all transport channels, this field specifies the priority of the
transport channel.
OID reference
1.3.6.1.4.1.5812.6.8.1.38
If there are insufficient network resources for establishing all transport channels, this field specifies the priority of the transport channel.
Identification
{1 3 6 1 4 1 5812 6 8 1 38}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: circuitSrcIpAddr, circuitSrcInterfaceNum, circuitSrcConnectionID.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.5812.6.8.1.38
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Historical records
circuitSetupPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If there are insufficient network resources for establishing
all transport channels, this field specifies the priority of the
transport channel."
::= { circuitEntry 38 }
circuitSetupPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If there are insufficient network resources for establishing
all transport channels, this field specifies the priority of the
transport channel."
::= { circuitEntry 38 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5812.6.8.1.1 | circuitSrcIpAddr | 0 | 0 | IP address of the source circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.2 | circuitSrcInterfaceNum | 0 | 0 | The interface number of the source circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.3 | circuitSrcConnectionID | 0 | 0 | Connection Identifier of the source circuit endpoint. Based on the protocol type, further information may be required to complete… |
| 1.3.6.1.4.1.5812.6.8.1.4 | circuitSrcDescString | 0 | 0 | Textual description of the source side of the circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.5 | circuitDestIpAddr | 0 | 0 | IP address of the destination circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.6 | circuitDestInterfaceNum | 0 | 0 | The interface number of the destination circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.7 | circuitDestConnectionID | 0 | 0 | Connection Identifier of the destination circuit endpoint. Based on the protocol type, further information may be required to com… |
| 1.3.6.1.4.1.5812.6.8.1.8 | circuitDestDescString | 0 | 0 | Textual description of the destination side of the circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.9 | circuitName | 0 | 0 | CircuitName is a unique name given to a circuit. |
| 1.3.6.1.4.1.5812.6.8.1.10 | circuitID | 0 | 0 | CircuitID is a unique ID given to a circuit. It is equal to the TC-ID in the PM. |
| 1.3.6.1.4.1.5812.6.8.1.11 | circuitRowStatus | 0 | 0 | Indicates if a row has been created or deleted. See SNMPv2-TC for complete description. |
| 1.3.6.1.4.1.5812.6.8.1.12 | circuitReasonText | 0 | 0 | Provides the reason for the error indicated. |
| 1.3.6.1.4.1.5812.6.8.1.13 | circuitFailLocIpAddr | 0 | 0 | IP address of location where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.14 | circuitFailLocSlot1 | 0 | 0 | Slot number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.15 | circuitFailLocPort1 | 0 | 0 | Port number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.16 | circuitFailLocInterfaceNum1 | 0 | 0 | Interface number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.17 | circuitFailLocConnectionID1 | 0 | 0 | Connection Identifier of the failed circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.18 | circuitFailLocSlot2 | 0 | 0 | Slot number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.19 | circuitFailLocPort2 | 0 | 0 | Port number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.20 | circuitFailLocInterfaceNum2 | 0 | 0 | Interface number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.21 | circuitFailLocConnectionID2 | 0 | 0 | Connection Identifier of the failed circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.22 | circuitEndPoint1Protocol | 0 | 0 | Protocol determines the connectionID. |
| 1.3.6.1.4.1.5812.6.8.1.23 | circuitFwdTDType | 0 | 0 | Specifies the traffic descriptor type associated with the forward traffic descriptor parameters. The forward direction is 'into … |
| 1.3.6.1.4.1.5812.6.8.1.24 | circuitFwdTDParam1 | 0 | 0 | Parameter 1 of the forward traffic descriptor of type circuitFwdTdType. For type Ethernet, this value corresponds to CIR. For type… |
| 1.3.6.1.4.1.5812.6.8.1.25 | circuitFwdTDParam2 | 0 | 0 | Parameter 2 of the forward traffic descriptor of type circuitFwdTdType. For type Ethernet, this value corresponds to Bc. For type … |
