The time-out value which determines how often a
station shall send a Report Error MAC frame to
report its error counters, in units of 100
micro-seconds.
Implementors are encouraged to provide
read-write access to this object if that is
possible/useful in their system, but giving
due consideration to the dangers of write-able
timers.
Parsed from file isd_mib.txt
Company: None
Module: CHIPCOMMIB
The time-out value which determines how often a
station shall send a Report Error MAC frame to
report its error counters, in units of 100
micro-seconds.
Implementors are encouraged to provide
read-write access to this object if that is
possible/useful in their system, but giving
due consideration to the dangers of write-able
timers.
Parsed from file CHIPCOMMIB.mib
Module: CHIPCOMMIB
Vendor: Chippcom
Module: CHIPCOMMIB
[Automatically extracted from oidview.com]
dot5TimerErrorReport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The time-out value which determines how often a station shall send a Report Error MAC frame to report its error counters, in units of 100 micro-seconds. Implementors are encouraged to provide read-write access to this object if that is possible/useful in their system, but giving due consideration to the dangers of write-able timers." ::= { dot5TimerEntry 9 }
expDot5TimerErrorReport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "The time-out value which determines how often a station shall send a Report Error MAC frame to report its error counters, in units of 100 micro-seconds. Implementors are encouraged to provide read-write access to this object if that is possible/useful in their system, but giving due consideration to the dangers of write-able timers." ::= { expDot5TimerEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.49.2.4.1.1.5.1.1 | expDot5TimerIfIndex, dot5TimerIfIndex | 0 | 0 | The value of this object identifies the 802.5 interface for which this entry contains timer values. The value of this object for… |
| 1.3.6.1.4.1.49.2.4.1.1.5.1.2 | expDot5TimerReturnRepeat, dot5TimerReturnRepeat | 0 | 0 | The time-out value used to ensure the interface will return to Repeat State, in units of 100 micro-seconds. The value should be g… |
| 1.3.6.1.4.1.49.2.4.1.1.5.1.3 | expDot5TimerHolding, dot5TimerHolding | 0 | 0 | Maximum period of time a station is permitted to transmit frames after capturing a token, in units of 100 micro-seconds. Implement… |
| 1.3.6.1.4.1.49.2.4.1.1.5.1.4 | expDot5TimerQueuePDU, dot5TimerQueuePDU | 0 | 0 | The time-out value for enqueuing of an SMP PDU after reception of an AMP or SMP frame in which the A and C bits were equal to 0, … |
| 1.3.6.1.4.1.49.2.4.1.1.5.1.5 | expDot5TimerValidTransmit, dot5TimerValidTransmit | 0 | 0 | The time-out value used by the active monitor to detect the absence of valid transmissions, in units of 100 micro-seconds. Impleme… |
| 1.3.6.1.4.1.49.2.4.1.1.5.1.6 | expDot5TimerNoToken, dot5TimerNoToken | 0 | 0 | The time-out value used to recover from various-related error situations [9]. If N is the maximum number of stations on the ring,… |
| 1.3.6.1.4.1.49.2.4.1.1.5.1.7 | expDot5TimerActiveMon, dot5TimerActiveMon | 0 | 0 | The time-out value used by the active monitor to stimulate the enqueuing of an AMP PDU for transmission, in units of 100 micro-se… |
| 1.3.6.1.4.1.49.2.4.1.1.5.1.8 | expDot5TimerStandbyMon, dot5TimerStandbyMon | 0 | 0 | The time-out value used by the stand-by monitors to ensure that there is an active monitor on the ring and to detect a continuous… |
| 1.3.6.1.4.1.49.2.4.1.1.5.1.10 | expDot5TimerBeaconTransmit, dot5TimerBeaconTransmit | 0 | 0 | The time-out value which determines how long a station shall remain in the state of transmitting Beacon frames before entering th… |
| 1.3.6.1.4.1.49.2.4.1.1.5.1.11 | expDot5TimerBeaconReceive, dot5TimerBeaconReceive | 0 | 0 | The time-out value which determines how long a station shall receive Beacon frames from its downstream neighbor before entering t… |