OID reference

circuitIsRedundancyReqd

1.3.6.1.4.1.5812.6.8.1.40

Description

Specifies if the circuit is to be established over rings that are logically configured as 'protected'. A protected ring could physically be in a fault state where one fiber has failed. A circuit that requires redundancy will be established over rings logically configured as 'protected' even though the current physical…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.5812.6.8.1 (circuitEntry)
Node code
40
Node name
circuitIsRedundancyReqd
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.5812.6.8.1.40
URN notation
urn:oid:1.3.6.1.4.1.5812.6.8.1.40
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 5812 6 8 1 40}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) coriolisMibs(5812) circuit(6) circuitTable(8) circuitEntry(1) circuitIsRedundancyReqd(40)}
OID-IRI notation
  • /1/3/6/1/4/1/5812/6/8/1/40
  • /ISO/Identified-Organization/6/1/4/1/5812/6/8/1/40
  • /ISO/3/6/1/4/1/5812/6/8/1/40
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/identified-organization/dod/internet/private/enterprises/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/identified-organization/dod/internet/private/vendor-objects/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/org/dod/internet/private/enterprise/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/org/dod/internet/private/enterprises/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/org/dod/internet/private/ldap-enterprise/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/org/dod/internet/private/vendor-objects/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/iso-identified-organization/dod/internet/private/enterprise/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/iso-identified-organization/dod/internet/private/enterprises/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/iso-identified-organization/dod/internet/private/ldap-enterprise/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/iso-identified-organization/dod/internet/private/vendor-objects/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/iso-organization/dod/internet/private/enterprise/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/iso-organization/dod/internet/private/enterprises/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/iso-organization/dod/internet/private/ldap-enterprise/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd
  • /iso/iso-organization/dod/internet/private/vendor-objects/coriolisMibs/circuit/circuitTable/circuitEntry/circuitIsRedundancyReqd

SNMP properties

Value type
TruthValue
Maximum access defined by MIB
read-write
Status in MIB
current

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Specifies if the circuit is to be established over rings
that are logically configured as 'protected'. A protected
ring could physically be in a fault state where one fiber
has failed. A circuit that requires redundancy will be
established over rings logically configured as 'protected'
even though the current physical state of a protected ring
may be in a fault state.
Sources for this description

Circitor

Parsed from CIRCUIT-MIB.mib · CIRCUIT-MIB

Source file: Download CIRCUIT-MIB.mib

Browse all files from Circitor

Historical records

Additional source information

Information from OID Repository
Vendor: Coriolis Networks
Module: CIRCUIT-MIB

[Automatically extracted from oidview.com]
Information from MIBdepot
circuitIsRedundancyReqd	OBJECT-TYPE
				SYNTAX					TruthValue
				MAX-ACCESS				read-write
				STATUS					current
				DESCRIPTION
					 "Specifies if the circuit is to be established over rings 
					 that are logically configured as 'protected'.  A protected 
					 ring could physically be in a fault state where one fiber
					 has failed.  A circuit that requires redundancy will be 
					 established over rings logically configured as 'protected'
					 even though the current physical state of a protected ring
					 may be in a fault state."
				::= { circuitEntry 40 }
Information from Circitor
circuitIsRedundancyReqd	OBJECT-TYPE
				SYNTAX					TruthValue
				MAX-ACCESS				read-write
				STATUS					current
				DESCRIPTION
					 "Specifies if the circuit is to be established over rings 
					 that are logically configured as 'protected'.  A protected 
					 ring could physically be in a fault state where one fiber
					 has failed.  A circuit that requires redundancy will be 
					 established over rings logically configured as 'protected'
					 even though the current physical state of a protected ring
					 may be in a fault state."
				::= { circuitEntry 40 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.5812)

Anil Navkal

Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.5812)

