Modem Deregistration Reason
normal - the CMTS has lost contact witht the modem.
operatorReset - reset by the operator
operatorDisabled - operator has disabled the modem
operatorDeleted - was removed from the system
transmissionFailed - the transmitter communicating to the modem
has failed
transmissionDisabled - the transmitter communicating to the modem
has been disabled
transmissionDeleted - the transmitter communicating to the modem
has been deleted
servingGroupChanged - the assignment of the serving groups for the
modem has changed
receiverFailed - the receiver communicating with the modem has
failed
receiverDisabled - the receiver communicating with the modem has
been disabled
receiverDeleted - the receiver communicating with the modem has
beeb deleted
channelDeleted - a channel has changed on the reciver that has
caused the modem to deregister
channelErrors - deregistered due to unacceptable amount of channel
errors
incompleteReg - deregistered due to incomplete registration
profileUpdateComplete - deregistered after profile update
skeyFailure - deregistered due to session key failure
dnChanChangeFailure - due to downstream transmission channel change failure
noDeregReason - no deregistration reason available
powerTolerance - power ranging corrections were out of tolerance
freqTolerance - frequency ranging corrections were out of tolerance
timingTolerance - timing ranging correction were out of tolerance
rangingTolerance - multiple ranging corrections were out of tolerance
noResponseUCC - modem did not respond to the UCC request
This is a place holder for the modem deregistration reason. This should
return ZERO when read. This just allows us to include a deregistration
reason in the modem deregistration trap varbind.
Parsed from file rdn-cmts.mib.txt
Company: None
Module: RDN-CMTS-MIB
Modem Deregistration Reason
normal - the CMTS has lost contact witht the modem.
operatorReset - reset by the operator
operatorDisabled - operator has disabled the modem
operatorDeleted - was removed from the system
transmissionFailed - the transmitter communicating to the modem
has failed
transmissionDisabled - the transmitter communicating to the modem
has been disabled
transmissionDeleted - the transmitter communicating to the modem
has been deleted
servingGroupChanged - the assignment of the serving groups for the
modem has changed
receiverFailed - the receiver communicating with the modem has
failed
receiverDisabled - the receiver communicating with the modem has
been disabled
receiverDeleted - the receiver communicating with the modem has
beeb deleted
channelDeleted - a channel has changed on the reciver that has
caused the modem to deregister
channelErrors - deregistered due to unacceptable amount of channel
errors
incompleteReg - deregistered due to incomplete registration
profileUpdateComplete - deregistered after profile update
skeyFailure - deregistered due to session key failure
dnChanChangeFailure - due to downstream transmission channel change failure
noDeregReason - no deregistration reason available
powerTolerance - power ranging corrections were out of tolerance
freqTolerance - frequency ranging corrections were out of tolerance
timingTolerance - timing ranging correction were out of tolerance
rangingTolerance - multiple ranging corrections were out of tolerance
noResponseUCC - modem did not respond to the UCC request
This is a place holder for the modem deregistration reason. This should
return ZERO when read. This just allows us to include a deregistration
reason in the modem deregistration trap varbind.
Parsed from file RDN-CMTS-MIB.mib
Module: RDN-CMTS-MIB
Vendor: RiverDelta Networks
Module: RDN-CMTS-MIB
[Automatically extracted from oidview.com]
rdnModemDeregReason OBJECT-TYPE SYNTAX INTEGER { normal(1), operatorReset(2), operatorDisabled(3), operatorDeleted(4), transmissionFailed(5), transmissionDisabled(6), transmissionDeleted(7), servingGroupChanged(8), receiverFailed(9), receiverDisabled(10), receiverDeleted(11), channelDeleted(12), channelErrors(13), incompleteReg(14), profileUpdateComplete(15), skeyFailure(16), dnChanChangeFailure(17), noDeregReason(18), powerTolerance(19), freqTolerance(20), timingTolerance(21), rangingTolerance(22), noResponseUCC(23) } MAX-ACCESS read-only STATUS current DESCRIPTION "Modem Deregistration Reason normal - the CMTS has lost contact witht the modem. operatorReset - reset by the operator operatorDisabled - operator has disabled the modem operatorDeleted - was removed from the system transmissionFailed - the transmitter communicating to the modem has failed transmissionDisabled - the transmitter communicating to the modem has been disabled transmissionDeleted - the transmitter communicating to the modem has been deleted servingGroupChanged - the assignment of the serving groups for the modem has changed receiverFailed - the receiver communicating with the modem has failed receiverDisabled - the receiver communicating with the modem has been disabled receiverDeleted - the receiver communicating with the modem has beeb deleted channelDeleted - a channel has changed on the reciver that has caused the modem to deregister