Refer to Application Type. Frame Relay is based upon
HDLC framing. To operate in a Frame Relay application
the Format must be set for HDLC. To operate in a
protocol-independent application the Format must be
set for Constant Bit Operation (CBO). Note - changing
this value will automatically change the Application
Type setting and vice versa
(1) CBO: protocol-independent transparent DSU/CSU
(2) HDLC: Frame and protocol aware DSU/CSU
Parsed from file MFRAP.MIB.txt
Company: None
Module: MFRAP-MIB
Refer to Application Type. Frame Relay is based upon
HDLC framing. To operate in a Frame Relay application
the Format must be set for HDLC. To operate in a
protocol-independent application the Format must be
set for Constant Bit Operation (CBO). Note - changing
this value will automatically change the Application
Type setting and vice versa
(1) CBO: protocol-independent transparent DSU/CSU
(2) HDLC: Frame and protocol aware DSU/CSU
Parsed from file MFRAP-MIB.mib
Module: MFRAP-MIB
Vendor: Sync Research, Inc.
Module: MFRAP-MIB
[Automatically extracted from oidview.com]
mfrapCfgAppFormat OBJECT-TYPE SYNTAX INTEGER { cbo (1), hdlc (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Refer to Application Type. Frame Relay is based upon HDLC framing. To operate in a Frame Relay application the Format must be set for HDLC. To operate in a protocol-independent application the Format must be set for Constant Bit Operation (CBO). Note - changing this value will automatically change the Application Type setting and vice versa (1) CBO: protocol-independent transparent DSU/CSU (2) HDLC: Frame and protocol aware DSU/CSU" ::= { mfrapCfgAppTable 4 }
mfrapCfgAppFormat OBJECT-TYPE SYNTAX INTEGER { cbo (1), hdlc (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Refer to Application Type. Frame Relay is based upon HDLC framing. To operate in a Frame Relay application the Format must be set for HDLC. To operate in a protocol-independent application the Format must be set for Constant Bit Operation (CBO). Note - changing this value will automatically change the Application Type setting and vice versa (1) CBO: protocol-independent transparent DSU/CSU (2) HDLC: Frame and protocol aware DSU/CSU" ::= { mfrapCfgAppTable 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.2.4.0 | mfrapCfgAppFormat | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.2.1 | mfrapCfgAppClockSource | 1 | 1 | Default timing, or clock, source. There must be only one source on a T1 line. Node should always be network (2) timed on a poin… |
| 1.3.6.1.4.1.485.8.2.2.2 | mfrapCfgAppCircuitId | 1 | 1 | Circuit identifier provided by the service provider. |
| 1.3.6.1.4.1.485.8.2.2.3 | mfrapCfgAppType | 1 | 1 | Indicates type of service purchased on the attached network line T1. Valid selections are dedicated (1) and Frame Relay (2). |
| 1.3.6.1.4.1.485.8.2.2.5 | mfrapCfgAppLpbkTimeout | 1 | 1 | The amount of time a loopback may run before timing out and automatically terminating. The timeout is in minutes and a value of 0… |
| 1.3.6.1.4.1.485.8.2.2.10 | mfrapCfgAppPerfBuffLimit | 1 | 1 | This value represents the throttling mechanism used to determine the optimum level of statistical processing versus managability … |