Vendor: Telco Systems NAC
Module: EDGELINK-MIB
[Automatically extracted from oidview.com]
elDS1CM OBJECT IDENTIFIER ::= { elM13v1 1 }
elDS1CM OBJECT IDENTIFIER ::= { elM13v1 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.564.101.1.1.1 | elDS1CMTable | 1 | 11 | DS1 Configuration Management table. |
1.3.6.1.4.1.564.101.1.1.2 | elALLDS1CMLineCode | 1 | 1 | Set DS1 line code for all DS1 channels. A value Inderminate(3) will be returned if All the DS1 Channels are not set to either ds1… |
1.3.6.1.4.1.564.101.1.1.3 | elALLDS1CMLineBuildout | 1 | 1 | Select line build-out for All the DS1 lines to 0 to 133 ft, or 133 to 266 ft, 266 to 399 ft, 399 to 533 ft, or 533 to 655 ft. |
1.3.6.1.4.1.564.101.1.1.4 | elALLDS1CMLoopbackMode | 1 | 1 | Set the DS1 loopback mode to Line, Terminal, Remote, or None for All the DS1 Channels. In M13 Mode, issuing a DS1 Remote Terminal… |
1.3.6.1.4.1.564.101.1.1.5 | elALLDS1CMServiceMode | 1 | 1 | Set the DS1 service mode for All DS1 channels to in-service or out-of-service. Certain service effecting operations can not be in… |
1.3.6.1.4.1.564.101.1.1.6 | elALLDS1CMInterfaceEquipped | 1 | 1 | Set All the DS1 Channels to 'equipped' or 'unequipped' state. No PM or FM operations will occur on an unequipped DS1 interface. A… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.564.101.1.2 | elCM | 13 | 26 | None |
1.3.6.1.4.1.564.101.1.3 | elCMIfc | 5 | 18 | None |
1.3.6.1.4.1.564.101.1.4 | elPM | 2 | 4 | None |
1.3.6.1.4.1.564.101.1.5 | elDS1PM | 2 | 4 | None |
1.3.6.1.4.1.564.101.1.6 | elDS1PMCur | 1 | 5 | None |
1.3.6.1.4.1.564.101.1.7 | elDS1PMIvl | 1 | 6 | None |
1.3.6.1.4.1.564.101.1.8 | elDS1PMTot | 1 | 5 | None |
1.3.6.1.4.1.564.101.1.9 | elFM | 4 | 8 | None |
1.3.6.1.4.1.564.101.1.10 | elFMAlmLog | 1 | 8 | None |
1.3.6.1.4.1.564.101.1.11 | elFMCurAlm | 1 | 5 | None |
1.3.6.1.4.1.564.101.1.12 | elFMTrapFields | 5 | 10 | None |