Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cadSysSpOperMode",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"dqossf10cms",
"(",
"0",
")",
",",
"adjrxpwrctl",
"(",
"1",
")",
",",
"enbudptcpfltr",
"(",
"2",
")",
",",
"upce",
"(",
"3",
")",
",",
"use16ForDSPeakTrafficRate",
"(",
"4",
")",
",",
"cpeNacksForceCmReset",
"(",
"5",
")",
",",
"loadBalUnbondedVoipOn",
"(",
"6",
")",
",",
"upDownTrapIfDescrOff",
"(",
"7",
")",
",",
"ofdmSparingCleanupOff",
"(",
"8",
")",
",",
"limitUsRngRspFreqOff",
"(",
"9",
")",
",",
"reserved10",
"(",
"10",
")",
",",
"cmstatusoperational",
"(",
"11",
")",
",",
"reserved12",
"(",
"12",
")",
",",
"docsis20test",
"(",
"13",
")",
",",
"reserved14",
"(",
"14",
")",
",",
"reserved15",
"(",
"15",
")",
",",
"reserved16",
"(",
"16",
")",
",",
"reserved17",
"(",
"17",
")",
",",
"reserved18",
"(",
"18",
")",
",",
"reserved19",
"(",
"19",
")",
",",
"reserved20",
"(",
"20",
")",
",",
"showCmFormatCVOff",
"(",
"21",
")",
",",
"bpiDynamicMulticastOff",
"(",
"22",
")",
",",
"docsis10plusOff",
"(",
"23",
")",
",",
"downstreamOverrideOn",
"(",
"24",
")",
",",
"supressDCDOff",
"(",
"25",
")",
",",
"virtualCmOff",
"(",
"26",
")",
",",
"bpiHybridOff",
"(",
"27",
")",
",",
"oneDCmDSMaxTrafBurstOn",
"(",
"28",
")",
",",
"docsis30ReqTxPolicyChkOff",
"(",
"29",
")",
",",
"reserved30",
"(",
"30",
")",
",",
"reserved31",
"(",
"31",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Special operational mode. Value of 1 indicates the mode is enabled. dqossf10cms - Allow 1.0 CMs to be stored in DocsQosServiceFlowEntry adjrxpwrctl - Allow rx power control to be adjusted by mod type usage enbudptcpfltr - Allow combining of Udp and Tcp messages in a single filter upce - Allow Upstream Packet Classifier Enforcement use16ForDSPeakTrafficRate - use the defunct TLV type 16 for DS peak traffic rate cpeNacksForceCmReset - - Force CM reset upon receiving 3 consecutive CPE NACKs loadBalUnbondedVoipOn - Allow load balancing for non-bonded voice calls limitUsRngRspFreqOff - Prevent CM from using an upstream frequency beyond 42 MHz upDownTrapIfDescrOff - Allow linkup or linkdown trap to include ifDescr ofdmSparingCleanupOff - Allow automatically reset any D3.1 CMs in a cable-mac that has an OFDM channel on that DCAM in the CM's RCS after a failover or fallback cmstatusoperational - Support DOCS-IF-MIB draft-05 (cw26)'s change to docsIfCmtsCmStatusValue, such that online modems take on a value of operational(8) at the CMTS. If disabled, operational(8) is not used and online modems take on a value of registrationComplete(6) at the CMTS. docsis20test - Allow running of DOCSIS 2.0 Tests. showCmFormatCVOff - show cable modem is formatted per CableVision's requirements if set to 0. docsis10plusOff - DOCSIS 1.0+ support is enabled if set to 0. downstreamOverrideOn - downstream overrides are disabled if this is set to 0. supressDCDOff - DCDs are suppressed if set to 0. virtualCmOff - support for virtual modems is enabled if set to 0. bpiHybridOff - Allow DOCSIS 1.1 modems to operate in BPI instead of BPI+ if this is set to 0. oneDCmDSMaxTrafBurstOn - Override Max Traffic Burst for DOCSIS 1.1 modems on a 1D CAM with E6000 setting if this is set to 0. docsis30ReqTxPolicyChkOff - Override DOCSIS 3.0 checking for Request/Transmission Policy TLV on upstream flows. \"",
"DEFVAL",
"{",
"{",
"dqossf10cms",
",",
"adjrxpwrctl",
",",
"enbudptcpfltr",
",",
"use16ForDSPeakTrafficRate",
",",
"cpeNacksForceCmReset",
",",
"loadBalUnbondedVoipOn",
",",
"upDownTrapIfDescrOff",
",",
"ofdmSparingCleanupOff",
",",
"limitUsRngRspFreqOff",
",",
"reserved10",
",",
"cmstatusoperational",
",",
"reserved12",
",",
"reserved14",
",",
"reserved15",
",",
"reserved16",
",",
"reserved17",
",",
"reserved18",
",",
"reserved19",
",",
"reserved20",
