Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hiscomY1564ControlTestEceTestEceUni",
"OBJECT-TYPE",
"SYNTAX",
"HISCOMInterfaceIndex",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"If the ECE under test can be reached from multiple UNI ports, this one points out the one to be used. Leave at 0 to have the Y.1564 module auto-pick a port. This is useful if you know that the ECE only can be reached from one single UNI, or you don't care which UNI to use, as long as the ECE can be reached through the chosen UNI. If set to 0 and it turns out that the ECE can be reached from multiple UNIs, the software will pick the lowest numbered UNI. If set to a UNI different from 0, and the ECE is not reachable from that UNI, the test will fail. Only 0 and port ifindex type are allowed. Other interface indices will result in an error.\"",
"::=",
"{",
"hiscomY1564ControlTestEceTestEntry",
"4",
"}"
],
"syntax_tree": [
[
"row",
"HISCOMInterfaceIndex"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If the ECE under test can be reached from multiple UNI ports, this one points out the one to be used. Leave at 0 to have the Y.1564 module auto-pick a port. This is useful if you know that the ECE only can be reached from one single UNI, or you don't care which UNI to use, as long as the ECE can be reached through the chosen UNI. If set to 0 and it turns out that the ECE can be reached from multiple UNIs, the software will pick the lowest numbered UNI. If set to a UNI different from 0, and the ECE is not reachable from that UNI, the test will fail. Only 0 and port ifindex type are allowed. Other interface indices will result in an error."
],
null,
null,
null,
null
]
}