{1 3 6 1 4 1 52642 1 1 10 2 10 1 13 1 1}
The ap's address at its protocol sub-layer. The ap's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
Status in source: current.
Names: fsApPhysAddress
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsApPhysAddress",
"OBJECT-TYPE",
"SYNTAX",
"PhysAddress",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The ap's address at its protocol sub-layer. The ap's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.\"",
"::=",
"{",
"fsApIfEntry",
"1",
"}"
],
"syntax_tree": [
[
"row",
"PhysAddress"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The ap's address at its protocol sub-layer. The ap's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FS-INTERFACE-MIB
fsApPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap's address at its protocol sub-layer.
The ap's media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do not have such an address
(e.g., a serial line), this object should contain an
octet string of zero length."
::= { fsApIfEntry 1 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:17.845940+00:00.
Module: FS-INTERFACE-MIB
fsApPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap's address at its protocol sub-layer.
The ap's media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do not have such an address
(e.g., a serial line), this object should contain an
octet string of zero length."
::= { fsApIfEntry 1 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex', 'ifDescr', 'ifAdminStatus', 'ifOperStatus'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in 20240129093459svlvsn.zip.
Downloaded: 2026-10-24T13:35:05.059057+00:00.
Module: FS-INTERFACE-MIB
fsApPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap's address at its protocol sub-layer.
The ap's media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do not have such an address
(e.g., a serial line), this object should contain an
octet string of zero length."
::= { fsApIfEntry 1 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in nc8200-and-nc8400-series-swithes-snmp-mib-files.zip.
Same file in n5860-and-n8560-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:06.496038+00:00.
Module: FS-INTERFACE-MIB
fsApPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap's address at its protocol sub-layer.
The ap's media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do not have such an address
(e.g., a serial line), this object should contain an
octet string of zero length."
::= { fsApIfEntry 1 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in s3100-16tf-switch-snmp-mib-files.zip.
Same file in s5860-series-swithes-snmp-mib-files.zip.
Same file in s3910-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:09.247003+00:00.