Anil Navkal

Siblings (67)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.5812.6.8.1.1 circuitSrcIpAddr00 IP address of the source circuit endpoint.
1.3.6.1.4.1.5812.6.8.1.2 circuitSrcInterfaceNum00 The interface number of the source circuit endpoint.
1.3.6.1.4.1.5812.6.8.1.3 circuitSrcConnectionID00 Connection Identifier of the source circuit endpoint.
Based on the protocol type, further information may
be required to complete…
1.3.6.1.4.1.5812.6.8.1.4 circuitSrcDescString00 Textual description of the source side of the circuit endpoint.
1.3.6.1.4.1.5812.6.8.1.5 circuitDestIpAddr00 IP address of the destination circuit endpoint.
1.3.6.1.4.1.5812.6.8.1.6 circuitDestInterfaceNum00 The interface number of the destination circuit endpoint.
1.3.6.1.4.1.5812.6.8.1.7 circuitDestConnectionID00 Connection Identifier of the destination circuit endpoint.
Based on the protocol type, further information may
be required to com…
1.3.6.1.4.1.5812.6.8.1.8 circuitDestDescString00 Textual description of the destination side of the circuit endpoint.
1.3.6.1.4.1.5812.6.8.1.9 circuitName00 CircuitName is a unique name given to a circuit.
1.3.6.1.4.1.5812.6.8.1.10 circuitID00 CircuitID is a unique ID given to a circuit. It is
equal to the TC-ID in the PM.
1.3.6.1.4.1.5812.6.8.1.11 circuitRowStatus00 Indicates if a row has been created or deleted.
See SNMPv2-TC for complete description.
1.3.6.1.4.1.5812.6.8.1.12 circuitReasonText00 Provides the reason for the error indicated.
1.3.6.1.4.1.5812.6.8.1.13 circuitFailLocIpAddr00 IP address of location where circuit failure code is
encountered.
1.3.6.1.4.1.5812.6.8.1.14 circuitFailLocSlot100 Slot number where circuit failure code is
encountered.
1.3.6.1.4.1.5812.6.8.1.15 circuitFailLocPort100 Port number where circuit failure code is
encountered.
1.3.6.1.4.1.5812.6.8.1.16 circuitFailLocInterfaceNum100 Interface number where circuit failure code is
encountered.
1.3.6.1.4.1.5812.6.8.1.17 circuitFailLocConnectionID100 Connection Identifier of the failed circuit endpoint.
1.3.6.1.4.1.5812.6.8.1.18 circuitFailLocSlot200 Slot number where circuit failure code is
encountered.
1.3.6.1.4.1.5812.6.8.1.19 circuitFailLocPort200 Port number where circuit failure code is
encountered.
1.3.6.1.4.1.5812.6.8.1.20 circuitFailLocInterfaceNum200 Interface number where circuit failure code is
encountered.
1.3.6.1.4.1.5812.6.8.1.21 circuitFailLocConnectionID200 Connection Identifier of the failed circuit endpoint.
1.3.6.1.4.1.5812.6.8.1.22 circuitEndPoint1Protocol00 Protocol determines the connectionID.
1.3.6.1.4.1.5812.6.8.1.23 circuitFwdTDType00 Specifies the traffic descriptor type associated with
the forward traffic descriptor parameters. The forward
direction is 'into …
1.3.6.1.4.1.5812.6.8.1.24 circuitFwdTDParam100 Parameter 1 of the forward traffic descriptor of
type circuitFwdTdType.
For type Ethernet, this value corresponds to CIR.
For type…
1.3.6.1.4.1.5812.6.8.1.25 circuitFwdTDParam200 Parameter 2 of the forward traffic descriptor of
type circuitFwdTdType.
For type Ethernet, this value corresponds to Bc.
For type …
1.3.6.1.4.1.5812.6.8.1.26 circuitFwdTDParam300 Parameter 3 of the forward traffic descriptor of
type circuitFwdTdType.
For type Ethernet, this value corresponds to Be.
For type …
1.3.6.1.4.1.5812.6.8.1.27 circuitFwdTDParam400 Parameter 4 of the forward traffic descriptor of
type circuitFwdTdType.
1.3.6.1.4.1.5812.6.8.1.28 circuitEndPoint2Protocol00 Protocol determines the connectionID.
