Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"zhoneVdslPhysCurrStatus",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"noDefect",
"(",
"0",
")",
",",
"lossOfFraming",
"(",
"1",
")",
",",
"lossOfSignal",
"(",
"2",
")",
",",
"lossOfPower",
"(",
"3",
")",
",",
"lossOfSignalQuality",
"(",
"4",
")",
",",
"lossOfLink",
"(",
"5",
")",
",",
"dataInitFailure",
"(",
"6",
")",
",",
"configInitFailure",
"(",
"7",
")",
",",
"protocolInitFailure",
"(",
"8",
")",
",",
"noPeerVtuPresent",
"(",
"9",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Indicates current state of the Vtu line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There are no defects on the line. 1 lossOfFraming Vtu failure due to not receiving a valid frame. 2 lossOfSignal Vtu failure due to not receiving signal. 3 lossOfPower Vtu failure due to loss of power. 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. 5 lossOfLink Vtu failure due to inability to link with peer Vtu. Set whenever the transceiver is in the 'Warm Start' state. 6 dataInitFailure Vtu failure during initialization due to bit errors corrupting startup exchange data. 7 configInitFailure Vtu failure during initialization due to peer Vtu not able to support requested configuration. 8 protocolInitFailure Vtu failure during initialization due to incompatible protocol used by the peer Vtu. 9 noPeerVtuPresent Vtu failure during initialization due to no activation sequence detected from peer Vtu. This is intended to supplement ifOperStatus.\"",
"REFERENCE",
"\"T1E1.4/2000-009R3, Part 1, common spec\"",
"::=",
"{",
"zhoneVdslPhysEntry",
"7",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"noDefect",
0
],
[
"lossOfFraming",
1
],
[
"lossOfSignal",
2
],
[
"lossOfPower",
3
],
[
"lossOfSignalQuality",
4
],
[
"lossOfLink",
5
],
[
"dataInitFailure",
6
],
[
"configInitFailure",
7
],
[
"protocolInitFailure",
8
],
[
"noPeerVtuPresent",
9
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Indicates current state of the Vtu line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There are no defects on the line. 1 lossOfFraming Vtu failure due to not receiving a valid frame. 2 lossOfSignal Vtu failure due to not receiving signal. 3 lossOfPower Vtu failure due to loss of power. 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. 5 lossOfLink Vtu failure due to inability to link with peer Vtu. Set whenever the transceiver is in the 'Warm Start' state. 6 dataInitFailure Vtu failure during initialization due to bit errors corrupting startup exchange data. 7 configInitFailure Vtu failure during initialization due to peer Vtu not able to support requested configuration. 8 protocolInitFailure Vtu failure during initialization due to incompatible protocol used by the peer Vtu. 9 noPeerVtuPresent Vtu failure during initialization due to no activation sequence detected from peer Vtu. This is intended to supplement ifOperStatus."
],
[
"REFERENCE",
"T1E1.4/2000-009R3, Part 1, common spec"
],
null,
null,
null
]
}