{1 3 6 1 4 1 52642 1 1 10 2 10 1 13 1 6}
An estimate of the interface's current bandwidth in units of Mbits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.For a sub-layer which has no concept of bandwidth, this object should be zero.
Status in source: current.
Names: fsApIfSpeed
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsApIfSpeed",
"OBJECT-TYPE",
"SYNTAX",
"Gauge",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"An estimate of the interface's current bandwidth in units of Mbits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.For a sub-layer which has no concept of bandwidth, this object should be zero.\"",
"::=",
"{",
"fsApIfEntry",
"6",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Gauge"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"An estimate of the interface's current bandwidth in units of Mbits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.For a sub-layer which has no concept of bandwidth, this object should be zero."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FS-INTERFACE-MIB
fsApIfSpeed OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current bandwidth in units of
Mbits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth.For a sub-layer which
has no concept of bandwidth, this object should be
zero."
::= { fsApIfEntry 6 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:17.845940+00:00.
Module: FS-INTERFACE-MIB
fsApIfSpeed OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current bandwidth in units of
Mbits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth.For a sub-layer which
has no concept of bandwidth, this object should be
zero."
::= { fsApIfEntry 6 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex', 'ifDescr', 'ifAdminStatus', 'ifOperStatus'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in 20240129093459svlvsn.zip.
Downloaded: 2026-10-24T13:35:05.059057+00:00.
Module: FS-INTERFACE-MIB
fsApIfSpeed OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current bandwidth in units of
Mbits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth.For a sub-layer which
has no concept of bandwidth, this object should be
zero."
::= { fsApIfEntry 6 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in nc8200-and-nc8400-series-swithes-snmp-mib-files.zip.
Same file in n5860-and-n8560-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:06.496038+00:00.
Module: FS-INTERFACE-MIB
fsApIfSpeed OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current bandwidth in units of
Mbits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth.For a sub-layer which
has no concept of bandwidth, this object should be
zero."
::= { fsApIfEntry 6 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in s3100-16tf-switch-snmp-mib-files.zip.
Same file in s5860-series-swithes-snmp-mib-files.zip.
Same file in s3910-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:09.247003+00:00.