OID reference
1.3.6.1.4.1.4526.17.216.2.1.29
Configure the router to send a syslog message when an OSPF neighbor goes up or down. detail — sends a syslog message for each state change, not just when a neighbor goes up or down
Identification
{1 3 6 1 4 1 4526 17 216 2 1 29}
| Value | Name |
|---|---|
| 1 | enable |
| 2 | detail |
| 3 | disable |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: rlOspfv3ProcessId.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4526.17.216.2.1.29
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlOspfv3LogAdjacencyChanges OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
detail (2),
disable (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the router to send a syslog message when an OSPF
neighbor goes up or down.
detail — sends a syslog message for each state change,
not just when a neighbor goes up or down"
::= { rlOspfv3GeneralGroupEntry 29 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Configure the router to send a syslog message when an OSPF neighbor goes up or down. detail — sends a syslog message for each state change, not just when a neighbor goes up or down
NETGEAR MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlOspfv3LogAdjacencyChanges
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlOspfv3LogAdjacencyChanges",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"detail",
"(",
"2",
")",
",",
"disable",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Configure the router to send a syslog message when an OSPF neighbor goes up or down. detail — sends a syslog message for each state change, not just when a neighbor goes up or down\"",
"::=",
"{",
"rlOspfv3GeneralGroupEntry",
"29",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"detail",
2
],
[
"disable",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Configure the router to send a syslog message when an OSPF neighbor goes up or down. detail — sends a syslog message for each state change, not just when a neighbor goes up or down"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. NETGEAR support.
Module: NETGEAR-RADLAN-OSPFV3-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'OSPF-MIB': ['AreaID', 'RouterID', 'Metric', 'BigMetric', 'Status', 'PositiveInteger', 'UpToMaxAge', 'TOSType', 'OspfAuthenticationType', 'HelloRange', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'TimeStamp', 'DisplayString'], 'OSPFV3-MIB': ['Ospfv3UpToRefreshIntervalTC', 'Ospfv3DeadIntervalRangeTC', 'Ospfv3RouterIdTC', 'Ospfv3LsIdTC', 'Ospfv3AreaIdTC', 'Ospfv3IfInstIdTC', 'Ospfv3LsaSequenceTC', 'Ospfv3LsaAgeTC'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Counter32', 'Gauge32', 'Integer32', 'Unsigned32', 'IpAddress'], 'RFC1213-MIB': ['mib-2'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetAddressIPv6'], 'NETGEAR-RADLAN-MIB': ['rnd'], 'NETGEAR-RADLAN-OSPF-MIB': ['RlOspfProcessID', 'RlOspfFastHelloMultiplierRange', 'RlOspfRestartHelperStatus', 'RlOspfRestartExitReason', 'RlOspfRouterIdType']}Related source files and packages:
Registration