Specifies the maximum threshold for the number of consecutive miss
counts during a polling cycle. If the flap miss counts goes over
this threshold, the modem will be added into the flap list.
Polling is maintained between the CMTS and the cable modem
every 10 seconds. The flapMissThreshold specifies the maximum
number of consecutive missed counts during one station maintenance
poll interval. If there are more than 16 consecutive miss counts
during one polling cycle, the modem will de-insert and attempt to
range again.
The value ranges from 1 to 12 consecutive counts.
The default value is 6.
Parsed from file RDN-CABLE-SPECTRUM.mib.txt
Company: None
Module: RDN-CABLE-SPECTRUM-MIB
Specifies the maximum threshold for the number of consecutive miss
counts during a polling cycle. If the flap miss counts goes over
this threshold, the modem will be added into the flap list.
Polling is maintained between the CMTS and the cable modem
every 10 seconds. The flapMissThreshold specifies the maximum
number of consecutive missed counts during one station maintenance
poll interval. If there are more than 16 consecutive miss counts
during one polling cycle, the modem will de-insert and attempt to
range again.
The value ranges from 1 to 12 consecutive counts.
The default value is 6.
Parsed from file RDN-CABLE-SPECTRUM-MIB.mib
Module: RDN-CABLE-SPECTRUM-MIB
Vendor: RiverDelta Networks
Module: RDN-CABLE-SPECTRUM-MIB
[Automatically extracted from oidview.com]
flapMissThreshold OBJECT-TYPE SYNTAX Integer32 (1..12) UNITS "modem" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum threshold for the number of consecutive miss counts during a polling cycle. If the flap miss counts goes over this threshold, the modem will be added into the flap list. Polling is maintained between the CMTS and the cable modem every 10 seconds. The flapMissThreshold specifies the maximum number of consecutive missed counts during one station maintenance poll interval. If there are more than 16 consecutive miss counts during one polling cycle, the modem will de-insert and attempt to range again. The value ranges from 1 to 12 consecutive counts. The default value is 6." DEFVAL { 6 } ::= { rdnFlapCmCmtsStatusEntry 6 }
flapMissThreshold OBJECT-TYPE SYNTAX Integer32 (1..12) UNITS "modem" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum threshold for the number of consecutive miss counts during a polling cycle. If the flap miss counts goes over this threshold, the modem will be added into the flap list. Polling is maintained between the CMTS and the cable modem every 10 seconds. The flapMissThreshold specifies the maximum number of consecutive missed counts during one station maintenance poll interval. If there are more than 16 consecutive miss counts during one polling cycle, the modem will de-insert and attempt to range again. The value ranges from 1 to 12 consecutive counts. The default value is 6." DEFVAL { 6 } ::= { rdnFlapCmCmtsStatusEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4981.6.1.1.1.1.1 | flapCmCmtsIfIndex | 0 | 0 | The CMTS Interface Index. |
| 1.3.6.1.4.1.4981.6.1.1.1.1.2 | flapListMaxSize | 0 | 0 | The maximum number of flap modems. The user could configure this number according to the number of downstreams and the number of … |
| 1.3.6.1.4.1.4981.6.1.1.1.1.3 | flapListCurrentSize | 0 | 0 | The current number of modems in the flap list. Its value will be less than or equal to flapListMaxSize. |
| 1.3.6.1.4.1.4981.6.1.1.1.1.4 | flapAgingOutTime | 0 | 0 | The age out time in minutes for modems in the flap table. The number of minutes range from 1 to 86400. The default value is 14… |
| 1.3.6.1.4.1.4981.6.1.1.1.1.5 | flapInsertionTime | 0 | 0 | The interval of time that begins when the cable modem initially ranges, reboots, and ends when it starts initial maintenance aga… |
| 1.3.6.1.4.1.4981.6.1.1.1.1.7 | flapPowerAdjThreshold | 0 | 0 | The power adjustment threshold for a CM to raise and lower it's transmit power during normal operation. When a modem's power adjus… |
| 1.3.6.1.4.1.4981.6.1.1.1.1.8 | flapListPercentageThreshold | 0 | 0 | The percentage CM miss threshold. If CM miss percentage goes over this threshold and flapListTrapEnable is set, a flap list trap … |
| 1.3.6.1.4.1.4981.6.1.1.1.1.9 | flapListTrapEnable | 0 | 0 | This object controls flap list trap. If its value is set to enabled(1), a trap will be sent out when the CM miss percentage goes … |