{1 3 6 1 4 1 52642 1 1 10 2 48 1 2 1 24}
This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0) is reserved, and should not be used.
Status in source: current.
Names: fsBfdSessDesiredMinTxInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsBfdSessDesiredMinTxInterval",
"OBJECT-TYPE",
"SYNTAX",
"FSBfdIntervalTC",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0) is reserved, and should not be used.\"",
"REFERENCE",
"\"Section 4.1 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012.\"",
"::=",
"{",
"fsBfdSessEntry",
"24",
"}"
],
"syntax_tree": [
[
"row",
"FSBfdIntervalTC"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0) is reserved, and should not be used."
],
[
"REFERENCE",
"Section 4.1 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012."
],
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FS-BFD-MIB
fsBfdSessDesiredMinTxInterval OBJECT-TYPE
SYNTAX FSBfdIntervalTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and should not be used."
REFERENCE
"Section 4.1 from Katz, D. and D. Ward, Bidirectional
Forwarding Detection (BFD), RFC 5880, June 2012."
::= { fsBfdSessEntry 24 }{'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'TimeStamp', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetPortNumber']}Related source files and packages:
Downloaded: 2026-10-23T19:25:17.871939+00:00.
Module: FS-BFD-MIB
fsBfdSessDesiredMinTxInterval OBJECT-TYPE
SYNTAX FSBfdIntervalTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and should not be used."
REFERENCE
"Section 4.1 from Katz, D. and D. Ward, Bidirectional
Forwarding Detection (BFD), RFC 5880, June 2012."
::= { fsBfdSessEntry 24 }{'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndexOrZero'], 'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'TimeStamp', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetPortNumber']}Related source files and packages:
Same file in 20240129093459svlvsn.zip.
Downloaded: 2026-10-24T13:35:05.001058+00:00.
Module: FS-BFD-MIB
fsBfdSessDesiredMinTxInterval OBJECT-TYPE
SYNTAX FSBfdIntervalTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and should not be used."
REFERENCE
"Section 4.1 from Katz, D. and D. Ward, Bidirectional
Forwarding Detection (BFD), RFC 5880, June 2012."
::= { fsBfdSessEntry 24 }{'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'TimeStamp', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetPortNumber']}Related source files and packages:
Same file in nc8200-and-nc8400-series-swithes-snmp-mib-files.zip.
Same file in n5860-and-n8560-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:06.451039+00:00.
Module: FS-BFD-MIB
fsBfdSessDesiredMinTxInterval OBJECT-TYPE
SYNTAX FSBfdIntervalTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and should not be used."
REFERENCE
"Section 4.1 from Katz, D. and D. Ward, Bidirectional
Forwarding Detection (BFD), RFC 5880, June 2012."
::= { fsBfdSessEntry 24 }{'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetPortNumber']}Related source files and packages:
Same file in s3100-16tf-switch-snmp-mib-files.zip.
Same file in s5860-series-swithes-snmp-mib-files.zip.
Same file in s3910-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:09.188004+00:00.