IEEE Std 802.3af"

    ::= { agentPethPsePortEntry 9 }

agentPethFaultStatus · current

agentPethFaultStatus OBJECT-TYPE
    SYNTAX INTEGER   {
               none(0),
               mpsAbsent(1),
               short(2),
               overload(3),
               powerDenied(4),
               thermalShutdown(5),
               startupFailure(6)
     }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Describes the error description when the pse port is in fault status.
         A value of none(0) specifies that the pse port is not in any error state.
         A value of mpsAbsent(1) specifies that the pse port has detected and absence
         of main power supply.
         A value of short(2) specifies that the pse port has detected a short circuit
         condition.
         A value of overload(3) specifies that the pd connected to the pse port had tried
         to draw more power than permissible by the hardware. 
         A value of powerDenied(4) specifies that the pse port has been denied power
         because of shortage of power or due to administrative action.
         A value of thermalShutdown(5) specifies that the thermal threshold has exceeded 
         for the pse port.
         A value of startupFailure(6) as fault status indicates that the port does not have
         sufficient voltage."
    REFERENCE
      "Broadcom 5910X programmers guide, IEEE Std 802.3af"

    ::= { agentPethPsePortEntry 9 }

agentPethFaultStatus · current

agentPethFaultStatus OBJECT-TYPE
    SYNTAX INTEGER   {
               none(0),
               mpsAbsent(1),
               short(2),
               overload(3),
               powerDenied(4),
               thermalShutdown(5),
               startupFailure(6)
     }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Describes the error description when the pse port is in fault status.
         A value of none(0) specifies that the pse port is not in any error state.
         A value of mpsAbsent(1) specifies that the pse port has detected and absence
         of main power supply.
         A value of short(2) specifies that the pse port has detected a short circuit
         condition.
         A value of overload(3) specifies that the pd connected to the pse port had tried
         to draw more power than permissible by the hardware. 
         A value of powerDenied(4) specifies that the pse port has been denied power
         because of shortage of power or due to administrative action.
         A value of thermalShutdown(5) specifies that the thermal threshold has exceeded 
         for the pse port.
         A value of startupFailure(6) as fault status indicates that the port does not have
         sufficient voltage."
    REFERENCE
      "Broadcom 5910X programmers guide, IEEE Std 802.3af"

    ::= { agentPethPsePortEntry 9 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware. A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action.

Sources for this description

NETGEAR official product and EOL MIB downloadsNETGEAR MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 2

Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware. A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action. A value of thermalShutdown(5) specifies that the thermal threshold has exceeded for the pse port. A value of startupFailure(6) as fault status indicates that the port does not have sufficient voltage.

Sources for this description

NETGEAR official product and EOL MIB downloads

See 1 matching source record

Evidence

Source records

2 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1NETGEAR official product and EOL MIB downloads, NETGEAR MIB copies (LibreNMS/Observium Community)1 record · 3 sources

Description 1

agentPethFaultStatus · currentNETGEAR official product and EOL MIB downloads, NETGEAR MIB copies (LibreNMS/Observium Community)3 sources

Status in source: current.

Names: agentPethFaultStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "agentPethFaultStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "none",
    "(",
    "0",
    ")",
    ",",
    "mpsAbsent",
    "(",
    "1",
    ")",
    ",",
    "short",
    "(",
    "2",
    ")",
    ",",
    "overload",
    "(",
    "3",
    ")",
    ",",
    "powerDenied",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware. A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action.\"",
    "REFERENCE",
    "\"Broadcom 5910X programmers guide, IEEE Std 802.3af\"",
    "::=",
    "{",
    "agentPethPsePortEntry",
    "9",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "none",
            0
          ],
          [
            "mpsAbsent",
            1
          ],
          [
            "short",
            2
          ],
          [
            "overload",
            3
          ],
          [
            "powerDenied",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware. A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action."
    ],
    [
      "REFERENCE",
      "Broadcom 5910X programmers guide, IEEE Std 802.3af"
    ],
    null,
    null,
    null
  ]
}
Records for description 2NETGEAR official product and EOL MIB downloads1 record · 8 sources

Description 2

agentPethFaultStatus · currentNETGEAR official product and EOL MIB downloads8 sources

Status in source: current.

Names: agentPethFaultStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "agentPethFaultStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "none",
    "(",
    "0",
    ")",
    ",",
    "mpsAbsent",
    "(",
    "1",
    ")",
    ",",
    "short",
    "(",
    "2",
    ")",
    ",",
    "overload",
    "(",
    "3",
    ")",
    ",",
    "powerDenied",
    "(",
    "4",
    ")",
    ",",
    "thermalShutdown",
    "(",
    "5",
    ")",
    ",",
    "startupFailure",
    "(",
    "6",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware. A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action. A value of thermalShutdown(5) specifies that the thermal threshold has exceeded for the pse port. A value of startupFailure(6) as fault status indicates that the port does not have sufficient voltage.\"",
    "REFERENCE",
    "\"Broadcom 5910X programmers guide, IEEE Std 802.3af\"",
    "::=",
    "{",
    "agentPethPsePortEntry",
    "9",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "none",
            0
          ],
          [
            "mpsAbsent",
            1
          ],
          [
            "short",
            2
          ],
          [
            "overload",
            3
          ],
          [
            "powerDenied",
            4
          ],
          [
            "thermalShutdown",
            5
          ],
          [
            "startupFailure",
            6
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware. A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action. A value of thermalShutdown(5) specifies that the thermal threshold has exceeded for the pse port. A value of startupFailure(6) as fault status indicates that the port does not have sufficient voltage."
    ],
    [
      "REFERENCE",
      "Broadcom 5910X programmers guide, IEEE Std 802.3af"
    ],
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.4526)

Michael Shields

Siblings (11)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.4526.11.15.1.1.1.1 agentPethPowerLimit00
1.3.6.1.4.1.4526.11.15.1.1.1.2 agentPethOutputPower00
1.3.6.1.4.1.4526.11.15.1.1.1.3 agentPethOutputCurrent00
1.3.6.1.4.1.4526.11.15.1.1.1.4 agentPethOutputVolts00
1.3.6.1.4.1.4526.11.15.1.1.1.5 agentPethTemperature00
1.3.6.1.4.1.4526.11.15.1.1.1.6 agentPethPowerLimitType00
1.3.6.1.4.1.4526.11.15.1.1.1.7 agentPethHighPowerEnable00
1.3.6.1.4.1.4526.11.15.1.1.1.8 agentPethPowerDetectionType00
1.3.6.1.4.1.4526.11.15.1.1.1.10 agentPethPortReset00
1.3.6.1.4.1.4526.11.15.1.1.1.11 agentPethPowerLimitMin00
1.3.6.1.4.1.4526.11.15.1.1.1.12 agentPethPowerLimitMax00