{1 3 6 1 4 1 52642 1 1 10 2 48 1 2 1 25}
This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) can be specified when the transmitting system does not want the remote system to send any periodic BFD control packets.
Status in source: current.
Names: fsBfdSessReqMinRxInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsBfdSessReqMinRxInterval",
"OBJECT-TYPE",
"SYNTAX",
"FSBfdIntervalTC",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) can be specified when the transmitting system does not want the remote system to send any periodic BFD control packets.\"",
"REFERENCE",
"\"Section 4.1 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012.\"",
"::=",
"{",
"fsBfdSessEntry",
"25",
"}"
],
"syntax_tree": [
[
"row",
"FSBfdIntervalTC"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) can be specified when the transmitting system does not want the remote system to send any periodic BFD control packets."
],
[
"REFERENCE",
"Section 4.1 from Katz, D. and D. Ward, Bidirectional Forwarding Detection (BFD), RFC 5880, June 2012."
],
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FS-BFD-MIB
fsBfdSessReqMinRxInterval OBJECT-TYPE
SYNTAX FSBfdIntervalTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not want the remote system to send any periodic BFD
control packets."
REFERENCE
"Section 4.1 from Katz, D. and D. Ward, Bidirectional
Forwarding Detection (BFD), RFC 5880, June 2012."
::= { fsBfdSessEntry 25 }{'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'TimeStamp', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetPortNumber']}Related source files and packages:
Downloaded: 2026-10-23T19:25:17.871939+00:00.
Module: FS-BFD-MIB
fsBfdSessReqMinRxInterval OBJECT-TYPE
SYNTAX FSBfdIntervalTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not want the remote system to send any periodic BFD
control packets."
REFERENCE
"Section 4.1 from Katz, D. and D. Ward, Bidirectional
Forwarding Detection (BFD), RFC 5880, June 2012."
::= { fsBfdSessEntry 25 }{'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndexOrZero'], 'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'TimeStamp', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetPortNumber']}Related source files and packages:
Same file in 20240129093459svlvsn.zip.
Downloaded: 2026-10-24T13:35:05.001058+00:00.
Module: FS-BFD-MIB
fsBfdSessReqMinRxInterval OBJECT-TYPE
SYNTAX FSBfdIntervalTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not want the remote system to send any periodic BFD
control packets."
REFERENCE
"Section 4.1 from Katz, D. and D. Ward, Bidirectional
Forwarding Detection (BFD), RFC 5880, June 2012."
::= { fsBfdSessEntry 25 }{'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'TimeStamp', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetPortNumber']}Related source files and packages:
Same file in nc8200-and-nc8400-series-swithes-snmp-mib-files.zip.
Same file in n5860-and-n8560-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:06.451039+00:00.
Module: FS-BFD-MIB
fsBfdSessReqMinRxInterval OBJECT-TYPE
SYNTAX FSBfdIntervalTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not want the remote system to send any periodic BFD
control packets."
REFERENCE
"Section 4.1 from Katz, D. and D. Ward, Bidirectional
Forwarding Detection (BFD), RFC 5880, June 2012."
::= { fsBfdSessEntry 25 }{'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetPortNumber']}Related source files and packages:
Same file in s3100-16tf-switch-snmp-mib-files.zip.
Same file in s5860-series-swithes-snmp-mib-files.zip.
Same file in s3910-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:09.188004+00:00.