",",
"showCmFormatCVOff",
",",
"bpiDynamicMulticastOff",
",",
"docsis10plusOff",
",",
"downstreamOverrideOn",
",",
"supressDCDOff",
",",
"virtualCmOff",
",",
"bpiHybridOff",
",",
"oneDCmDSMaxTrafBurstOn",
",",
"docsis30ReqTxPolicyChkOff",
",",
"reserved30",
",",
"reserved31",
"}",
"}",
"::=",
"{",
"cadSysParams",
"26",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"dqossf10cms",
0
],
[
"adjrxpwrctl",
1
],
[
"enbudptcpfltr",
2
],
[
"upce",
3
],
[
"use16ForDSPeakTrafficRate",
4
],
[
"cpeNacksForceCmReset",
5
],
[
"loadBalUnbondedVoipOn",
6
],
[
"upDownTrapIfDescrOff",
7
],
[
"ofdmSparingCleanupOff",
8
],
[
"limitUsRngRspFreqOff",
9
],
[
"reserved10",
10
],
[
"cmstatusoperational",
11
],
[
"reserved12",
12
],
[
"docsis20test",
13
],
[
"reserved14",
14
],
[
"reserved15",
15
],
[
"reserved16",
16
],
[
"reserved17",
17
],
[
"reserved18",
18
],
[
"reserved19",
19
],
[
"reserved20",
20
],
[
"showCmFormatCVOff",
21
],
[
"bpiDynamicMulticastOff",
22
],
[
"docsis10plusOff",
23
],
[
"downstreamOverrideOn",
24
],
[
"supressDCDOff",
25
],
[
"virtualCmOff",
26
],
[
"bpiHybridOff",
27
],
[
"oneDCmDSMaxTrafBurstOn",
28
],
[
"docsis30ReqTxPolicyChkOff",
29
],
[
"reserved30",
30
],
[
"reserved31",
31
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Special operational mode. Value of 1 indicates the mode is enabled. dqossf10cms - Allow 1.0 CMs to be stored in DocsQosServiceFlowEntry adjrxpwrctl - Allow rx power control to be adjusted by mod type usage enbudptcpfltr - Allow combining of Udp and Tcp messages in a single filter upce - Allow Upstream Packet Classifier Enforcement use16ForDSPeakTrafficRate - use the defunct TLV type 16 for DS peak traffic rate cpeNacksForceCmReset - - Force CM reset upon receiving 3 consecutive CPE NACKs loadBalUnbondedVoipOn - Allow load balancing for non-bonded voice calls limitUsRngRspFreqOff - Prevent CM from using an upstream frequency beyond 42 MHz upDownTrapIfDescrOff - Allow linkup or linkdown trap to include ifDescr ofdmSparingCleanupOff - Allow automatically reset any D3.1 CMs in a cable-mac that has an OFDM channel on that DCAM in the CM's RCS after a failover or fallback cmstatusoperational - Support DOCS-IF-MIB draft-05 (cw26)'s change to docsIfCmtsCmStatusValue, such that online modems take on a value of operational(8) at the CMTS. If disabled, operational(8) is not used and online modems take on a value of registrationComplete(6) at the CMTS. docsis20test - Allow running of DOCSIS 2.0 Tests. showCmFormatCVOff - show cable modem is formatted per CableVision's requirements if set to 0. docsis10plusOff - DOCSIS 1.0+ support is enabled if set to 0. downstreamOverrideOn - downstream overrides are disabled if this is set to 0. supressDCDOff - DCDs are suppressed if set to 0. virtualCmOff - support for virtual modems is enabled if set to 0. bpiHybridOff - Allow DOCSIS 1.1 modems to operate in BPI instead of BPI+ if this is set to 0. oneDCmDSMaxTrafBurstOn - Override Max Traffic Burst for DOCSIS 1.1 modems on a 1D CAM with E6000 setting if this is set to 0. docsis30ReqTxPolicyChkOff - Override DOCSIS 3.0 checking for Request/Transmission Policy TLV on upstream flows."
],
null,
null,
null,
[
"DEFVAL",
[
"BitNames",
[
"dqossf10cms",
"adjrxpwrctl",
"enbudptcpfltr",
"use16ForDSPeakTrafficRate",
"cpeNacksForceCmReset",
"loadBalUnbondedVoipOn",
"upDownTrapIfDescrOff",
"ofdmSparingCleanupOff",
"limitUsRngRspFreqOff",
"reserved10",
"cmstatusoperational",
"reserved12",
"reserved14",
"reserved15",
"reserved16",
"reserved17",
"reserved18",
"reserved19",
"reserved20",
"showCmFormatCVOff",
"bpiDynamicMulticastOff",
"docsis10plusOff",
"downstreamOverrideOn",
"supressDCDOff",
"virtualCmOff",
"bpiHybridOff",
"oneDCmDSMaxTrafBurstOn",
"docsis30ReqTxPolicyChkOff",
"reserved30",
"reserved31"
]
]
]
]
}