| 1.3.6.1.4.1.5812.6.8.1.26 | circuitFwdTDParam3 | 0 | 0 | Parameter 3 of the forward traffic descriptor of type circuitFwdTdType. For type Ethernet, this value corresponds to Be. For type … |
| 1.3.6.1.4.1.5812.6.8.1.27 | circuitFwdTDParam4 | 0 | 0 | Parameter 4 of the forward traffic descriptor of type circuitFwdTdType. |
| 1.3.6.1.4.1.5812.6.8.1.28 | circuitEndPoint2Protocol | 0 | 0 | Protocol determines the connectionID. |
| 1.3.6.1.4.1.5812.6.8.1.29 | circuitBwdTDType | 0 | 0 | Specifies the traffic descriptor type associated with the backward traffic descriptor parameters. The backward direction is 'out… |
| 1.3.6.1.4.1.5812.6.8.1.30 | circuitBwdTDParam1 | 0 | 0 | Parameter 1 of the backward traffic descriptor of type circuitBwdTdType. For type Ethernet, this value corresponds to CIR. For typ… |
| 1.3.6.1.4.1.5812.6.8.1.31 | circuitBwdTDParam2 | 0 | 0 | Parameter 2 of the backward traffic descriptor of type circuitBwdTdType. For type Ethernet, this value corresponds to Bc. For type… |
| 1.3.6.1.4.1.5812.6.8.1.32 | circuitBwdTDParam3 | 0 | 0 | Parameter 3 of the backward traffic descriptor of type circuitBwdTdType. For type Ethernet, this value corresponds to Be. For type… |
| 1.3.6.1.4.1.5812.6.8.1.33 | circuitBwdTDParam4 | 0 | 0 | Parameter 4 of the backward traffic descriptor of type circuitBwdTdType. |
| 1.3.6.1.4.1.5812.6.8.1.34 | circuitClassOfService | 0 | 0 | Specifies the class of service for Data or non-TDM circuits. This value is in the range of 0-7 where 1 has the highest priority … |
| 1.3.6.1.4.1.5812.6.8.1.35 | circuitAdminState | 0 | 0 | Administrative state of the circuit. Circuits in the disabled state do not consume network resources such as bandwidth. The net… |
| 1.3.6.1.4.1.5812.6.8.1.36 | circuitOperState | 0 | 0 | Aperational state of the circuit. Circuits in the disabled state do not consume network resources such as bandwidth. The networ… |
| 1.3.6.1.4.1.5812.6.8.1.37 | circuitTimeSinceStatusChange | 0 | 0 | Gives the time (in seconds) since the most recent status change. |
| 1.3.6.1.4.1.5812.6.8.1.39 | circuitHoldPriority | 0 | 0 | If a number of transport channels of a low Setup Priority need to be cleared in order to release resources allowing for a higher… |
| 1.3.6.1.4.1.5812.6.8.1.40 | circuitIsRedundancyReqd | 0 | 0 | Specifies if the circuit is to be established over rings that are logically configured as 'protected'. A protected ring could ph… |
| 1.3.6.1.4.1.5812.6.8.1.41 | circuitPreferredEP1OptSlot | 0 | 0 | If the circuit spans one or two rings, this is the slot number of the first preferred ring. Preferred rings allow a manual over… |
| 1.3.6.1.4.1.5812.6.8.1.42 | circuitPreferredEP1OptPort | 0 | 0 | If the circuit spans one or two rings, this is the port number of the first preferred ring. |
| 1.3.6.1.4.1.5812.6.8.1.43 | circuitPreferredEP1OptVport | 0 | 0 | If the circuit spans one or two rings, this is the lambda number of the first preferred ring. |
| 1.3.6.1.4.1.5812.6.8.1.44 | circuitPreferredEP2OptSlot | 0 | 0 | If the circuit spans two rings, this is the slot number of the second preferred ring. Preferred rings allow a manual overide of … |
| 1.3.6.1.4.1.5812.6.8.1.45 | circuitPreferredEP2OptPort | 0 | 0 | If the circuit spans two rings, this is the port number of the second preferred ring. |
| 1.3.6.1.4.1.5812.6.8.1.46 | circuitPreferredEP2OptVport | 0 | 0 | If the circuit spans two rings, this is the lambda number of the second preferred ring. |
| 1.3.6.1.4.1.5812.6.8.1.47 | circuitUseAlternateRing | 0 | 0 | Allows operator to specify whether an alternate ring can be used if the preferred ring(s) fail. This requires the ability to loa… |
| 1.3.6.1.4.1.5812.6.8.1.48 | circuitInFrames | 0 | 0 | Number of frames received at the ingress point and passed on to the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.49 | circuitInDEFrames | 0 | 0 | Number of frames received at the ingress point and passed on to the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.50 | circuitInOctets | 0 | 0 | Number of octets received at the ingress point and passed on to the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.51 | circuitInDEOctets | 0 | 0 | Number of octets received at the ingress point and passed on to the circuit. |