The current operational state of the interface. The
testing(3) state indicates that no operational packets
can be passed. If ctDs0ifAdminStatus is down(2) then
ctDs0ifOperStatus should be down(2). If ctDs0ifAdminStatus is
changed to up(1) then ctDs0ifOperStatus should change to
up(1) if the interface is ready to transmit and
receive network traffic; it should change to
dormant(5) if the interface is waiting for external
actions (such as a serial line waiting for an
incomming connection); it should remain in the down(2)
state if and only if there is a fault that prevents if
from going to the up(1) state.
Parsed from file ct-ds0entmib.txt
Company: None
Module: CT-DS0ent-MIB
The current operational state of the interface. The
testing(3) state indicates that no operational packets
can be passed. If ctDs0ifAdminStatus is down(2) then
ctDs0ifOperStatus should be down(2). If ctDs0ifAdminStatus is
changed to up(1) then ctDs0ifOperStatus should change to
up(1) if the interface is ready to transmit and
receive network traffic; it should change to
dormant(5) if the interface is waiting for external
actions (such as a serial line waiting for an
incomming connection); it should remain in the down(2)
state if and only if there is a fault that prevents if
from going to the up(1) state.
Parsed from file CT-DS0ent-MIB.mib
Module: CT-DS0ent-MIB
ctDs0ifOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ctDs0ifAdminStatus is down(2) then ctDs0ifOperStatus should be down(2). If ctDs0ifAdminStatus is changed to up(1) then ctDs0ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incomming connection); it should remain in the down(2) state if and only if there is a fault that prevents if from going to the up(1) state." ::= { ctDs0ifEntry 8 }
Vendor: Enterasys Networks Inc.
Module: CT-DS0ent-MIB
[Automatically extracted from oidview.com]
ctDs0ifOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ctDs0ifAdminStatus is down(2) then ctDs0ifOperStatus should be down(2). If ctDs0ifAdminStatus is changed to up(1) then ctDs0ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incomming connection); it should remain in the down(2) state if and only if there is a fault that prevents if from going to the up(1) state." ::= { ctDs0ifEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4497.20.2.1.1 | ctDs0ifIndex | 0 | 0 | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. … |
| 1.3.6.1.4.1.52.4497.20.2.1.2 | ctDs0ifDescr | 0 | 0 | A textual string containing information about the interface. This string should include the name of the manufacturer, the produc… |
| 1.3.6.1.4.1.52.4497.20.2.1.3 | ctDs0ifType | 0 | 0 | ctDs0iftype |
| 1.3.6.1.4.1.52.4497.20.2.1.4 | ctDs0ifMtu | 0 | 0 | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for… |
| 1.3.6.1.4.1.52.4497.20.2.1.5 | ctDs0ifSpeed | 0 | 0 | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those … |
| 1.3.6.1.4.1.52.4497.20.2.1.6 | ctDs0ifPhysAddress | 0 | 0 | The interface's address at its protocol sub-layer. The interface's media-specific MIB must define the bit and byte ordering and f… |
| 1.3.6.1.4.1.52.4497.20.2.1.7 | ctDs0ifAdminStatus | 0 | 0 | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed sy… |
| 1.3.6.1.4.1.52.4497.20.2.1.9 | ctDs0ifLastChange | 0 | 0 | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior t… |
| 1.3.6.1.4.1.52.4497.20.2.1.10 | ctDs0ifInOctets | 0 | 0 | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.52.4497.20.2.1.11 | ctDs0ifInUcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast … |
| 1.3.6.1.4.1.52.4497.20.2.1.12 | ctDs0ifInNUcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast addr… |
| 1.3.6.1.4.1.52.4497.20.2.1.13 | ctDs0ifInDiscards | 0 | 0 | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being de… |
| 1.3.6.1.4.1.52.4497.20.2.1.14 | ctDs0ifInErrors | 0 | 0 | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a h… |
| 1.3.6.1.4.1.52.4497.20.2.1.15 | ctDs0ifInUnknownProtos | 0 | 0 | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or un… |
| 1.3.6.1.4.1.52.4497.20.2.1.16 | ctDs0ifOutOctets | 0 | 0 | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.52.4497.20.2.1.17 | ctDs0ifOutUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or … |
| 1.3.6.1.4.1.52.4497.20.2.1.18 | ctDs0ifOutNUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broa… |
| 1.3.6.1.4.1.52.4497.20.2.1.19 | ctDs0ifOutDiscards | 0 | 0 | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being t… |
| 1.3.6.1.4.1.52.4497.20.2.1.20 | ctDs0ifOutErrors | 0 | 0 | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-or… |
| 1.3.6.1.4.1.52.4497.20.2.1.21 | ctDs0ifOutQLen | 0 | 0 | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.52.4497.20.2.1.22 | ctDs0ifSpecific | 0 | 0 | A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this … |