Defines the Rate Increase Factor subfield for
inclusion in the ABR Setup Parameters information
element within Setup messages when initiating an ABR
SVCC-based RCC. This parameter is only used when
using ABR service for establishing SVCC-based RCCs,
and is ignored otherwise. The value of this parameter
specifies the requested rate increase factor, as
calculated by log2(32768 * RIF).
Parsed from file hjpnni.mib.txt
Company: None
Module: HJ-PNNI-MIB
Defines the Rate Increase Factor subfield for
inclusion in the ABR Setup Parameters information
element within Setup messages when initiating an ABR
SVCC-based RCC. This parameter is only used when
using ABR service for establishing SVCC-based RCCs,
and is ignored otherwise. The value of this parameter
specifies the requested rate increase factor, as
calculated by log2(32768 * RIF).
Parsed from file HJ-PNNI-MIB.mib
Module: HJ-PNNI-MIB
Vendor: Harris & Jeffries, Inc.
Module: HJ-PNNI-MIB
[Automatically extracted from oidview.com]
hjPnniNodeSvccAbrRateIncreaseFactor OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the Rate Increase Factor subfield for inclusion in the ABR Setup Parameters information element within Setup messages when initiating an ABR SVCC-based RCC. This parameter is only used when using ABR service for establishing SVCC-based RCCs, and is ignored otherwise. The value of this parameter specifies the requested rate increase factor, as calculated by log2(32768 * RIF)." DEFVAL { 11 } ::= { hjPnniNodeEntry 9 }
hjPnniNodeSvccAbrRateIncreaseFactor OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the Rate Increase Factor subfield for inclusion in the ABR Setup Parameters information element within Setup messages when initiating an ABR SVCC-based RCC. This parameter is only used when using ABR service for establishing SVCC-based RCCs, and is ignored otherwise. The value of this parameter specifies the requested rate increase factor, as calculated by log2(32768 * RIF)." DEFVAL { 11 } ::= { hjPnniNodeEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.603.2.10.2.7.3.1.1 | hjPnniNodeLoggingMask | 0 | 0 | A bit-mask indicating which classes of debug diagnostics are to be printed for this node. This mask is logically ANDed with the g… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.2 | hjPnniNodeMinDynamicPortId | 0 | 0 | The minimum value this node will assign to dynamically created port IDs, based on receipt of information over SVCC-based RCCs. For… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.3 | hjPnniNodeMaxDynamicPortId | 0 | 0 | The maximum value this node will assign to dynamically created port IDs, based on receipt of information over SVCC-based RCCs. For… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.4 | hjPnniNodeSvccCellTransferDelay | 0 | 0 | Defines the maximum acceptible Cell Transfer Delay for SVCC-based RCCs initiated by this node as the calling party. Used only wh… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.5 | hjPnniNodeSvccCellDelayVariation | 0 | 0 | Defines the maximum acceptible Cell Delay Variation for SVCC-based RCCs initiated by this node as the calling party. Used only w… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.6 | hjPnniNodeSvccCellLossRatio | 0 | 0 | Defines the maximum acceptible Cell Loss Ratio for SVCC-based RCCs initiated by this node as the calling party. Used only when i… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.7 | hjPnniNodeSvccAbrInitialCellRate | 0 | 0 | Defines the Initial Cell Rate subfield for inclusion in the ABR Setup Parameters information element within Setup messages when i… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.8 | hjPnniNodeSvccAbrTransientBufferExposure | 0 | 0 | Defines the Transient Buffer Exposure subfield for inclusion in the ABR Setup Parameters information element within Setup message… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.10 | hjPnniNodeSvccAbrRateDecreaseFactor | 0 | 0 | Defines the Rate Decrease Factor subfield for inclusion in the ABR Setup Parameters information element within Setup messages whe… |