1.3.6.1.4.1.5812.6.8.1.29 circuitBwdTDType00 Specifies the traffic descriptor type associated with
the backward traffic descriptor parameters. The backward
direction is 'out…
1.3.6.1.4.1.5812.6.8.1.30 circuitBwdTDParam100 Parameter 1 of the backward traffic descriptor of
type circuitBwdTdType.
For type Ethernet, this value corresponds to CIR.
For typ…
1.3.6.1.4.1.5812.6.8.1.31 circuitBwdTDParam200 Parameter 2 of the backward traffic descriptor of
type circuitBwdTdType.
For type Ethernet, this value corresponds to Bc.
For type…
1.3.6.1.4.1.5812.6.8.1.32 circuitBwdTDParam300 Parameter 3 of the backward traffic descriptor of
type circuitBwdTdType.
For type Ethernet, this value corresponds to Be.
For type…
1.3.6.1.4.1.5812.6.8.1.33 circuitBwdTDParam400 Parameter 4 of the backward traffic descriptor of
type circuitBwdTdType.
1.3.6.1.4.1.5812.6.8.1.34 circuitClassOfService00 Specifies the class of service for Data or non-TDM
circuits. This value is in the range of 0-7 where 1
has the highest priority …
1.3.6.1.4.1.5812.6.8.1.35 circuitAdminState00 Administrative state of the circuit. Circuits in the
disabled state do not consume network resources such as
bandwidth. The net…
1.3.6.1.4.1.5812.6.8.1.36 circuitOperState00 Aperational state of the circuit. Circuits in the
disabled state do not consume network resources such as
bandwidth. The networ…
1.3.6.1.4.1.5812.6.8.1.37 circuitTimeSinceStatusChange00 Gives the time (in seconds) since the most recent status change.
1.3.6.1.4.1.5812.6.8.1.38 circuitSetupPriority00 If there are insufficient network resources for establishing
all transport channels, this field specifies the priority of the
tra…
1.3.6.1.4.1.5812.6.8.1.39 circuitHoldPriority00 If a number of transport channels of a low Setup Priority need
to be cleared in order to release resources allowing for a higher…
1.3.6.1.4.1.5812.6.8.1.41 circuitPreferredEP1OptSlot00 If the circuit spans one or two rings, this is the slot number
of the first preferred ring. Preferred rings allow a manual over…
1.3.6.1.4.1.5812.6.8.1.42 circuitPreferredEP1OptPort00 If the circuit spans one or two rings, this is the port number
of the first preferred ring.
1.3.6.1.4.1.5812.6.8.1.43 circuitPreferredEP1OptVport00 If the circuit spans one or two rings, this is the lambda number
of the first preferred ring.
1.3.6.1.4.1.5812.6.8.1.44 circuitPreferredEP2OptSlot00 If the circuit spans two rings, this is the slot number
of the second preferred ring. Preferred rings allow a manual overide
of …
1.3.6.1.4.1.5812.6.8.1.45 circuitPreferredEP2OptPort00 If the circuit spans two rings, this is the port number
of the second preferred ring.
1.3.6.1.4.1.5812.6.8.1.46 circuitPreferredEP2OptVport00 If the circuit spans two rings, this is the lambda number
of the second preferred ring.
1.3.6.1.4.1.5812.6.8.1.47 circuitUseAlternateRing00 Allows operator to specify whether an alternate ring can
be used if the preferred ring(s) fail. This requires the
ability to loa…
1.3.6.1.4.1.5812.6.8.1.48 circuitInFrames00 Number of frames received at the ingress point and passed
on to the circuit.
1.3.6.1.4.1.5812.6.8.1.49 circuitInDEFrames00 Number of frames received at the ingress point and passed
on to the circuit.
1.3.6.1.4.1.5812.6.8.1.50 circuitInOctets00 Number of octets received at the ingress point and passed
on to the circuit.
1.3.6.1.4.1.5812.6.8.1.51 circuitInDEOctets00 Number of octets received at the ingress point and passed
on to the circuit.