OID reference
1.3.6.1.4.1.52.259.10.3.4.2.1.1.7
The number of frames received by the port that were longer than 1518 bytes.
Identification
{1 3 6 1 4 1 52 259 10 3 4 2 1 1 7}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ELH100-MIB, the row index consists of these components in order:
switchPortStatsGroupID (INTEGER): one numeric subidentifier for the non-negative value.switchPortStatsID (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.52.259.10.3.4.2.1.1.7.<switchPortStatsGroupID>.<switchPortStatsID>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.52.259.10.3.4.2.1.1.7
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Parsed from ELH100-MIB.mib · ELH100-MIB
Source file: Download elh100-mib.txt · Publisher's file
Vendor MIB copy from the Netdisco archive.
Related source files and packages:
Source file: Download ELH100-MIB · Publisher's file
Vendor MIB copy from the Observium Community archive.
Related source files and packages:
Source file: Download ELH100-MIB.mib
Historical records
switchPortFramesTooLong OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames received by the port that were longer
than 1518 bytes."
::= { switchPortStatsEntry 7 }
switchPortFramesTooLong OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames received by the port that were longer
than 1518 bytes."
::= { switchPortStatsEntry 7 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.1 | switchPortStatsGroupID | 0 | 0 | The group ID of the switch module port being referenced. If the group is not present, or if there is no switch module installed … |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.2 | switchPortStatsID | 0 | 0 | The port ID of the switch module port being referenced. Port 1 is always the internal 100Mbps port. Port 2 is always the inter… |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.3 | switchPortReadableFrames | 0 | 0 | The number of valid frames received by the port. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.4 | switchPortReadableOctets | 0 | 0 | The number of octets (bytes) in all valid frames received by the port. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.5 | switchPortFCSErrors | 0 | 0 | The number of valid-length frames received by the port that had FCS (frame check sequence) errors. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.6 | switchPortAlignmentErrors | 0 | 0 | The number of valid-length frames received by the port that had alignment errors. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.8 | switchPortShortEvents | 0 | 0 | The number of frames received by the port that were shorter than 82 bits. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.9 | switchPortRunts | 0 | 0 | The number of frames received by the port that were longer than 82 bits but shorter than 512 bits (64 bytes). |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.10 | switchPortCollisions | 0 | 0 | The number of collisions detected on the port. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.11 | switchPortLateEvents | 0 | 0 | The number of collisions detected on the port that occurred later than 512 bit-times into the transmission of a packet. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.12 | switchPortVeryLongEvents | 0 | 0 | The number of times any activity continued for more than 4 to 7.5 milliseconds. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.13 | switchPortDataRateMismatches | 0 | 0 | The number of times the incoming data rate mismatched the local clock source enough to cause a FIFO overflow or underflow. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.14 | switchPortAutoPartitions | 0 | 0 | The number of times this port was auto-partitioned by the hardware. In 100Mbps mode, a port auto-partitions when it detects more… |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.15 | switchPortBroadcastPackets | 0 | 0 | The number of good broadcast frames received by the port. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.16 | switchPortMulticastPackets | 0 | 0 | The number of good multicast (not broadcast) frames received by the port. |
| 1.3.6.1.4.1.52.259.10.3.4.2.1.1.17 | switchPortIsolates | 0 | 0 | The number of times this port was auto-isolated by the hardware. This occurs only during 100Mbps operation. A port auto-isolate… |