channelErrors - deregistered due to unacceptable amount of channel errors incompleteReg - deregistered due to incomplete registration profileUpdateComplete - deregistered after profile update skeyFailure - deregistered due to session key failure dnChanChangeFailure - due to downstream transmission channel change failure noDeregReason - no deregistration reason available powerTolerance - power ranging corrections were out of tolerance freqTolerance - frequency ranging corrections were out of tolerance timingTolerance - timing ranging correction were out of tolerance rangingTolerance - multiple ranging corrections were out of tolerance noResponseUCC - modem did not respond to the UCC request This is a place holder for the modem deregistration reason. This should return ZERO when read. This just allows us to include a deregistration reason in the modem deregistration trap varbind. " ::= { rdnCmtsMiscObjects 9 }
rdnModemDeregReason OBJECT-TYPE SYNTAX INTEGER { normal(1), operatorReset(2), operatorDisabled(3), operatorDeleted(4), transmissionFailed(5), transmissionDisabled(6), transmissionDeleted(7), servingGroupChanged(8), receiverFailed(9), receiverDisabled(10), receiverDeleted(11), channelDeleted(12), channelErrors(13), incompleteReg(14), profileUpdateComplete(15), skeyFailure(16), dnChanChangeFailure(17), noDeregReason(18), powerTolerance(19), freqTolerance(20), timingTolerance(21), rangingTolerance(22), noResponseUCC(23) } MAX-ACCESS read-only STATUS current DESCRIPTION "Modem Deregistration Reason normal - the CMTS has lost contact witht the modem. operatorReset - reset by the operator operatorDisabled - operator has disabled the modem operatorDeleted - was removed from the system transmissionFailed - the transmitter communicating to the modem has failed transmissionDisabled - the transmitter communicating to the modem has been disabled transmissionDeleted - the transmitter communicating to the modem has been deleted servingGroupChanged - the assignment of the serving groups for the modem has changed receiverFailed - the receiver communicating with the modem has failed receiverDisabled - the receiver communicating with the modem has been disabled receiverDeleted - the receiver communicating with the modem has beeb deleted channelDeleted - a channel has changed on the reciver that has caused the modem to deregister channelErrors - deregistered due to unacceptable amount of channel errors incompleteReg - deregistered due to incomplete registration profileUpdateComplete - deregistered after profile update skeyFailure - deregistered due to session key failure dnChanChangeFailure - due to downstream transmission channel change failure noDeregReason - no deregistration reason available powerTolerance - power ranging corrections were out of tolerance freqTolerance - frequency ranging corrections were out of tolerance timingTolerance - timing ranging correction were out of tolerance rangingTolerance - multiple ranging corrections were out of tolerance noResponseUCC - modem did not respond to the UCC request This is a place holder for the modem deregistration reason. This should return ZERO when read. This just allows us to include a deregistration reason in the modem deregistration trap varbind. " ::= { rdnCmtsMiscObjects 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4981.2.2.9.0 | rdnModemDeregReason | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4981.2.2.1 | rdnCmtsSaveConfig | 1 | 1 | This object when set to TRUE will save the current configuration of the CMTS. When this object is read it will return FALSE |
| 1.3.6.1.4.1.4981.2.2.2 | rdnCmtsCmResetByMacAddr | 1 | 1 | The CM MAC address that the operator wants to reset. When this object is set, it will cause the CMTS to reset that CM. When thi… |
| 1.3.6.1.4.1.4981.2.2.3 | rdnCmtsCmResetByIpAddr | 1 | 1 | The CM IP address that the operator wants to reset. When this object is set, it will cause the CMTS to reset that CM. When this… |
| 1.3.6.1.4.1.4981.2.2.4 | rdnCmtsCmResetAll | 1 | 1 | This object when set to TRUE will cause the CMTS to reset all the CM that are registered with this CMTS. When this object is rea… |
| 1.3.6.1.4.1.4981.2.2.5 | rdnCmtsHostAuthControl | 1 | 1 | This object is used to add or delete entry in CMTS host authorization table. The first octet is for action, add (1) or delete (2… |
| 1.3.6.1.4.1.4981.2.2.6 | rdnCmtsModemAgingTimer | 1 | 1 | The Time in minutes of modem inactivity after which the modem is deleted from the registration table. The minimum is 10 minutes a… |
| 1.3.6.1.4.1.4981.2.2.7 | rdnCmtsCpeToCmObject | 1 | 4 | None |
| 1.3.6.1.4.1.4981.2.2.8 | rdnIfCmtsCmStatusTable | 1 | 7 | This table is an extension of the docsIfCmtsCmStatusTable. It provides additional information about the CM. |
| 1.3.6.1.4.1.4981.2.2.10 | rdnDevCmtsTraps | 4 | 4 | None |
| 1.3.6.1.4.1.4981.2.2.11 | rdnModemRegIndex | 1 | 1 | This is place holder for CMId which is the index to the CM table. This table WILL contain the CM information. Right now the tabl… |
| 1.3.6.1.4.1.4981.2.2.12 | rdnCmToCpeTable | 1 | 4 | This table provides the information about the CPEs attached to the CM. |